F6661 - Watch FESTINA - Free user manual and instructions

Brand	Festina
Model	F6661
Product Type	Wristwatch
Display Type	Analog
Movement Type	Quartz
Case Material	Stainless Steel
Strap Material	Leather
Water Resistance	50 meters (5 ATM)
Glass Type	Mineral Crystal
Power Source	Battery (SR626SW or equivalent)
Battery Life	Approximately 2 years
Case Diameter	40 mm
Case Thickness	10 mm
Weight	80 g
Functions	Hours, minutes, seconds, date
Crown Type	Push/pull crown
Care Instructions	Clean with soft cloth; avoid contact with chemicals; keep away from magnetic fields
Warranty	2 years manufacturer warranty

Frequently Asked Questions - F6661 FESTINA

How do I set the time on my Festina F6661?

Pull the crown out to the second position (time-setting position). Turn the crown clockwise to set the hands. Push the crown back in after setting.

How do I set the date on my Festina F6661?

Pull the crown out to the first position (date-setting position). Turn the crown clockwise to adjust the date. Push the crown back in.

What type of battery does the Festina F6661 use?

It uses a SR626SW or equivalent button cell battery. We recommend having it replaced by a professional.

Is the Festina F6661 water resistant?

Yes, it is water resistant to 50 meters (5 ATM). It can withstand splashes and brief immersion, but not swimming or diving.

How should I clean my Festina F6661?

Use a soft, dry cloth to clean the case and strap. Avoid using harsh chemicals or abrasives. For leather straps, keep away from water.

What should I do if my watch stops running?

First, check if the crown is fully pushed in. If not, the battery may need replacement. Contact a certified watchmaker for battery replacement.

Can I swim with my Festina F6661?

No, the water resistance rating of 50 meters is not suitable for swimming or diving. It is designed for everyday use and splashes.

How do I replace the strap on my Festina F6661?

Use a spring bar tool to remove the old strap. Insert new strap with spring bars using the tool. Ensure the spring bars are securely in place.

What is the warranty period for the Festina F6661?

The watch comes with a 2-year manufacturer warranty covering defects in materials and workmanship. Retain your proof of purchase.

How do I adjust the metal bracelet length?

This model typically comes with a leather strap, not a metal bracelet. If you have a metal bracelet, use a pin pusher to remove links for adjustment.

USER MANUAL F6661 FESTINA

1. Be sure to Alarm switch OFF and pull the crown to the 1st Click Position.
2. Turn the crown clockwise to set the date.
3. After the date has been set, push the crown back to the normal position.
   * The date will be changed in the period from around 12:00 a.m. to around 3:30a.m. Pay attention since the date will not change when the setting of the alarm is checked and alarm time is set in this time zone.

Simple line drawing of a circular clock with four square buttons and a curved arrow indicating rotation (no text or symbols)

Pull the crown to the 2nd Click Position and turn the crown clockwise to set the time.

1. Second: If the crown is pulled out to the 2nd Click Position, the second hand will instantaneously move to the O position. When the second hand stands at between 0 and 29 seconds, the minute display will remain as before. When the second hand stands at between 30 and 59 seconds, the minute display will increase by 1 minute.
   * In case the second hand does not move to the O position even if the crown is pulled out to the 2nd Click Position, set the second hand to the O position by pushing the button A with the crown pulling out to the 2nd Click position. (A push of the button A m overs the second hand by one second scale.)

Simple line drawing of a circular clock with directional arrows indicating motion (no text or symbols)

IFM3S10IFM3S10

SETTING THE NORMAL TIME

1. Hour & Minute: If the crown is turned clockwise, the hands will go round counterclockwise. If the crown is turned counterclockwise, the hands will go round clockwise. Quick setting of time is possible by quickly turning the crown. If you want to stop the quick setting, turn the crown slowly.
   * Setting should be made so that the hands stands at the O position.
2. The time can be set accurately by returning the crown to the normal position in synchronization with a time signal.

CHRONOGRAPH

[Display changeover between normal time and chronograph]

If the button e is pressed in the normal time display, the confirming "beep" signal will sound and he second hand be returned to O position bringing about its switch-over to the state of chronograph time indication.

If the button e is pressed in this condition, the confirming "beep" signal will sound, and the respective hand for 2/100 second, minute and hour of each chronograph be returned to O position.

Then the second hand will give a changeover to the state of daily time indication. Even during this operation, the function of the daily time indication is progressing. Turn the crown clockwise to set the date. After the date has been set, push the crown back to the normal position.

