688172 - Pizza oven CaterChef - Free user manual and instructions

Product Type	Pizza Oven
Brand	CaterChef
Model	688172
Dimensions (W x D x H)	59 x 56 x 43 cm
Voltage	230 V / 50 Hz
Power	3000 W
Temperature Range	+50 to 350 °C
Heating Elements	3 (top, middle, bottom) - separately controlled
Timer	Up to 2 hours
Number of Baking Chambers	2 (double version)
Control Panel	Switches and thermostats
Material	Stainless steel (inferred)
Safety Features	Overheat protection, automatic shut-off, grounded plug required
Usage	Professional (hotels, markets, etc.)
Cleaning Instructions	Switch off, unplug, allow to cool, remove chamotte bases, wipe with damp cloth; do not immerse or use steel brush
Cooling Time	At least 30 minutes after switching off
Included Accessories	Chamotte bases
Warranty	Valid only if instructions followed; damage from misuse voids warranty

Frequently Asked Questions - 688172 CaterChef

Why does the pizza oven switch off by itself during operation?

This is likely due to the overheat protection feature. Allow the oven to cool down completely, ensure the ambient temperature is between 20-25°C, and restart. If the problem persists, contact a service technician.

What is the maximum temperature of the CaterChef 688172?

The maximum temperature is 350°C. The oven heats up very quickly, so monitor the temperature closely.

How do I preheat the oven correctly?

Set the lower (and middle, if using) thermostat to the desired temperature, at least 200°C. The orange indicator light will turn off once the temperature is reached. Preheat for a few minutes before placing food inside.

Can I use both baking chambers at the same time?

Yes, the double version (688172) has two separate chambers with independent controls. You can use both simultaneously or just one to save energy.

How should I clean the pizza oven after use?

First, switch off the oven and unplug it. Allow it to cool completely. Remove the chamotte bases. Clean the interior with a damp cloth and a small amount of detergent. Dry thoroughly. Never rinse with water or use a stainless steel brush.

Is it safe to move the oven while it's hot?

No, never move the oven during operation or while it is still hot. Wait until it has cooled down completely (at least 30 minutes after switching off) before moving it.

What should I do if the oven does not start?

Check that the plug is properly inserted into a grounded electrical outlet. Ensure the thermostat is set to a temperature. If it still does not start, contact a qualified technician.

How can I save energy when using the double version?

If you are not using the upper baking chamber, activate only the lower and middle thermostats. This reduces power consumption while still providing sufficient heat for the bottom chamber.

What accessories come with the pizza oven?

The oven includes chamotte bases (pizza stones) that should be placed inside before use. They help distribute heat evenly for better cooking results.

How long should I let the oven cool down before cleaning?

After switching off the oven, allow it to cool for at least 30 minutes. The oven can remain very hot during this period. Do not touch any parts except the control panel and door handle until it has cooled completely.

USER MANUAL 688172 CaterChef

PIZZA OVEN

Modelnr.: *688.170 - *688.172

Front view of a CaterChef electric stove with control knobs and a warning symbol (no readable text or labels)

Front view of a CaterChef electric oven with two rectangular panes and warning symbols (no readable text or labels)

Thank you for choosing and purchasing our product.

Before starting up, please read this manual carefully in order to ensure the correct and safe installation and usage. Damage caused by not following the instructions of this manual will always invalidates the warranty.

INDEX

General....6

Basic specifications .... 6

Transport and storage....6

Safety precautions and usage environment 7

Safety Instructions 7

Parts overview 8

Circuit diagram....8

Users instructions 8

Troubleshooting 9

Cleaning and maintenance: 9

GENERAL

CaterChef's pizza oven is having characteristics of up-to-date style, reasonable structure, convenient operation, fast heating, uniform temperature, energy-saving etc. It's therefore mainly suitable for professional usage in hotels, markets, super-markets and other events.

Caterchef wants to emphasize that the instruction manual needs to be readed carefully before usage and should be stored for later use.

BASIC SPECIFICATIONS

Model	Dimensions (cm)	Voltage (V)	Power (W)	Thermostat
*688.170	59x56x26(H)	230	2000	+50/350 °C
*688.172	59x56x43(H)	230	3000	+50/350 °C

TRANSPORT AND STORAGE

During transport, the product should be placed carefully. Make sure you prevent any drastic vibration during transport. You should never place or store these (packed) products outdoor for a long period of time (no longer than a few hours in the event of an emergency), but in an well-ventilated warehouse without corrosive gasses. When you need to store them temporarily outside, you should take measures to protect them from rain or moisture. As long as they are packed, please make sure you never place them upside down. This could damage the appliance and cause therefore danger.

SAFETY PRECAUTIONS AND USAGE ENVIRONMENT

1. This product should be placed in a balanced and well ventilated spot and its left and right sides should be free from obstacles for more than 10cm. Its back-side should be free from the obstacles (like a brick wall etc) for more than 20cm.
2. The power pressure of this equipment should conform to the supply voltage of the power supply of this product (230V/50Hz).
3. The user should install the suitable power switch, fuse and leakage-protector near to the equipment.
4. During operation, do not place any stuff in front of the appliance to make sure it could be operated at any time needed. This is a safety instruction.
5. Before usage, this equipment must be connected (safe) to a grounded socket.
   Before starting up, you should check whether the socket you want to use is grounded.
6. Before usage you should check whether all components, like the chamotte bases, are available and whether the appliance is not damaged.
7. Make sure whether all the connections of all the electric elements of the product are firm or not, and whether the safety grounding is reliable or not.
8. When you change the power cable, you should select the same model cable and: it is only allowed to let a professional electrician do this.
9. If you need to (re)connect, repair or maintain the appliance, do not do this by yourself. This is forbidden. This must always be done by a professional electrician.
10. You are able to adjust the temperature to the required degree scale to let the food reach the ideal cooking temperature.
11. If there are any abnormal phenomenons during usage, you must stop the appliance directly. After checking you can continue to use it as long as it is safe. Do not repair the appliance by yourself. This should always been done by a technical professional.

