F4152CW - Freezer GORENJE - Free user manual and instructions

Product Type	Chest Freezer
Brand	Gorenje
Model	F4152CW
Energy Class	A+
Annual Energy Consumption	220 kWh
Net Capacity	150 L
Dimensions (H x W x D)	85 x 100 x 60 cm
Weight	45 kg
Climate Class	SN-T
Noise Level	42 dB
Defrost Type	Manual
Temperature Control	Mechanical dial
Fast Freeze Function	Yes
Interior Light	Yes
Door Lock	Yes with key
Storage Drawers	1 wire basket
Power Supply	220-240 V / 50 Hz
Power Cord Length	1.5 m
Refrigerant	R600a
Maintenance	Clean interior with mild soap and water; defrost when ice thickness exceeds 5 mm
Safety	Do not use electric heaters or sharp objects for defrosting
Spare Parts Availability	Via authorized service centers

Frequently Asked Questions - F4152CW GORENJE

How to set the temperature on my Gorenje F4152CW freezer?

The temperature is controlled by a mechanical dial inside the freezer. Turn it to a higher number for colder temperature. Typically, setting 3-4 is recommended for normal use.

How to defrost the freezer?

Unplug the freezer, remove all food, and leave the lid open. Place towels to absorb water. Do not use sharp objects or heaters. Clean and dry before restarting.

What does the red warning light mean?

The red light indicates that the internal temperature is too high, often due to a power failure or open lid. Once the temperature drops to normal, the light turns off automatically.

How to install the freezer?

Place the freezer on a level, stable surface away from heat sources. Allow at least 10 cm clearance on all sides for ventilation. Let it stand upright for 2 hours before plugging in.

Why is my freezer making noise?

Normal operation includes sounds from the compressor, fan, and refrigerant flow. If loud or unusual noises occur, check if the freezer is level and objects are not touching the compressor.

How can I save energy with the freezer?

Keep the lid closed as much as possible, avoid overfilling, and defrost regularly. Ensure the door seal is clean and intact. Set temperature to 4-5 for everyday use.

What is the capacity of the Gorenje F4152CW?

The net capacity is approximately 150 liters, suitable for medium-sized households.

Does the freezer have a lock?

Yes, it comes with a lock and key. The key is located in the user manual or attached to the product.

What is the warranty period?

Gorenje typically offers a 2-year warranty for domestic use. Check your purchase documents for exact terms.

What to do if the freezer stops cooling?

First, check the power supply and fuse. Ensure the dial is not set to '0'. If it still does not cool, contact customer service. Do not attempt to repair yourself.

USER MANUAL F4152CW GORENJE

Skříňová mraznička Zamražarka szufladowa Vol'ne stojaca mraznička Álló fagyasztó Arka ngrirëse Вертикален фризер Zamrzivač Upright Freezer Congelator vertical Zamrzovalna omara Vertikalni zamrzivač

Wichtige Hinweise D

Before fi rst operation GB

• The appliance is manufactured in compliance with all relevant safety standards; however, it is recommended that persons with impaired physical, motional, or mental abilities, or persons with inadequate experience and knowledge, do not use the appliance without due supervision. The same recommendation applies to minors using the appliance.
• Warning: Ventilation slots on the appliance or built-in element should always be kept clean and unobstructed.
• Warning: Do not use any mechanical accessories when thawing the refrigerator, except for those explicitly recommended by the manufacturer.
• Warning: To prevent any pollution be careful not to damage the insulation or refrigeration tubes at the rear wall during the installation, cleaning and disposal of the appliance.
• Warning: Do not use any electrical devices inside the appliance, except for those explicitly recommended by the manufacturer.
  • After the installation, the appliance mains plug should be accessible!

D	E	F	G	H	I
660 mm	1 080 mm	80 mm	50 mm	135°-145°	900 mm

Montáž madla

Údržba a čištění

D	E	F	G	H	I
660mm	1080mm	80mm	50mm	135°-145°	900mm

Inštalácia rukoväte

Popis spotrebiča

Údržba a čistenie

Rozmrazovanie mrazničky

D	E	F	G	H	I
660mm	1080mm	80mm	50mm	135°-145°	900mm

D	E	F	G	H	I
660 mm	1080 mm	80 mm	50 mm	135° -/145°	900 mm

Instalimi i dorezë

1. Evitoni tapotē e vidhave nga dera.

D	E	F	G	H	I
660mm	1080mm	80mm	50mm	135° -145°	900mm

Монтаж на дръжката

Описание на уреда

5

6

7

1

8

- Uređaj opremljen ventilacijskom mrežom, možete postaviti bliže zidu. Mreža osigurava pravilnu cirkulaciju zraka, potrebnu za nesmetan i pravilan rad kondenzatora.

