ACR5166TN - Air-conditioner PHILIPS - Free user manual and instructions
Find the device manual for free ACR5166TN PHILIPS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Air Conditioner |
| Brand | Philips |
| Model | ACR5166TN |
| Cooling Capacity | 12000 BTU (approx. 3.5 kW) |
| Power Supply | 220-240 V, 50 Hz |
| Power Consumption (Cooling) | 1100 W (approx.) |
| Dimensions (W x D x H) | 44 x 35 x 70 cm |
| Weight | 25 kg |
| Refrigerant | R32 |
| Noise Level (Low/High) | 52 / 56 dB(A) |
| Air Flow (Max) | 420 m³/h |
| Functions | Cooling, Dehumidification, Fan, Sleep Mode, Timer, Remote Control |
| Dehumidification Capacity | 1.5 L/h |
| Timer Range | 1 - 24 hours |
| Remote Control | Included (batteries not included) |
| Filter | Washable mesh filter |
| Maintenance | Clean filter every 2 weeks; drain condensate as needed |
| Safety Features | Auto shut-off, overheat protection, child lock |
| Spare Parts | Replacement filter (part no. FY3120), remote control |
| Repairability Index | 7.5 / 10 |
| EAN | 8710103730284 |
Frequently Asked Questions - ACR5166TN PHILIPS
How do I clean the filter?
Open the front panel, remove the filter, wash it with lukewarm water and mild detergent, dry it completely, and reinstall. Clean every 2 weeks for best performance.
How do I set the timer?
Press the Timer button on the remote or control panel. Use the +/- buttons to set the desired hours (1-24). Press Timer again to confirm.
Why is the unit not cooling?
Check if the filter is dirty, ensure the exhaust hose is properly connected and not blocked, and verify that all windows and doors are closed. Also check the set temperature is lower than room temperature.
How do I drain the water?
Portable ACs usually evaporate most condensate. If draining is needed, locate the drain plug at the bottom, attach a hose, and direct it to a drain. Some models have a continuous drain option.
What does error code E2 mean?
Error E2 typically indicates a frozen evaporator coil. Turn off the unit, let it thaw for a few hours, and ensure the filter is clean. If it persists, contact support.
The remote control is not working.
Replace the batteries with fresh AAA batteries. Ensure the infrared sensor on the unit is not blocked. Point the remote directly at the unit within 5 meters.
Can I use an extension cord?
It is not recommended. Use a direct wall outlet rated for the unit's power (10A minimum). Extension cords may cause voltage drop and overheating.
What is the best temperature setting for sleep?
Press the Sleep mode button. The unit will gradually increase the temperature by 1-2°C over a few hours for comfortable sleep and energy savings.
How do I install the exhaust hose?
Attach the hose connector to the back of the unit, then extend the hose to the window kit. Ensure the window kit is properly sealed to prevent hot air from re-entering.
Where can I find replacement filters?
Contact Philips customer support or check online for filter part FY3120. Always use genuine parts for best performance.
User questions about ACR5166TN PHILIPS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual ACR5166TN - PHILIPS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ACR5166TN by PHILIPS.
