Stone 82374 - Toilets Schütte - Free user manual and instructions
Find the device manual for free Stone 82374 Schütte in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Toilet |
| Brand | Schütte |
| Model | Stone 82374 |
| Material | Vitreous China |
| Dimensions (L x W x H) | 60 x 40 x 80 cm |
| Weight | 35 kg |
| Flushing System | Dual Flush (3/6 liters) |
| Water Supply | Direct connection to mains |
| Seat Included | Yes, with soft-close mechanism |
| Bowl Shape | Elongated |
| Installation Type | Floor-mounted |
| Trap Way | 19 cm |
| Rough-in | Adjustable 10-20 cm |
| Color | White |
| Warranty | 2 years |
| Certifications | CE, ISO 9001 |
| Maintenance | Clean with mild detergent; avoid abrasive cleaners |
| Safety | Adhere to local plumbing codes during installation |
Frequently Asked Questions - Stone 82374 Schütte
How do I install the Schütte Stone 82374 toilet?
First, ensure the floor flange is prepared. Place the wax ring on the flange. Position the toilet over the flange, aligning the bolts. Press down gently to seal the wax. Secure with nuts and washers. Then connect the water supply line and tighten. Finally, attach the seat.
What tools are required for installation?
You will need an adjustable wrench, screwdriver, level, and a putty knife for scraping old wax.
How do I clean the toilet properly?
Use a mild bathroom cleaner or a mixture of vinegar and water. Apply with a soft cloth or sponge. Avoid abrasive scrubbers that can scratch the ceramic surface.
What is the water consumption per flush?
The dual flush system uses 3 liters for liquid waste and 6 liters for solid waste, helping save water.
Can I replace the toilet seat with a bidet seat?
Yes, the bowl shape is elongated and standard size, so most bidet seats with elongated design should fit. Check the mounting hole distance (usually 5.5 inches).
Why is my toilet making a hissing noise after flushing?
This is often due to a faulty fill valve. Try adjusting the float height or cleaning the valve seat. If the noise persists, replace the fill valve.
How do I fix a water leak at the base of the toilet?
A leak at the base usually indicates a worn wax ring. Remove the toilet, scrape off the old wax, install a new wax ring, and re-seat the toilet.
How do I adjust the water level in the tank?
Locate the float (either a ball or cup). Adjust the float arm screw to raise or lower the water level. The correct level is about 1 inch below the overflow tube.
Where can I find spare parts for this model?
Spare parts such as flush valve, fill valve, and seat are available through Schütte customer service or authorized dealers. Check the manual for part numbers.
What should I do if the flush is weak?
Ensure the water supply valve is fully open. Check if the rim holes are clogged with mineral deposits. Clean them with a wire or vinegar. Also verify the flapper chain has proper slack.
User questions about Stone 82374 Schütte
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Toilets in PDF format for free! Find your manual Stone 82374 - Schütte and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Stone 82374 by Schütte.
