SRK35MHIP1 - Measurement MITSUBISHI - Free user manual and instructions

Product Type	Split Air Conditioner (Heat Pump)
Model	SRK35MHIP1 (Indoor Unit) / SRC35MHIP1 (Outdoor Unit)
Cooling Capacity	3.5 kW (12,000 BTU/h)
Heating Capacity	4.0 kW (13,650 BTU/h)
Power Supply	220-240 V ~ 50 Hz, Single Phase
Rated Current (Cooling)	5.2 A
Rated Current (Heating)	5.8 A
Energy Efficiency Ratio (EER)	3.21 W/W
Cop (Heating)	3.45 W/W
Indoor Unit Dimensions (WxHxD)	834 x 295 x 208 mm
Indoor Unit Weight	8.5 kg
Outdoor Unit Dimensions (WxHxD)	662 x 430 x 278 mm
Outdoor Unit Weight	24.0 kg
Refrigerant Type	R32
Refrigerant Charge	0.7 kg
Maximum Piping Length	20 m
Maximum Height Difference	12 m
Airflow Rate (High)	10.0 m³/min
Sound Pressure Level (Indoor High)	42 dB(A)
Sound Pressure Level (Outdoor)	48 dB(A)
Operating Modes	Cool, Heat, Fan, Dry, Auto
Fan Speeds	3 (Low, Medium, High) + Auto
Controller Type	Infrared Remote Control (included)
Maintenance	Clean air filter every 2 weeks
Safety Features	Overload protection, auto restart, child lock

Frequently Asked Questions - SRK35MHIP1 MITSUBISHI

How do I clean the air filter on my Mitsubishi SRK35MHIP1?

Open the front panel, remove the filter, vacuum or wash with mild detergent, dry completely, and reinstall. Clean every 2 weeks under normal use.

What is the recommended temperature setting for cooling?

For energy efficiency, set the thermostat to 24-26°C (75-79°F) during cooling mode.

How do I use the timer function?

Press the TIMER button on the remote to set the unit to turn on or off after a specified time (0.5 to 24 hours).

What does the 'Econo' mode do?

The Econo mode reduces power consumption by limiting compressor operation, ideal for sleep or when maximum cooling is not needed.

Why is my air conditioner not cooling properly?

Check if the air filter is dirty, if the set temperature is too high, if doors/windows are open, or if the unit is in Fan mode. Also ensure the outdoor unit has clearance.

How do I set the fan speed?

Press the FAN button on the remote repeatedly to cycle through Low, Medium, High, and Auto speeds.

Can I install the air conditioner myself?

No, professional installation is required. It involves refrigerant handling, electrical wiring, and structural mounting. Contact a qualified technician.

What is the 'Swing' feature?

The Swing function automatically moves the vertical louvers up and down to distribute air evenly throughout the room.

How do I turn off the beep sound?

On the remote control, look for a Silent or Beep Off button. If not available, refer to the manual for a combination of buttons.

What should I do if the remote control is not working?

Ensure the batteries are fresh and inserted correctly. Point the remote at the indoor unit receiver. If still not working, try resetting the unit by turning off the circuit breaker for 30 seconds.

USER MANUAL SRK35MHIP1 MITSUBISHI

SRK25MHIP1/SRC25MHIP1

SRK35MHIP1/SRC35MHIP1

The following table is in Chinese:

便之顯示“”

- 送風運轉過程中不能進行經濟運行。

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), if the GT contains lines used for stylistic emphasis or as background elements (like ruled paper), the OCR result must ignore them. The provided OCR content is "____", which consists of four underscores. This is incorrect because underscores are not equivalent to a solid line and are not permitted under the “Stylistic/Background Lines (Ignore)” rule. Outputting underscores for a stylistic line violates the rule and constitutes an error. Therefore, the OCR result is inconsistent with the Ground Truth.

。

室内機的固定

①将管道通通接

●如何從安裝板上拆下室內機

MHI. DWG. NO. | RYD012A343 | 20

室外機的安裝