T4403C - Range hood ETNA - Free user manual and instructions
Find the device manual for free T4403C ETNA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Etna |
| Model | T4403C |
| Mounting Type | Wall-Mounted |
| Width | 60 cm |
| Depth | 50 cm |
| Height (Min-Max) | 15 - 20 cm |
| Weight | 10 kg |
| Voltage | 220 - 240 V |
| Frequency | 50 Hz |
| Motor Power | 200 W |
| Max Extraction Rate | 600 m³/h |
| Noise Level (Max) | 65 dB |
| Grease Filter Type | Aluminum Mesh |
| Number of Filters | 2 |
| Lighting Type | LED |
| Number of Lights | 2 |
| Controls | Push Buttons |
| Speeds | 3 |
| Ducted / Recirculation | Ducted (optional recirculation kit) |
| Energy Class | A |
| Annual Energy Consumption | 60 kWh |
| Grease Filter Cleaning | Monthly in dishwasher or by hand |
| Charcoal Filter Replacement | Every 3-6 months (if recirculation) |
| Warranty | 2 years |
Frequently Asked Questions - T4403C ETNA
What is the recommended installation height above the hob?
For optimal performance, install the range hood between 65 and 75 cm above an electric hob and between 75 and 85 cm above a gas hob.
How do I clean the grease filters?
Remove the aluminum mesh filters and wash them in a dishwasher on a gentle cycle or by hand with warm soapy water. Ensure they are completely dry before reinstalling.
How often should I replace the charcoal filter?
If using the recirculation mode, replace the charcoal filter every 3 to 6 months, depending on usage. A saturated filter reduces performance.
Why is my range hood noisy?
Noise can be caused by loose ductwork, a clogged filter, or improper installation. Check that the unit is securely mounted and that filters are clean. Normal noise level is up to 65 dB.
Can I use the hood without ducting?
Yes, the T4403C can be used in recirculation mode with a charcoal filter (sold separately). This filters the air and returns it to the kitchen.
How do I change the LED lights?
LED lights are integrated and should be replaced by a qualified technician. Contact Etna customer service for assistance.
What size duct does the hood require?
The hood is designed for a 150 mm diameter duct. Use rigid or flexible ducting of the same diameter for best performance.
Does the hood have a remote control?
No, the T4403C is controlled via push buttons on the front panel. It does not include a remote.
How do I reset the filter saturation indicator?
After cleaning or replacing the filters, press and hold the speed button for 3 seconds until the indicator light turns off.
What is the power consumption in standby?
Standby power consumption is less than 1 W, meeting energy efficiency standards.
User questions about T4403C ETNA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual T4403C - ETNA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. T4403C by ETNA.
