SLATTUM 705.712.42 - Bed IKEA - Free user manual and instructions

Product Type	Bed frame
Model	SLATTUM 705.712.42
Brand	IKEA
Dimensions (Width x Length x Height)	Approx. 90 x 200 x 30 cm (35.4 x 78.7 x 11.8 in)
Weight	Approx. 25 kg (55 lbs)
Materials	Pine, fiberboard, steel hardware
Maximum Load Capacity	120 kg (265 lbs)
Assembly Required	Yes, full assembly required
Tools Required	Hex key (included), hammer (optional)
Power Supply	None (non-electric)
Primary Functions	Support mattress and bedding for sleeping
Mattress Compatibility	Standard single mattress (90 x 200 cm)
Care & Cleaning	Wipe with a damp cloth and mild detergent; dry thoroughly
Safety Warnings	Follow assembly instructions; check screws periodically; do not use as a step
Spare Parts Availability	Contact IKEA customer service or visit IKEA store
Repairability	Modular design; parts can be replaced individually
Intended Use	Domestic indoor use only
Warranty	2 years (check IKEA warranty policy)

Frequently Asked Questions - SLATTUM 705.712.42 IKEA

What are the dimensions of the IKEA SLATTUM bed?

The SLATTUM bed frame (model 705.712.42) has approximate dimensions of 90 cm width, 200 cm length, and 30 cm height (35.4 x 78.7 x 11.8 inches). It is designed for a standard single mattress (90 x 200 cm).

What is the maximum weight capacity of the SLATTUM bed?

The maximum load capacity (including mattress and user) is approximately 120 kg (265 lbs). Do not exceed this weight to ensure safety and durability.

Does the SLATTUM bed require assembly?

Yes, the bed requires full assembly. All necessary hardware and an instruction manual are included. We recommend following the step-by-step instructions and using the provided hex key.

What materials is the SLATTUM bed made of?

The frame is primarily made of pine and fiberboard, with steel hardware for fastening. The slatted base is typically included but may need separate purchase; confirm with IKEA.

Can I use any mattress with the SLATTUM bed?

The bed is designed for a standard single mattress of 90 x 200 cm. Using a mattress of different dimensions may not fit properly. Also, ensure the mattress thickness does not exceed the side rails.

How do I clean and maintain the SLATTUM bed?

Clean the bed frame by wiping with a damp cloth and a mild detergent. Dry immediately. Do not use harsh chemicals or abrasive cleaners. Periodically check and tighten any loose screws.

Is the SLATTUM bed suitable for children?

Yes, but adult supervision is required during assembly. Ensure the bed is properly secured and check that all components are tightly fastened. The bed is not intended for commercial or institutional use.

What tools are needed for assembly?

A hex key (Allen wrench) is included. You may also need a hammer (not included) for some steps. The instruction manual lists all required tools.

Can I order spare parts for the SLATTUM bed?

Yes, spare parts are available through IKEA customer service or at IKEA stores. Have the product name (SLATTUM) and article number (705.712.42) ready when contacting.

Does the SLATTUM bed come with a warranty?

IKEA offers a 2-year warranty on most bed frames. This covers manufacturing defects but not damage from misuse or normal wear. Check your local IKEA warranty policy for details.

USER MANUAL SLATTUM 705.712.42 IKEA

Line drawing of a simple bed with slatted backrest and two legs (no text or symbols)

Simple line drawing of a figure crossed with a hammer and crossed a diagonal line, standing on a stack of books (no text or symbols)

Simple line drawing of two figures standing with tools, no text or symbols present

Simple line drawing of a bird perched on a box with two crossed lines, no text or symbols present.

Simple line drawing of a bird perched on a rectangular platform with a base, no text or symbols present.

Simple line drawing of a person with a hammer and book, thinking, next to a question mark (no text or symbols)

Illustration of a threaded screw with a circular head and hexagonal end (no text or symbols)

2x

Technical line drawing of a bolt with threaded shaft and hexagonal head (no text or symbols)

4x

20x

8x

4x

Technical line drawing of a mechanical component with no visible text or symbols

2x2x

Line drawing of a bent tool or rod with a hexagonal end, labeled '130445' on the side (no other text or symbols)

2

3

4

5

6

7

8

9

Line drawing of a bed with two panels, one showing a side panel and the other a close-up view (no text or symbols)

10

11

12

Technical line drawing of a bed frame assembly with mounting brackets and structural details (no text or symbols)

13

14

15

16