SN0148CO-AX-G - Server ATEN - Free user manual and instructions
Find the device manual for free SN0148CO-AX-G ATEN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Serial Console Server |
| Number of Serial Ports | 48 |
| Number of Network Ports | 2 (RJ-45, 10/100/1000 Mbps) |
| Form Factor | 1U Rackmount |
| Dimensions (W x D x H) | 484 x 300 x 44 mm |
| Weight | 3.2 kg |
| Power Input | AC 100-240V, 50/60Hz, 0.5A |
| Power Consumption | 25W (max) |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 0% to 80% RH, non-condensing |
| Management Interface | Web GUI, CLI, Telnet, SSH |
| Supported Protocols | TCP/IP, UDP, SNMP, DHCP, DNS, HTTP/HTTPS |
| Security Features | SSL/TLS, SSH, IP filtering, user authentication |
| LED Indicators | Power, Network, Serial port activity |
| Mounting Kit Included | Yes (19" rack ears) |
| Maintenance | Clean with dry cloth; avoid liquids; ensure proper ventilation |
| Safety Precautions | Do not expose to moisture; disconnect power before servicing |
| Spare Parts and Repairability | Contact ATEN support for replacement parts; no user-serviceable parts inside |
| General Information | Designed for remote management of serial devices; supports daisy-chaining |
Frequently Asked Questions - SN0148CO-AX-G ATEN
How do I perform initial setup of the SN0148CO-AX-G?
Connect the server to your network via the Ethernet port. Assign an IP address using the front panel LCD or DHCP. Access the web GUI by entering the IP in a browser. Default credentials are typically admin/admin.
What is the maximum number of devices I can connect?
The SN0148CO-AX-G supports up to 48 serial devices via its built-in serial ports. Each port operates at speeds up to 115200 bps.
Can I power the server using PoE?
No, this model requires standard AC power input (100-240V). It does not support Power over Ethernet.
How do I update the firmware?
Download the latest firmware from the ATEN support website. Access the web GUI, go to Maintenance > Firmware Update, and upload the file. Do not power off during the update.
Is the server compatible with Windows and Linux?
Yes, it is OS-independent. It can be managed via web browser or CLI, and works with any system that supports TCP/IP and Telnet/SSH.
What should I do if I forget the administrator password?
Press and hold the Reset button on the front panel for 10 seconds to restore factory defaults. This will reset all settings including the password.
Can I mount multiple units in a rack?
Yes, the 1U form factor allows stacking multiple units. Ensure proper ventilation between devices and do not exceed the rack's weight limit.
Does the server support SNMP monitoring?
Yes, it supports SNMP v1/v2c/v3 for network management. Configure SNMP settings under the Management section of the web GUI.
What types of cables are needed for serial connections?
Use standard RJ-45 to DB9 or RJ-45 to RJ-45 serial cables, depending on your device. Pinout diagrams are provided in the manual.
How do I clean and maintain the server?
Use a dry, soft cloth to clean the exterior. Ensure air vents are not blocked. Avoid using liquids or sprays. For internal cleaning, contact a qualified technician.
User questions about SN0148CO-AX-G ATEN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SN0148CO-AX-G - ATEN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SN0148CO-AX-G by ATEN.