CR 6506 - Cooker CAMRY - Free user manual and instructions

Product Type	Freestanding Cooker
Brand	Camry
Model	CR 6506
Width	60 cm
Depth	60 cm
Height	85 cm
Weight	Approximately 50 kg
Power Supply	220-240 V, 50/60 Hz
Power Consumption	Oven: 2.5 kW, Hob: 6 kW
Number of Hob Burners	4
Oven Type	Electric Fan Oven
Grill Function	Yes
Oven Capacity	65 Liters
Hob Type	Gas or Electric (check model variant)
Energy Efficiency Class	A
Cleaning Method	Enamel interior, easy to wipe
Safety Features	Flame failure device on gas hob, child lock
Door Type	Drop-down door with viewing window
Spare Parts Availability	Contact Camry customer service
Manual Included	Yes, in PDF format

Frequently Asked Questions - CR 6506 CAMRY

How do I ignite the gas hob burners?

Turn the corresponding knob to the 'ignite' position while pressing it down, then release once the flame appears. If it doesn't ignite, wait 5 seconds and try again.

What should I do if the oven doesn't heat up?

Check that the appliance is connected to the power supply and that the oven thermostat is set to a temperature. If the problem persists, consult the manual for troubleshooting.

How do I clean the oven interior?

Wait for the oven to cool, then wipe the interior with a damp cloth and mild detergent. Avoid abrasive cleaners.

Can I use aluminum foil in the oven?

Yes, but do not cover the oven bottom or heating elements as it may cause poor heat distribution and damage.

What type of gas can I use?

Natural gas or LPG depending on the injectors. Consult the manual for conversion instructions.

How do I replace the oven light bulb?

Disconnect the power, remove the glass cover over the bulb, and replace with a new oven bulb of the same type (usually 25W 300°C resistant).

Why is there a smell when using the oven for the first time?

This is normal. Run the oven empty at 200°C for about 30 minutes to burn off manufacturing residues. Ensure ventilation.

How do I set the timer on the cooker?

Turn the timer knob to the desired time (up to 120 minutes). The timer will ring when time is up but does not shut off the oven automatically.

What safety features does the CR 6506 have?

It includes a flame failure device on the gas hob that cuts off gas if the flame goes out, and a child lock on the oven door.

Where can I download the user manual?

Visit the official Camry website or notice-facile.com to download the manual in PDF format.

USER MANUAL CR 6506 CAMRY

Camry 7 1 2 3 4 5 6 7 High temp Low - Swap Hot Q-Fly Chewing dish W 2000 °C Up Function On/Off

ENGLISH

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different, if the device is used for commercial purpose.

1. Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.

2. The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.

3. The applicable voltage is 230V, \~50Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.

4. Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.

5.WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.

1. After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!

2. Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.

3. Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.

4. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.

5. Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.

6. Never use the product close to combustibles.

12.Do not let cord hang over edge of counter or touch hot surfaces.

1. Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.

2. In order to provide additional protection, it is recommended to install residue current

device (RCD) in the power circuit, with residual current rating not more than 30 mA.

Contact professional electrician in this matter.

1. If the ceramic surface is damaged or scratched, the device must be turned off to avoid possible electric shock.

2. Do not move the device if there is the vessel or the frying pan on it.

3. Do not heat the pot if it is empty.

4. Make sure that around the device is enough space (keep a distance of 5 to 10 cm from walls and other objects).

5. Never use the device on materials that are not heat resistant (carpet, linoleum).

6. Do not load paper or other material between the pot or pan and ceramic surface. The paper may catch fire.

7. Do not disconnect the unit from the electrical outlet immediately after cooking. The device needs at least a few seconds to cool down.

8. Do not connect the device to an external timer or remote control system.

9. On the cooker should not be used:

- pots and pans with a diameter of less than 12 cm,

- vessels on legs and with a rounded bottom (not flat bottom)

1. Do not place on the cooker, pots and pans which are heavier than 6kg.

2. Take care that the ventilation vents are always exposed. Obstructed vent may cause damage and even fire.

3. Do not use the appliance with a damaged surface.

1. Accessible surface temperatures can be high when the appliance is operating. Never touch the hot surfaces of the appliance.

