ZX 50 - Water filter ASTRALPOOL - Free user manual and instructions
Find the device manual for free ZX 50 ASTRALPOOL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Filter |
| Brand | AstralPool |
| Model | ZX 50 |
| Category | Pool Filtration System |
| Filtration Capacity | Up to 50 m³/h |
| Maximum Flow Rate | 50 L/min |
| Maximum Pressure | 2.5 bar |
| Filter Type | Cartridge Filter |
| Power Supply | 230 V ~ 50 Hz |
| Power Consumption | 500 W |
| Dimensions (H × W × D) | 600 × 400 × 500 mm |
| Weight | 15 kg |
| Material | Reinforced plastic and stainless steel |
| Operating Temperature | 5°C to 40°C |
| Inlet/Outlet Diameter | 50 mm (2") |
| Cable Length | 1.5 m |
| Protection Class | IPX5 |
| Noise Level | < 60 dB(A) |
| Maintenance | Clean filter cartridge every 1-2 weeks |
| Spare Parts Available | Filter cartridge (model ZX-50-C) |
| Certifications | CE, TÜV |
| Warranty | 2 years |
Frequently Asked Questions - ZX 50 ASTRALPOOL
How do I install the ZX 50 filter?
Install the filter on a level surface near the pool pump. Connect the inlet and outlet pipes (50 mm diameter) using the included unions. Ensure all connections are tight. Plug the unit into a grounded outlet. Refer to the manual for detailed diagrams.
What is the recommended filter cartridge replacement interval?
Replace the cartridge every 12 months or when pressure drop exceeds 0.5 bar. Regular cleaning every 1-2 weeks prolongs its life.
Can I use the filter with a saltwater pool?
Yes, the ZX 50 is saltwater-compatible. However, rinse the cartridge with fresh water after each use to prevent salt buildup.
How do I clean the filter cartridge?
Turn off the filter and disconnect power. Remove the cartridge and rinse with a garden hose from the inside out. Use a soft brush if needed. Allow to dry before reinstalling.
What should I do if the filter is not running?
Check power supply and circuit breaker. Ensure the pump is primed. Inspect the filter for clogs. If the motor hums but doesn't start, the capacitor may need replacement.
Is the filter suitable for above-ground pools?
Yes, the ZX 50 is designed for both above-ground and in-ground pools up to 50 m³ volume.
What is the maximum operating pressure?
The maximum operating pressure is 2.5 bar. Do not exceed this to avoid damage.
Can I bury the filter underground?
No, the filter must be installed above ground to allow access for maintenance and prevent water ingress. It is not rated for burial.
How often should I check the filter pressure gauge?
Monitor the pressure gauge weekly. Clean the cartridge if pressure rises 0.5 bar above normal. Replace cartridge if pressure remains high after cleaning.
What spare parts are available for the ZX 50?
Available spare parts include replacement filter cartridges (model ZX-50-C), O-rings, pressure gauge, and pump motor assembly. Contact AstralPool customer service.
User questions about ZX 50 ASTRALPOOL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water filter in PDF format for free! Find your manual ZX 50 - ASTRALPOOL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZX 50 by ASTRALPOOL.