HMS-250T.3 - Hand blender AFK - Free user manual and instructions

USER MANUAL HMS-250T.3 AFK

White kitchen mixer with whisk and coiled cord, no visible text or symbols

Hand Mixer with Bowl

Simple line drawing of a tool with a handle and a wavy handle, labeled 'Gear' (no other text or symbols)

Line drawing of a soldering iron with a curved handle and wavy cord (no text or symbols)

IMPORTANT INSTRUCTION:

1. Please read these instructions before operating this a liance and retain for future use.
2. Always ensure hands are dry before handing the lug or switching on the a liance.
3. Always use the a liance on a secure, dry level surface.
4. Always switch the unit off, un lug and wi e immediately should any moisture or liquid a ear on the motor housing.
5. Always switch off, un lug and allow moving arts to sto before removing or re lacing attachments.
6. Always avoid contact with moving arts whilst roduct is in o eration, kee hand, hair and clothing as well as other utensils away from moving arts during o erating.
7. Always switch off and un lug when not in use and before cleaning and storing.
8. Always remove all attachments before cleaning.
9. Always carry out regular checks of the suit cord to ensure if damage is evident. If the suit cord is damaged, it must be re laced by the manufacturer or its service agent or similarly qualified person in order to avoid hazard.
10. Never use this a liance outdoors.
11. Never use this a liance for other than intended use. .his a liance is for household use only.
12. Never use this a liance for anything other than food re aration.
13. Never immerse the motor base, cord set and lug in water or any other liquid to rotec against electrical hazards.
14. Never use harsh, abrasive or caustic cleaners to clean this a liance.
15. Never allow children to use this a liance. Close su ervision

is necessary when the a liance is near children.

1. Never leave a liance unattended when in use.

2. Never attempt to remove or replace any art of the hand mixer whilst it is in operation.

3. Never let cord hang over the edge of a table or counter touch hot surfaces or become knotted.

4. Never lace this a liance on or near a hot gas or electric burner or where it could touch a heated over or microwave oven.

5. Never use any attachment not supplied for use with this hand mixer.

6. Never mix a dry, thick or heavy mixture for more than 5 minute without turning of the hand mixer and stirring the ingredients before continuing.

22..his a liance can be used by children aged from 8 years and above and ersons with reduced hysical, sensory or mental ca abilities or lack of experience and knowledge if they have been given su ervision or instruction concerning use of the a liance in a safe way and understand the hazards involved.

1. Children shall not lay with the a liance.

2. Cleaning and user maintenance shall not be made by children unless they are older than 8 years and su ervised.

25.3ee the a liance and its cord out of reach of children less than 8 years."

22..he a liance is not intended to be o erated by means of an external timer or se arate remote1control system.

1. If the su ly cord is damaged, it must be re laced by the manufacturer, its service agent or similarly qualified ersons in order to avoid a hazard.

Structures

1. Ejection button
2. Speed control switch
3. Turbo button
4. Bracket
5. Tilt back head locking button
6. Beater
7. Base
8. Mixing bowl

1 2 3 4 5 6 7 8

Before using your Hand mixer-Set

1. Before use, unpack and remove all packaging. Retain the packaging and receipt until completely satisfied with your product.
2. Do not plug in the power cord and ensure that the 5-speed control switch is in the "0" OFF position.
3. Wash the beater and dough hooks in warm soapy water and dry thoroughly. Use a damp cloth to wipe over the mixer and dry with a soft clean cloth. Never immerse the mixer, cord set or plug in water or liquid of any kind. Never hold under water.
4. If not using immediately, see storage instructions within "Storage" section.

Operation of your Hand mixer-Set

Eject Button: This easy press button releases all attachments from the mixer sockets without any fuss. The eject button can only be pressed when the 5-speed switch is set in the “0” off position.

5-speed switch: .he switch has 51s eed settings (015) that can be selected for all your mixing tasks. .urn off the a liance after use by selecting the “0” Off osition.

Beaters and Dough Hooks: A air of beaters and dough hooks is supplied with the mixer.

