STV-32LED17 - Television Shivaki - Free user manual and instructions

Product Type	LED Television
Brand	Shivaki
Model	STV-32LED17
Screen Size	32 inches (81 cm)
Display Resolution	1366 x 768 pixels (HD Ready)
Aspect Ratio	16:9
Brightness	250 cd/m²
Contrast Ratio	3000:1
Viewing Angle	178° horizontal / 178° vertical
Power Consumption (Operating)	≤ 60 W
Standby Power Consumption	< 0.5 W
Weight (with stand)	Approx. 4.5 kg
Dimensions (with stand)	730 x 480 x 180 mm
Inputs	2x HDMI, 1x USB, 1x VGA, 1x AV, 1x RF (Antenna), 1x Headphone
Audio Output	2 x 8 W speakers
Supported Video Formats	MPEG-2, MPEG-4, H.264, etc.
Features	USB multimedia playback, VGA PC input, Subtitle support, Time settings, Audio settings (Treble, Bass, Balance), Signal Information
Safety	Read user manual for safety precautions
Cleaning	Use a soft dry cloth, avoid liquids
Repairability / Spare Parts	Contact authorized service center

Frequently Asked Questions - STV-32LED17 Shivaki

How do I connect an antenna to the TV?

Insert the antenna cable into the RF IN port on the back of the TV. Then go to the source menu and select DTV or ATV to start channel scanning.

How can I adjust picture and sound settings?

Press the MENU button on the remote. Navigate to Picture or Audio settings. You can adjust Treble, Bass, Balance, and picture modes like Standard, Music, etc.

How do I play media from a USB drive?

Insert the USB drive into the USB port. Press SOURCE and select USB. Use the remote to browse and play supported video, music, or photo files.

How do I connect the TV to a computer via VGA?

Connect the computer's VGA output to the TV's VGA port using a VGA cable. Also connect an audio cable (3.5mm) from the computer to the TV's PC AUDIO IN. Select VGA as the source.

How can I enable or change subtitles?

When watching a channel or file with subtitle data, press the SUBTITLE button on the remote. A menu will appear to select subtitle language or turn subtitles off.

How do I set the correct time on the TV?

Go to MENU > Settings > Time Settings. You can set the time manually or enable Auto sync from the broadcast signal.

What should I do if I see 'No Signal' on the screen?

Check that the correct source is selected (TV, HDMI, etc.). Ensure the antenna or external device is properly connected. Try re-scanning channels in DTV/ATV mode.

How can I reset the TV to factory settings?

Press MENU, go to Settings > Factory Reset or Reset. Enter the default password (usually 0000) and confirm. This will erase all custom settings.

How should I clean the TV screen?

Turn off the TV and unplug it. Use a soft, dry microfiber cloth to gently wipe the screen. Do not use water, alcohol, or any chemical cleaners.

The remote control is not working. What can I do?

Check the batteries and replace if needed. Ensure there are no obstacles between the remote and the TV sensor. Try resetting the TV by unplugging it for 30 seconds. If still not working, contact support.

USER MANUAL STV-32LED17 Shivaki

МЕРЫ БЕЗОПАСНОСТИ

Внимание

1. ИСТОЧНИК СИГНАЛА

УСТАНОВКА АНТЕННЫ

MEHIO

2.Treble (Тембр ВЧ) / Bass (Бас) / Balance (Баланс)

МЕНЮ

9. Signal Information (Информация о сигнале)

MEHIO

3. Subtitle (Субтитры)

МЕНЮ

6.Time Settings (Настройка времени)

MEHIO

МЕНЮ VGA SETTING (НАСТРОЙКИ ПК)

Music (Музыка)