VCAP8000 - Uncategorized Lanzar - Free user manual and instructions
Find the device manual for free VCAP8000 Lanzar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Amplifier |
| Model | VCAP8000 |
| Brand | Lanzar |
| Amplifier Class | Class AB |
| Number of Channels | 4 |
| RMS Power per Channel (4 ohms) | 100 Watts |
| RMS Power per Channel (2 ohms) | 150 Watts |
| Bridged RMS Power (4 ohms) | 300 Watts |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | < 0.05% |
| Signal-to-Noise Ratio | > 100 dB |
| Dimensions (W x H x D) | 16.5 x 2.0 x 10.2 inches |
| Weight | 5.5 lbs (2.5 kg) |
| Power Supply Voltage | 12 Volts DC (10-16V) |
| Fuse Rating | 30A |
| Input Sensitivity | 200 mV - 6V |
| Low Pass Filter | 40 Hz - 400 Hz |
| High Pass Filter | 15 Hz - 800 Hz |
| Subsonic Filter | 15 Hz - 40 Hz |
| Bass Boost | 0-18 dB |
| Protection Circuits | Short circuit, thermal, over-voltage |
Frequently Asked Questions - VCAP8000 Lanzar
What is the RMS power output of the Lanzar VCAP8000?
The VCAP8000 delivers 100 Watts RMS per channel into 4 ohms and 150 Watts RMS per channel into 2 ohms. In bridged mode, it provides 300 Watts RMS into 4 ohms.
What type of amplifier class does the VCAP8000 use?
The VCAP8000 uses a Class AB design, offering a good balance between sound quality and efficiency.
Does the Lanzar VCAP8000 have built-in crossover filters?
Yes, it features adjustable low-pass (40 Hz - 400 Hz) and high-pass (15 Hz - 800 Hz) filters, as well as a subsonic filter (15 Hz - 40 Hz) for fine-tuning your system.
What are the dimensions and weight of the VCAP8000?
The amplifier measures approximately 16.5 x 2.0 x 10.2 inches and weighs about 5.5 lbs (2.5 kg).
What is the recommended power supply for the VCAP8000?
It requires a 12V DC power source (10-16V range). A 30A fuse is recommended for protection.
Can I bridge channels on the Lanzar VCAP8000?
Yes, the amplifier supports bridging for channels 1-2 and 3-4. Bridged into 4 ohms yields 300W RMS per pair.
Does the VCAP8000 have a bass boost feature?
Yes, it includes a bass boost control adjustable from 0 to 18 dB at a center frequency of 45 Hz.
What protection features does the VCAP8000 have?
It includes short circuit, thermal overload, and over-voltage protection to safeguard the amplifier and your system.
What is the input sensitivity range of the VCAP8000?
The input sensitivity can be adjusted from 200 mV to 6V, allowing compatibility with a wide range of head units.
How should I clean and maintain the Lanzar VCAP8000?
Keep the amplifier dry and clean. Use a soft dry cloth to wipe the exterior. Ensure proper ventilation to prevent overheating. Check all connections periodically.
User questions about VCAP8000 Lanzar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual VCAP8000 - Lanzar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VCAP8000 by Lanzar.