.he beaters and dough hooks have a set method of fitting into the mixer socket because they are not identical and are interchangeable.

First select the beater or dough hook with gear.

Looking at the underside of the mixer and at the left hand socket insert the notched end of the beater or dough hook in an anticlockwise direction to locate the notch on the beater or dough hook correctly in the socket, while using it fully into the socket until a click is heard. .he beater or dough hook should be firmly fitted to the socket.

Simple line drawing of a tool with a handle and a wavy handle, labeled 'Gear' (no other text or symbols)

Simple line drawing of a tool with a handle and a curved handle (no text or symbols)

Note: Ensure the beater or dough hook are fully inserted into correct socket or your mixing result may be affected.

4sing a hand ress tilt back head locking button, then the head holder can be fixed.

When using mixing with the mixer and base have a set assembly method.

Setu 1, holding mixer fitting into the head holder.

Setu 2, lace the mixing bowl on the base.

Mixing Guide

Speed	Description
1,2 FOLD	Good starting s eed for soft ingredients such as flower, butter etc.
3 BLEND	Best s eed for liquid ingredients such as milk, sauces, salad dressings etc.
4 MIX	For mixing cake, cookies or bread dough
5 WHIP	For whi ing egg whites, whi ing cream etc

Operation:

1. Always set u your a liance on a dry, level and secure work surface.
2. Ensure that the mixer is unlugged and the mixer 51s eed switch is in the "0" OFF position.
3. Select the desired attachment and connect into the hand mixer, see "O eration of your Hand mixer1Set".
4. Ensure that the desired attachment is correctly fitted before lugging into a suitable mains outlet and adding your ingredients to the bowl.
5. Select the desired seed setting on the hand mixer using the 51s eed switch.
6. After processing the desired in ingredients, turn off the mixer in the "0" OFF position.
7. .o remove the attachment from the hand mixer, lace fingers loosely around the s indles and ress the eject button located at the front of the head of the mixer. .he attachment will then be released into your hand.

Care and Cleaning:

Before cleaning your mixer ensure that the ower is turned off at the ower outlet, then remove the lug. Always switch off and un lug before cleaning. Whi over the outside area of the mixer body with a dam ened cloth and olish with a soft, dry cloth Do not immerse the mixer body, lug or su ly cord in water or any other liquid.

Wi e any excess food articles from the ower cord.

.o make cleaning easier, remove beaters/dough hooks and rinse straight after use. Wash the beaters and dough hooks in warm soa y water.

.he beaters, dough hooks and bowl may be laced in the dishwasher. No other art of the a liance is dishwasher safe. Avoid using scouring ads, harsh detergents and abrasive, cleaners.

Dry with a soft, clean cloth.

Storage:

3ee your Hand mixer1Set in a convenient position in your kitchen to ready for use. Place the beaters and dough hooks in a drawer with other kitchen equipment.

Note: Never wind the ower cord around the motor after use as the warmth of the motor may cause damage to the ower cord.

Technical data

O erating voltage: 2201 2407\~50/20Hz

Power : 200W

Environment friendly disposal

.he symbol above and on the roduct means that the roduct is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.

.he Waste of Electrical and Electronic Equi ment (WEEE) Directive (2002/92/EC) has been ut in lace to recycle roducts using best available recovery and recycling techniques to minimise the im act on the environment, treat any hazardous substances and avoid the increasing landfill. Contact local authorities for information on the correct dis osal of Electrical or Electronic equi ment.

WAVNE INSTRUKCJE

Simple line drawing of a mechanical tool with a labeled 'Gear' point (no other text or symbols)

Line drawing of a pair of metal tools with no text or symbols

Simple line drawing of a tool with a handle and a wavy handle, labeled 'Gear' (no other text or symbols)

Simple line drawing of a tool with a handle and coiled spring (no text or symbols)

Simple line drawing of a tool with a curved handle and a labeled 'Gear' point (no other text or symbols)

Line drawing of a soldering iron with a curved handle and handle (no text or symbols)

La directive Waste of Electrical and Electronic Equipment (WEEE)