No532H - Receiver Mark Levinson - Free user manual and instructions
Find the device manual for free No532H Mark Levinson in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | Mark Levinson |
| Model | No532H |
| Dimensions (W x H x D) | 17.25 x 6.75 x 18 inches (438 x 171 x 457 mm) |
| Weight | 55 lbs (25 kg) |
| Power Output | 200W per channel into 8 ohms |
| Frequency Response | 20 Hz - 20 kHz ±0.1 dB |
| Total Harmonic Distortion | <0.02% |
| Inputs | 8 analog (including balanced XLR), 4 digital (2 optical, 2 coaxial) |
| Outputs | 5-way binding posts for speakers, preamp outs (RCA and XLR) |
| Power Consumption | 500W max |
| Power Supply | High-current toroidal transformer |
| Main Features | Fully balanced circuit design, discrete class A preamp, high damping factor |
| Maintenance & Cleaning | Wipe with soft dry cloth; avoid liquids; ensure ventilation grilles are unobstructed |
| Safety | Use grounded outlet; do not expose to moisture; disconnect during lightning storms |
| Spare Parts & Repairability | Contact authorized Mark Levinson service centers for genuine parts and repairs |
| General Information | Premium stereo receiver with advanced audio engineering for critical listening |
Frequently Asked Questions - No532H Mark Levinson
How do I connect my speakers to the No532H?
Use high-quality speaker cables with banana plugs or bare wire. Connect to the binding posts on the back, ensuring proper polarity (+/-).
What is the recommended impedance for speakers?
The receiver is stable with 4 to 8 ohm speakers. For best performance, use 8 ohm speakers.
Can I use the No532H as a preamp only?
Yes, the unit has preamp outputs. You can connect external amplifiers while still using the receiver's volume control and inputs.
How do I set up the balanced inputs?
Connect a source with XLR outputs to the balanced inputs. Ensure the input selector is set to the correct channel and the source outputs proper balanced signal.
Why is there no sound from one channel?
Check speaker connections, input source balance settings, and try swapping cables. If issue persists, test with a different source or perform a factory reset.
How do I reset the No532H to factory settings?
With the unit turned off, press and hold the Power button for 10 seconds until the display flashes. Release and turn on. All settings will be restored to default.
What is the maximum power consumption?
The receiver has a maximum power consumption of 500W. Ensure it is plugged into a suitable outlet.
Can I bi-amp my speakers with the No532H?
No, the receiver provides a single set of speaker outputs per channel. For bi-amping, use an external crossover and separate amplifiers.
How do I clean the receiver?
Use a soft, dry cloth to wipe the exterior. For grilles, use a gentle vacuum. Never use liquids or sprays.
Where can I find a service manual or schematics?
Schematics are available to authorized service centers. Contact Mark Levinson support directly for assistance.
User questions about No532H Mark Levinson
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual No532H - Mark Levinson and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. No532H by Mark Levinson.