SAFETY INSTRUCTIONS

Degrease:

1. Before operating, clean the device from the inside with a wet cloth and a small amount of detergent. Be careful not to touch the fan and heating element during cleaning.
   In addition, make sure that you have dried it properly before you start operating the device.
2. Replace the chamotte bases of the device and then heat the device for 5 minutes at it's highest temperature.
3. After you have finished this process, please allow the device to cool down. Please note that it is okay if a small amount of smoke is released.

Regular use:

1. Only place food and no non-food items in the device. What we for example mean with non-food: tools, baking trays, paper or foil; etc.

2. Do never cover the appliance with foil, this could cause overheating and therefore danger.

3. Never leave the surroundings of the appliance during operation.

4. Never move the appliance during its operation.

5. Never touch the appliance (besides the control panel and door handle) during its operation.

6. When disconnecting the device from the power, never pull on the cord, only the plug.

7. Cooling down: After usage (and after turning the switch off), the appliance needs to cool down for a minimum time of 30 minutes. To prevent any burning injuries or other danger, do not touch, move or use the appliance during this period of time.

8. After usage, press on the switch to turn it off.

9. After usage the electricity needs to be cut from the socket to prevent fire hazard. Make sure the switch is turned off before you cut the electricity from the socket, this to prevent short circuit or danger.

10. When you move the product from its place, always pick it up from the lower side of the appliance.

11. Never use other parts than the ones which are from CaterChef. CaterChef is not taking any responsibility for damage caused by the use of other (non-related) parts.

12. During operation or cooling down: always keep the appliance out of reach of children. This, mainly to prevent danger and burning injuries.

PARTS OVERVIEW

USERS INSTRUCTIONS

Note: Only place food on the shelves belonging to this device and do not place non-food products inside the device. This can be dangerous and is therefore prohibited.

Note: The device can become very hot, you should not touch it during use and during the cooling period without an professional oven glove.

Pay attention!

1. The maximum temperature is 350°C. The temperature rises very quickly.
2. Preheat the pizza oven from 200 to 300°C before placing food in it.
3. The timer can be set up to 2 hours.
4. The double version has 3 heating elements (one at the bottom, one in the middle and one at the top) and the single version has 2 (one at the bottom and one at the top). Each heating level can be controlled separately.
5. If you have the double version (model 688172) and if you do not use the upper baking chamber, you can save energy by activating only the lower and middle thermostats.

Preheating the oven:

1. Press the switch, the appliance will turn on.
2. Press the light switch, it will turn on.
3. Preheating can be done by activating only the lower (and middle) thermostat. Turn it to the desired temperature of at least 200^ C. The oven will reach the desired temperature very quickly. The orange indicator light will illuminate until the heating element has reached the desired temperature. It is recommended to activate the upper thermostat after preheating.

Single use

If you plan to use the pizza oven only once or if you want to save energy, use it as follows:

1. Insert the plug into the wall socket;
2. Turn the light switch to ON;

3. Turn the lower thermostat to the desired temperature and preheat the oven;

4. After preheating, you can activate the other thermostats;

5. Then set the timer to the desired cooking time;

6. Then turn the ON/OFF switch to OFF;

7. After the cooking time has elapsed, the oven will stop heating automatically.

8. As soon as the oven has cooled down completely and the plug has been removed from the socket, you can start to clean or maintain the oven.

Uninterrupted use

1. Insert the plug into the wall socket.
2. Turn the light switch to ON.
3. Turn the lower thermostat to the desired temperature and preheat the oven.
4. After preheating, you can activate the other thermostats.
5. Then set the timer to the desired cooking time.
6. After the cooking time has elapsed, the oven will continue to heat.
7. As soon as you turn the switch to OFF and you are no longer using the timer, the oven will automatically stop heating and thus start to cool down.
8. As soon as the oven has cooled down completely and the plug has been removed from the socket, you can start to clean or maintain the oven.

TROUBLESHOOTING

Problem Possible causes Solutions
The device switches itself off.	The device reaches an unsafe temperature.	First allow the appliance to cool down completely, make sure the ambient temperature does not exceed 20-25°C and restart the oven.
The device does not start.	The plug is not properly inserted in the socket.The thermostat is not set.	Make sure the device is connected to a grounded electrical outlet.Set the temperature with the thermostat.
There is a metallic noise during use.	Something is wrong with the parts.	Do not dismantle the device yourself and contact your local service technician first.
The cooking result is not satisfactory.	The thermostat is defective/does not work properly.	Contact your local dealer or service technician to view the thermostat.

CLEANING AND MAINTENANCE:

Step 1: After usage, the device must first be switched off, after which you must remove the plug from the socket. Always do this in the order described. This could prevent short circuit or other possible dangers.

Step 2: Wait until the device has cooled down completely.
Step 3: Remove the parts such as the chamotte bases.
Step 4: Clean the inside of the device with a wet cloth and then dry it thoroughly.

Pay attention! Do not rinse the device with water. (Don't wash it underneath the water tap).

This could damage the device and lead to dangerous situations.

Never clean the device with a stainless steel brush. This causes scratches and damages the device.

Always store it inside and keep it dry.

According to Waste of Electrical and Electronic Equipment (WEEE) directive, WEEE should be separately collected and treated. If at any time in future you need to dispose of this product please do NOT dispose of this product with household waste. Please send this product to WEEE collecting points where available.