6341.05 - Flash Ikelite - Free user manual and instructions
Find the device manual for free 6341.05 Ikelite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Underwater Flash Strobe |
| Model | 6341.05 |
| Brand | Ikelite |
| Dimensions (approx.) | 3.5 x 2.5 x 4.5 inches (89 x 64 x 114 mm) |
| Weight (with batteries) | 7.2 oz (204 g) |
| Power Source | 2x AA alkaline or NiMH batteries |
| Guide Number | 16 (ISO 100, feet) / 5 (ISO 100, meters) |
| Coverage Angle | 80° x 80° (full frame wide-angle) |
| Recycle Time | 4-6 seconds (fresh alkaline) |
| Number of Flashes per Set | 200+ (alkaline), 300+ (NiMH) |
| Exposure Control | Manual (full power, 1/2, 1/4, 1/8, 1/16) |
| Slave Sensor Sensitivity | Low, Medium, High |
| Connector Type | Ikelite ICS (5-pin) sync cord |
| Depth Rating | 200 feet (60 meters) |
| Mounting | 1/4-20 tripod mount, optional ball mount |
| Construction | Corrosion-resistant aluminum and polycarbonate |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Maintenance | Rinse with fresh water after saltwater use; lubricate O-rings annually |
| Spare Parts Available | O-rings, sync cords, battery tray, diffuser |
| Warranty | 1 year limited |
Frequently Asked Questions - 6341.05 Ikelite
What batteries does the Ikelite 6341.05 flash use?
The flash uses 2x AA batteries. Alkaline or NiMH rechargeable are recommended.
What is the guide number of this strobe?
Guide number is 16 (ISO 100, feet) or 5 (ISO 100, meters) at full power.
Can I use this flash with other camera housings?
Yes, it can be triggered via optical slave or wired sync cord with Ikelite ICS connector. Compatible with most cameras using appropriate connector.
How do I clean the flash after saltwater use?
Rinse the flash thoroughly with fresh water and dry before storage. Ensure O-rings are clean and lightly lubricated.
What is the maximum depth rating?
The depth rating is 200 feet (60 meters).
Does the flash have recycle time indication?
Yes, a ready light on the back indicates when the flash is fully recycled and ready to fire.
Can I adjust the power output?
Yes, power can be set manually to Full, 1/2, 1/4, 1/8, or 1/16.
What is the coverage angle?
The flash covers an 80° x 80° beam, suitable for wide-angle lenses.
Is there a sync cord included?
Typically the flash is sold without a sync cord. You need to purchase an Ikelite ICS sync cord separately if wired triggering is desired.
How many flashes can I get from a set of batteries?
Approximately 200-300 flashes depending on battery type and power settings.
User questions about 6341.05 Ikelite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Flash in PDF format for free! Find your manual 6341.05 - Ikelite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 6341.05 by Ikelite.