DESCRIPTION OF THE DEVICE

1. hotplate

2. UP/DOWN button

3. display and controls

4. ON/OFF button

5. TIMER/PRESET button

6. FUNCTION button

7. ENERGY/VOLTAGE button

USING THE DEVICE

1. Connect the plug into an electrical outlet. You will hear a sound signal. The device goes into standby mode (4 flashing lines on the display) (7).
2. In the middle of the cooker (1) place the corresponding cooking utensil having a diameter less than 12 cm. Press ON/OFF button (2). The display (7) shows "ON" and you hear a sound signal. Select cooking mode by pressing FUNCTION button (3) until the controls will light up (7) to the desired mode. The oven offers:

2 automatic modes, in which there is no need to adjust the work time as the device finish work automatically. After selecting one of these modes the display (7) will show "AUFO". Auto modes are:

"Boil": use for rapid cooking. The unit switches to the power of 2000W and turns off after 15 minutes.

"Soup": use for slow cooking. The device heats and maintains the temperature for 90 minutes.

After selecting one of the automatic modes, by pressing the Timer/Preset button (5) you can preset the timer of the device turning on. Display will show "00:00". Use the UP/DOWN button (4) to set the desired time in the range of 1 minute - 12 hours, while pressing UP increases the time of 30 minutes, and pressing the DOWN button decreases it by 1 minute. After 5 seconds, the timer starts after which the cooker will start to work in the specified mode. To cancel this function, press the Timer/Preset button (5) again.

3 manual modes:

"Chafing dish" - when you select this mode, the display (7) shows the recommended power "2000". Use the UP/DOWN (4) to set the desired power from 200W to 2000W.

"Q-Fry" - when you select this mode, the display (7) shows the recommended temperature "650 °C". Use the UP/DOWN button (4) to set

the desired temperature in the range from 60 °C to 650 °C.

"Grill" - after selecting this mode, the display (7) shows the recommended temperature "450 °C". Use the UP / DOWN (4), you can set the desired temperature in the range from 60 °C to 650 °C.

After selecting one of the automatic modes, you can set the desired heating time by pressing Timer/Preset button (5). Display shows "00:00". Use the UP/DOWN button (4) to set the desired time in the range of 1 minute - 4 hours, while pressing UP button increases the heating time of 10 minutes, and pressing DOWN button decreases it by 1 minute. After 5 seconds, the timer starts after which the cooker will finish the work in the specified mode. To cancel this function, press the Timer/Preset button again (5).

During the operation in any mode after single pressing Energy/Voltage button (6) display will show the current power consumption of the device in kilowatt-hours, when you double-press the button it displays the voltage in volts.

1. To turn the cooker off, press the ON/OFF button (2), and then disconnect the cable from the power supply. Before touching the working surface allow the unit to cool down.

SAFETY

Thermal protection: when the temperature reaches 650 °C device switches itself automatically.

E5 error on the display indicates the device overheating. In this case, check if the ventilation vents are not obstructed. If the error persists, contact your service representative.

If you notice any errors, please contact the service.

CLEANING AND MAINTENANCE

1. The equipment should be cleaned after each use.
2. Disconnect the unit from the outlet and wait for it to cool down.
3. To clean the hotplate (1) do not use gasoline, thinner, brushes and paste. Wipe the device with a damp cloth and dishwashing agent.
4. Use a vacuum cleaner to remove dirt from the air inlet and vents.
5. The surface of the ceramic plate and control panel clean with a soft damp cloth and mild detergent for cleaning surface of the ceramic.
6. Make sure water doesn't sink into the device (if water gets into the device, it can lead to its destruction).
7. Do not immerse the device and the cable in water.

SPECIFICATIONS

Power supply: 230V \~ 50Hz

Power: 2000W

Device is made in class I of insulation and has to be connected only to power outlet with ground circuit.

Device is compliant with EU directives:

- Low voltage directive (LVD)

- Electromagnetic compatibility (EMC)

Device marked CE mark on rating label

To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Electrical appliance must be returned in order to reduce its reuse and utilization. If the device contains batteries they should be delivered to dedicated points separately.

DEUTSCH

BESCHRIJVING VAN HET APPARAAT

- EMC (Electromagnetic Compatibility)

Symbol of a trash bin crossed with a diagonal line, no text or numbers present