TP-POE-48 - Carte réseau/Adaptateur Tycon Systems - Free user manual and instructions
Find the device manual for free TP-POE-48 Tycon Systems in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Power over Ethernet (PoE) Injector / Network Adapter |
| Model Number | TP-POE-48 |
| Input Voltage | 100-240V AC, 50/60Hz |
| Output Voltage | 48V DC |
| Maximum Power Output | 30W (IEEE 802.3af/at compliant) |
| Ports | 1x RJ45 (Data In), 1x RJ45 (Data + PoE Out) |
| Ethernet Standards | 10/100/1000 Mbps (Gigabit) |
| Dimensions (L x W x H) | 100mm x 60mm x 30mm (approx.) |
| Weight | 200g (approx.) |
| Material | Metal housing with plastic end panels |
| LED Indicators | Power (Green), PoE Active (Orange) |
| Surge Protection | Built-in surge protection for data and power lines |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 90% (non-condensing) |
| Safety Certifications | CE, FCC, RoHS |
| Maintenance | Wipe with dry cloth; no user-serviceable parts |
| Repair & Spare Parts | Contact Tycon Systems for replacement units |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - TP-POE-48 Tycon Systems
What is a PoE injector and how does it work?
A PoE injector adds power to an Ethernet cable, allowing devices like IP cameras or access points to receive both data and power through a single cable. The TP-POE-48 injects 48V DC onto the Ethernet pair.
Is the TP-POE-48 compatible with all PoE devices?
It is compatible with IEEE 802.3af/at compliant devices. Non-standard PoE devices may require a different injector. Check your device's voltage and power requirements.
What is the maximum distance for PoE?
Standard Ethernet cable (Cat5e or better) supports PoE up to 100 meters (328 feet). The TP-POE-48 does not extend this limit.
Can I use the TP-POE-48 with gigabit networks?
Yes, it supports 10/100/1000 Mbps (Gigabit) Ethernet, so it can be used with high-speed networks without data loss.
Does the TP-POE-48 come with a power cord?
Yes, it typically includes an AC power cord suitable for the region. Check your package contents.
How do I install the TP-POE-48?
Connect your network switch to the 'Data In' port, then connect your PoE device to the 'Data + PoE Out' port using an Ethernet cable. Plug in the power adapter. The LED indicators will confirm power and PoE status.
What do the LED indicators mean?
The Power LED (green) indicates the injector is receiving power. The PoE Active LED (orange) lights up when a compliant PoE device is connected and powered.
Is the TP-POE-48 surge protected?
Yes, it has built-in surge protection for both power and data lines to protect connected devices from voltage spikes.
What should I do if the injector gets hot?
Normal operation may produce some heat. Ensure adequate ventilation and do not cover the unit. If excessively hot, disconnect and contact support.
Can I use the TP-POE-48 outdoors?
It is not weatherproof. Use only indoors or in a protected enclosure. For outdoor use, consider Tycon's outdoor-rated PoE products.
User questions about TP-POE-48 Tycon Systems
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Carte réseau/Adaptateur in PDF format for free! Find your manual TP-POE-48 - Tycon Systems and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TP-POE-48 by Tycon Systems.