ASX18AW30N - Air-conditioner BOSCH - Free user manual and instructions
Find the device manual for free ASX18AW30N BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner (Cooling & Heating) |
| Model | ASX18AW30N |
| Brand | Bosch |
| Cooling Capacity (BTU/h) | 18,000 BTU/h |
| Cooling Capacity (kW) | 5.27 kW |
| Heating Capacity (BTU/h) | 18,000 BTU/h |
| Heating Capacity (kW) | 5.27 kW |
| Energy Efficiency Rating (Cooling) | A++ |
| Energy Efficiency Rating (Heating) | A+ |
| Refrigerant Type | R32 |
| Indoor Unit Dimensions (W x H x D) | 900 x 300 x 215 mm |
| Outdoor Unit Dimensions (W x H x D) | 800 x 550 x 300 mm |
| Indoor Unit Weight | 10.5 kg |
| Outdoor Unit Weight | 31.5 kg |
| Power Supply | 220-240 V, 50 Hz, 1 Phase |
| Operating Modes | Cool, Heat, Fan, Dehumidify, Auto |
| Key Features | Timer, Sleep Mode, Turbo Function, Self-Diagnosis, Auto Restart, Filter Clean Indicator |
| Air Flow (Indoor Unit) | Up to 600 m³/h |
| Indoor Noise Level (Low/High) | 25 dB(A) / 45 dB(A) |
| Outdoor Noise Level | 55 dB(A) |
| Filter Type | Washable, Anti-Bacterial |
| Maintenance | Clean filter every 2 weeks; professional cleaning recommended once a year |
| Safety Features | Auto Restart, Overheat Protection, Voltage Protection |
| Spare Parts Available | Remote control, filters, drainage hose |
| Warranty | 2 years (check local terms) |
Frequently Asked Questions - ASX18AW30N BOSCH
How do I clean the air filter on my Bosch ASX18AW30N?
Turn off the unit and open the front panel. Remove the filter by sliding it out. Rinse under lukewarm water, dry thoroughly, and reinsert. Clean every 2 weeks for optimal performance.
What does the 'Filter Clean' indicator mean?
It reminds you to clean the air filter. After cleaning, press the 'Filter Reset' button on the remote (or hold the 'Timer' button for 3 seconds) to turn off the indicator.
How do I use the timer function?
Press the 'Timer' button on the remote. Use '+' or '-' to set the desired ON or OFF time. The indicator on the unit will flash to confirm.
What should I do if my air conditioner is not cooling?
Check if the filter is clean, ensure the thermostat is set below room temperature, and verify the outdoor unit is not obstructed. If the issue persists, contact a professional.
Can I install the Bosch ASX18AW30N myself?
It is recommended to have a qualified technician install the unit to ensure proper refrigerant handling, electrical connections, and drainage. Improper installation may void warranty.
What is the operating temperature range for heating?
The heating function operates effectively between -15°C and 24°C outdoor temperature. Below -15°C, heating capacity may be reduced.
How do I reset the remote control?
Remove the batteries, press any button for 5 seconds, then reinsert the batteries. If the remote still malfunctions, replace the batteries with new ones.
What type of refrigerant does this air conditioner use?
It uses R32 refrigerant, which is more environmentally friendly than R410A. Always use qualified personnel for servicing.
Why is water leaking from the indoor unit?
Check if the drainage hose is blocked or kinked. Also ensure the unit is level. If the problem continues, contact a technician to inspect the drain pan.
How do I activate the 'Turbo' mode?
Press the 'Turbo' button on the remote. The unit will run at maximum power for 30 minutes to quickly reach the desired temperature. It will then return to normal operation.
User questions about ASX18AW30N BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual ASX18AW30N - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ASX18AW30N by BOSCH.
