No532 - Receiver Mark Levinson - Free user manual and instructions
Find the device manual for free No532 Mark Levinson in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | High-End Stereo Receiver |
| Dimensions (H x W x D) | 7.5 x 17.3 x 18.5 in (19 x 44 x 47 cm) |
| Weight | 75 lb (34 kg) |
| Power Output | 200W per channel into 8 ohms |
| Frequency Response | 20 Hz - 20 kHz ±0.1 dB |
| Signal-to-Noise Ratio | >95 dB |
| Total Harmonic Distortion (THD) | <0.01% |
| Inputs | 5x RCA, 2x XLR, 1x USB, 1x Ethernet, 1x HDMI (ARC) |
| Outputs | 1x Pre-out, 1x Subwoofer, 1x Headphone |
| DAC Type | ESS Sabre 32-bit Reference |
| DSD Support | DSD64/128/256 |
| Audio Formats | FLAC, ALAC, WAV, AIFF, DSD |
| Power Consumption | 100W (standby), 800W (max) |
| Remote Control | Infrared (IR) with learning function |
| App Control | iOS/Android via Mark Levinson Remote App |
| Finish Options | Brushed Aluminum Black or Silver |
| Warranty | 5 years parts and labor |
Frequently Asked Questions - No532 Mark Levinson
How do I connect my Mark Levinson No532 to a power amplifier?
Use the pre-amplifier outputs via XLR or RCA cables. Ensure the receiver is in preamp mode. Refer to the setup guide for details.
What is the recommended speaker impedance for the No532?
The No532 is designed for 4-8 ohm speakers. For optimal performance, use speakers with nominal impedance of 8 ohms.
Can I use the No532 as a standalone DAC?
Yes, the No532 can function as a standalone DAC via USB or coaxial/optical inputs. Select the appropriate input and disable the amplifier section if desired.
How do I update the firmware on my No532?
Connect to your home network via Ethernet, then navigate to the settings menu and select 'Firmware Update'. Alternatively, use a USB drive with the update file downloaded from the Mark Levinson website.
What should I do if there is no sound from the speakers?
Check that the input source is selected correctly and the volume is not muted. Verify speaker connections and ensure the receiver is not in protect mode. If the issue persists, try a factory reset.
Can the No532 decode Dolby Atmos?
The No532 is a stereo receiver and does not support multi-channel formats like Dolby Atmos. It focuses on high-fidelity two-channel audio.
How do I clean the Mark Levinson No532?
Use a soft, dry microfiber cloth to gently wipe the exterior. Do not use any solvents or abrasive cleaners. For ventilation grills, use a soft brush or vacuum with a brush attachment.
What is the purpose of the 'Direct' mode?
Direct mode bypasses tone controls and unnecessary circuitry for the purest audio path. It is ideal for critical listening when you want the most accurate sound reproduction.
Does the No532 support Bluetooth streaming?
No, the No532 does not include Bluetooth. It supports wired connections and network streaming via UPnP/DLNA and Roon Ready. For wireless streaming, use an external Bluetooth receiver connected to an input.
Where can I find the serial number on my No532?
The serial number is located on the back panel near the power cord or underneath the unit. You will need it for registration and warranty service.
User questions about No532 Mark Levinson
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual No532 - Mark Levinson and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. No532 by Mark Levinson.