[Normal time display] [Chronograph display]

IFM3S10IFM3S10

[How to use chronograph]

Max. measuring period of time : 11 hours 59 minutes 59 seconds 98.

graph LR
    A["Start"] --> B["Stop"]
    B --> C["Return to the O pos"]

1. Start: If the button A is pressed in the state of chronograph indication, the chronograph hands for 2/100 second, second, minute and hour will move with a confirmation sound. The chronograph 2/100 second hand alone will stop when three minutes pass after it starts, but it will continue to measure the time.

2. Stop: If the button A is pressed, all the hands will stop with a confirmation sound. The chronograph 2/100 second hand which has stopped will move and indicate the measured time.

3. Return to the O position: If the button B is pressed, all the chronograph and second hands will return to zero position and stop.

[Use as time integrator]

graph LR
    A["Start"] --> B["Return"] --> C["Stop"] --> D["Stop"]
    style A fill:#f9f,stroke:#333
    style B fill:#f9f,stroke:#333
    style C fill:#f9f,stroke:#333
    style D fill:#f9f,stroke:#333

The chronograph is changed over between Stop and Restart any number of times by repeatedly pressing the button A during measuring. Therefore use it as a measuring time integrator.

IFM3S10IFM3S10

[Zero position adjustment for chronograph 2/100 second hand]

If the chronograph 2/100 second hand should not return to zero position in the RESET state, take the following action.

1. Pull out the crown to the 2nd Click Position.
2. Push the button B and set the chronograph 2/100 second hand at its zero position.
   * The hand will advance by one graduation whenever the button A is pressed. If it continues to be pressed, the hand will quickly be forwarded..

USE AS ALARM

Both normal time and alarm time are displayed using the same hour and minute hands.

[Display changeover between normal time and alarm time]

1. If the alarm switch is pulled to ON and the crown is pulled at 1st Click Position, the hour & minute hands will run clockwise.
2. The position at which the running hands stop, indicates the set alarm time. A confirming "beep" signal will sound twice.
3. If the crown is pushed back to the normal position, the hour and minute hands will quickly get back to the normal time position. At this moment, a confirming "beep" signal will sound twice.
   * Even during this operation, the function of the daily time indication is progressing.

IFM3S10IFM3S10

[Display changeover between normal time and alarm time] [Setting of the alarm time]

graph TD
    A["1) Clock with square indicators"] --> B["2) Clock with arrow and square indicators"]
    B --> C["3) Clock with square indicators"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333

Alarm switch : ON
● Crown : the 1st Click Position
(Alarm time display)
Alarm switch : ON
● Crown : the 1st Click Position
Alarm switch : ON or OFF
Crown: the normal position

Time can be set on a 1-minute basis

●Alarm switch : ON
● Crown : the 1st Click Position

To set the alarm time, turn the crown in the same way as the setting of the normal time. If the crown is turned slowly, the minute hand can be set on a 1-minute basis. If the crown is pushed back to normal position, the indication will be returned to the normal time with confirmation "beep" sound.

[Alarm switch ON/OFF]

When the alarm switch is ON, the alarm will sound for 20 seconds twice a day. If the alarm switch is pulled out, the alarm is ON, and if pressed back, the alarm is OFF. To stop the alarm sound, push back the switch.

USE AS COUNTER

This function is available in the normal time display. It can count the number up to 50.

1. Whenever the button B is pressed, the chronograph 2/100 second hand will advance by one scale each time, displaying 50 at its maximum.
2. After the counter is used, make su reto return the chronograph 2/100 second hand to the O position by pushing the button B once or keeping pushing the button C.

USE AS TIMER

This function is available in the normal time display. The residual time up to 49 minutes can be measured.

graph LR
    A["Start Time"] --> B["Step 1: [Set time"] [Start timer] [Time is up]]
    B --> C["Step 2: [Time is up"]]

1. Set time: Set the chronograph 2/100 second hand at any desired residual time in the same way as the counter.
2. Start timer: Press the button A and the hand will start with a confirmation sound. The timer runs on a basis of 1-minute. When the residual time is within 50 seconds, the hand runs on a 1-second basis.
3. Time is up: When the hand comes to zero position, a confirmation "beep" signal will sound 10 seconds.

* Stopping timer halfway.

1. When it is working as a timer, press the button A and the hand will stop with a confirmation sound.

2. When it is not used as a timer, make su reto return the chronograph 2/100 second hand to the O position as per instruction [Use as counter].

By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making products must be selectively collected for processing. You may therefore dispose of your quartz watch making products at any of our retail outlets or any other authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and protecting our health.