GLD-DALI-LED-L-1X100W - LED driver Crestron - Free user manual and instructions
Find the device manual for free GLD-DALI-LED-L-1X100W Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Driver |
| Brand | Crestron |
| Model | GLD-DALI-LED-L-1X100W |
| Input Voltage | 100-277 V AC, 50/60 Hz |
| Output Power | 100 W |
| Output Current | Up to 700 mA (constant current) |
| Dimming Protocol | DALI (Digital Addressable Lighting Interface) |
| Number of Channels | 1 |
| Efficiency | >90% typical |
| Power Factor | >0.9 |
| Protection Features | Overload, short-circuit, over-temperature |
| Mounting | Indoor, dry location; surface mount |
| Dimensions (W x H x D) | 200 mm x 30 mm x 60 mm |
| Weight | 0.5 kg |
| Operating Temperature | -10°C to +50°C |
| Warranty | Limited lifetime |
| Certifications | UL, CE, RoHS |
| Included Accessories | Mounting bracket, screws |
Frequently Asked Questions - GLD-DALI-LED-L-1X100W Crestron
What is the input voltage range for the Crestron GLD-DALI-LED-L-1X100W?
The driver operates on an input voltage of 100-277 V AC at 50/60 Hz.
How do I connect the DALI control wires?
Connect the DALI bus wires (DA and DA) to the corresponding terminals on the driver. Ensure correct polarity and that the DALI bus is powered by a DALI power supply (typically up to 250 mA).
What is the maximum LED load this driver can handle?
The driver is rated for 100 W output at constant current up to 700 mA. The actual current can be set via DALI or by selecting the appropriate output tap.
Can I use this driver with a third-party DALI controller?
Yes, the driver is DALI-2 certified and compatible with any DALI-2 controller. It supports standard DALI commands like fade, scene control, and status feedback.
What protection features does the driver have?
It includes overload, short-circuit, and over-temperature protection. The driver will automatically shut down if any fault is detected and resume once the fault is cleared.
Is the driver suitable for outdoor use?
No, this driver is designed for indoor, dry location installation only. It should not be exposed to moisture or condensation.
How do I reset the driver after a fault?
Cycle the input power or send a DALI reset command. The driver will automatically recover after the fault condition (e.g., short-circuit) is removed.
What is the expected lifetime of this LED driver?
The driver has an expected lifetime of 50,000 hours at full load under typical operating conditions.
Can I dim the LEDs to 0% brightness?
Yes, the driver supports DALI soft-off (dimming to 0.1%) and can be commanded to turn off completely using the DALI OFF command.
Where can I find the user manual for the GLD-DALI-LED-L-1X100W?
The manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by email.
User questions about GLD-DALI-LED-L-1X100W Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your LED driver in PDF format for free! Find your manual GLD-DALI-LED-L-1X100W - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GLD-DALI-LED-L-1X100W by Crestron.