GT530AE - Chauffe-eau et chaudière DE DIETRICH - Free user manual and instructions
Find the device manual for free GT530AE DE DIETRICH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Combi boiler (water heater and central heating) |
| Brand | De Dietrich |
| Model | GT530AE |
| Fuel Type | Natural gas or LPG |
| Heating Output (Pmax) | 24 kW |
| Domestic Hot Water Output | 11 L/min at ΔT 30°C |
| Energy Efficiency Class | A (for heating) / A (for hot water) |
| Dimensions (H x W x D) | 700 x 400 x 300 mm |
| Weight | 28 kg |
| Electrical Supply | 230 V / 50 Hz |
| Electrical Power Consumption | 150 W |
| Water Connection | 15 mm (cold water inlet) / 15 mm (hot water outlet) |
| Central Heating Flow/Return | 22 mm / 22 mm |
| Control Interface | Digital display with push buttons |
| Functions | Central heating, domestic hot water, frost protection, summer/winter mode |
| Security Features | Flame failure safety device, overheat protection, low water pressure cut-off |
| Maintenance | Annual service by qualified technician recommended |
| Spare Parts Availability | Readily available through authorized dealers |
| Compatibility | Compatible with most radiators and underfloor heating |
Frequently Asked Questions - GT530AE DE DIETRICH
What does the error code E01 mean on my De Dietrich GT530AE?
Error E01 typically indicates a flame detection failure. Check the gas supply and ignition electrodes. If persistent, contact a technician.
How do I adjust the hot water temperature?
Press the 'DHW' button and use the +/- keys to set the desired temperature (range 35-60°C). Confirm with 'OK'.
Why is there no hot water?
Possible causes: no gas supply, low water pressure, or a blocked heat exchanger. Check the pressure gauge; if below 1 bar, repressurize the system.
Can I use the boiler during a power outage?
No, the boiler requires electricity to operate the control board, pump, and fans. It will not function without power.
How often should I service my GT530AE?
An annual service by a Gas Safe registered engineer is recommended to ensure safe and efficient operation.
What is the normal water pressure for the heating system?
The ideal pressure is between 1.0 and 1.5 bar when cold. If it drops below 0.5 bar, top up via the filling loop.
How do I reset the boiler after a fault?
Press and hold the 'Reset' button (usually marked with a circular arrow) for 3 seconds. If the fault persists, note the error code and consult the manual.
My radiators are not heating evenly. What should I do?
Bleed the radiators to remove trapped air. Also check that the system pressure is adequate and that all radiator valves are fully open.
Can I use antifreeze in the heating system?
Yes, but use only boiler-compatible antifreeze and follow the manufacturer's recommendations to avoid damage to seals and the heat exchanger.
Where can I find replacement parts for the GT530AE?
Contact your local De Dietrich authorized dealer or visit the official spare parts website. Provide the model number and serial number.
User questions about GT530AE DE DIETRICH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Chauffe-eau et chaudière in PDF format for free! Find your manual GT530AE - DE DIETRICH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GT530AE by DE DIETRICH.