TS-853DU-RP - Server QNAP - Free user manual and instructions
Find the device manual for free TS-853DU-RP QNAP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Attached Storage (NAS) Server |
| Model Number | TS-853DU-RP |
| Brand | QNAP |
| Form Factor | Rackmount, 2U Height |
| Drive Bays | 8 x 3.5" SATA 6Gb/s, supports hot-swap |
| Processor | Intel Xeon D-1531, 8-core 2.2 GHz (turbo up to 2.7 GHz) |
| Memory | 8 GB DDR4 (expandable to 128 GB via 4 slots) |
| Network Interfaces | 2 x 10GbE SFP+, 2 x Gigabit RJ-45 |
| USB Ports | 1 x USB 3.2 Gen2 (10Gbps) front, 2 x USB 3.2 Gen2 rear |
| Power Supply | Redundant 500W (2 x PSU), hot-swappable |
| Dimensions (H x W x D) | 3.5 in x 18.9 in x 20.9 in (88.9 x 480 x 531 mm) |
| Weight (chassis only) | Approximately 28.7 lbs (13.0 kg) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Power Consumption (operating) | Approximately 100 W (typical) with drives installed |
| RAID Support | RAID 0, 1, 5, 6, 10, 50, 60, JBOD; online capacity expansion and migration |
| Supported File Systems | ext4, Btrfs, ZFS (via QTS/QuTS hero) |
| Maximum Storage Capacity | Up to 128 TB (8 x 16 TB drives) |
| Cooling Fans | 3 x 40mm hot-swappable fans |
| Operating System | QTS 5.x or QuTS hero (optional) |
| Main Features | iSCSI, VMware/Citrix/Hyper-V support, snapshots, backup, cloud gateway |
| Security Features | AES-256 encryption, antivirus, firewall, access control |
| Maintenance & Cleaning | Regular dust removal with compressed air; update firmware via QTS |
| Spare Parts & Repairability | Hot-swappable drives, PSU, fans; memory upgrade slots; full disassembly via service manual |
Frequently Asked Questions - TS-853DU-RP QNAP
What is the default IP address to access the QNAP TS-853DU-RP initially?
After connecting to the network, the device uses DHCP by default. You can find its IP address using the Qfinder Pro utility on your computer or by checking your router's DHCP client list.
How do I reset the administrator password on my QNAP TS-853DU-RP?
Press and hold the Reset button on the front panel for 3 seconds to reset the password to default (admin/admin). For a full factory reset, hold it for 10 seconds until you hear a long beep.
Can I use both 3.5' and 2.5' drives in this NAS?
Yes, the TS-853DU-RP supports both 3.5' SATA HDDs and 2.5' SATA SSDs/HDDs using the included drive trays. The trays have mounting holes for both form factors.
What RAID configurations are recommended for data redundancy?
For a balance of capacity and redundancy, RAID 5 (requires at least 3 drives) or RAID 6 (requires at least 4 drives) are common. For maximum performance and redundancy, consider RAID 10.
How can I expand the storage capacity without losing data?
You can replace existing drives with larger ones one at a time and rebuild the RAID, or add additional expansion enclosures via the built-in QNAP VJBOD (Virtual JBOD) technology. The QTS interface provides step-by-step guides.
How do I set up remote access to my NAS from outside the local network?
Enable the built-in QNAP CloudLink service (myQNAPcloud) to access your NAS via a personalized domain name. Alternatively, configure port forwarding on your router for specific services like FTP, VPN, or QNAP's QTS web interface.
What is the maximum RAM capacity and which modules are compatible?
The motherboard has four DDR4 DIMM slots, supporting up to 128 GB of ECC or non-ECC memory. Officially recommended modules include QNAP RAM modules or compatible third-party DDR4-2133/2400 SODIMMs.
How often should I update the NAS firmware?
It is recommended to check for updates monthly. Use the built-in Firmware Update tool in QTS to download and install the latest version. Always back up your configuration before updating.
Can I virtualize operating systems on this NAS?
Yes, the TS-853DU-RP supports virtualization via Virtualization Station, allowing you to run Windows, Linux, or other OSes as virtual machines. The Intel Xeon D-1531 provides ample CPU power.
What should I do if a hard drive fails?
If the NAS is configured with RAID redundancy, simply replace the failed drive with a new one of equal or larger capacity. The system will automatically rebuild the RAID array. Use the Storage Manager to monitor the process.
User questions about TS-853DU-RP QNAP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual TS-853DU-RP - QNAP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TS-853DU-RP by QNAP.