Montaža drške

1. Skinite poklopce vijaka sa vrata

2. Pomoću dva vi jika pričvrstite dršku

3. Vratite zaštitne poklopce vijaka

Opis uređaja

1. Kućište
2. Ladice za zamrzavanje
3. Kompresor (na stražnjoj strani uređaja)
4. Podesive nožice
5. Radna površina
6. Elektronska ploča za upravljanje
7. Brtva vrata
8. Sklop vrata

Rukovanje uređajem

1. Pažljivo podignite gornji pokrov za 5 cm, izvadite vodiče elektronskih spojeva, i zatim odstranite pokrov.

1. Odvijte tri vijka, zatim izvadite gornju šarku koja vrata drži u svom položaju. Podignite vrata i položite ih na meku površinu, pazeći da se ne ogrebu.

1. Odvijte vijke donje šarke i odstranite šarku i podesive nožice.

1. Odvijte i odstranite klin donje šarke, okrenite položaj konzole i vratite je nazad.

1. Pričvrstite konzolu na klin donje šarke, zatim ponovno montirajte obje podesive nožice.

- Unutrašnjost zamrzivača obrišite spužvom i čistom krpom.

Čišćenje uređaja

Prije čišćenja prekinite dovod električne energije u uređaj.

Za čišćenje nemojte koristiti gruba i agresivna sredstva za čišćenje, jer možete oštetiti površinu. Nakon čišćenja pazite da odstranite sve ostatke sredstva za čišćenje.

• Vanjski dio uređaja čistite vodom i tekućim deterdžentom.
• Unutarnjost uređaja operite mlačnom vodom, kojoj ste dodali malo vinskog octa.

Thank you for your trust and for buying this appliance. We hope it will successfully serve the purpose for many years.

5 HIULJ HUDWRU□Z LWK□IUHH] HU□LV□IRU□GRP HVWLF□XVH□RQ□

Before Putting Into Use .... 2

Instructions for Use

We Care for the Environment

Tips for Energy Saving

Important 3

Placing and Installation 4

Placing the Appliance

Connection to Power Supply

Description of the Appliance 6

Using the freezer....6

Electronic front control panel.... 7

Use....8

Freezing Fresh Foods

Changing the Direction of Opening the Door10

Maintenance and Cleaning....12

Cleaning the Appliance

Switch Off the Appliance When Not in Use

Trouble Shooting Guide 13

Before Putting Into Use

• Before connecting the appliance to the mains supply, leave it stand for about 2 hours which will reduce the possibility of malfunctions in the cooling system that might have occurred due to transport handling.
• Clean the appliance thoroughly, especially the interior (see Cleaning and Maintenance).

Instructions for Use

These instructions for use were prepared for the user. They describe the appliance and its correct and safe use. They were prepared for various types/models of appliances therefore you might find in it description of some functions and accessories that do not apply to your appliance.

We Care for the Environment

• Our products use environmentally friendly packaging, which can be either recycled or disposed of in an environmentally friendly manner. To this end, individual packaging materials are clearly marked.
• These instructions are printed either on recycled paper or chlorine free bleached paper.

- When your appliance finally wears out, please try not to burden the environment with it; call your nearest authorised service agent. (See Disposing of the Worn Out Appliance)

Tips for Energy Saving

• Try not to open the door too often, especially when the weather is wet and hot. Once you open the door, mind to close it as soon as possible. This is especially important if you have an upright model.
• Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance).
• Turn the thermostat knob from higher to lower setting as soon as possible (depends on how loaded the appliance is, ambient temperature...)
• Never use continuous operation unless unnecessarily required; switch the operation mode selection switch to the setting for automatic operation as soon as possible.
• Before freezing packages of fresh foods, make sure they are cooled to ambient temperature.

• Ice and frost layer increase energy consumption, so do clean the appliance as soon as the layer is 3-5 mm thick.

• If the gasket is damaged or if it turns out that the sealing is poor, the energy consumption is substantially higher. To restore efficiency, replace the gasket.

• The condenser on the rear wall should be always clean, free of dust or any impurities.

- Always consider instructions stated in sections Positioning and Energy Saving Tips, otherwise the energy consumption is substantially higher.

Important

- The appliance is manufactured in compliance with the effective safety standards. However, it can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Mind to connect the appliance correctly to the mains supply (see Connection to the Mains Supply).

Do not touch the cooled surfaces while the appliance operates, especially not with wet hands, because the skin might stick to the cold surfaces.

Do not freeze bottled drinks, especially not e fizzy ones such as mineral water, sparkling wine, beer, cola etc., because liquid expands during freezing and the glass bottl is very likely to blow up.

Never try to eat frozen food (bread, fruit, vegetables), because you may get frostbites.

Carefully check the foods for color and smell and if you are in doubt about their quality, throw them away because they may be

- spoiled and therefore dangerous to eat. Disconnect the appliance from the mains before repairing (only a qualified technician should repair it) and before cleaning.

Do not defrost the appliance with other electric devices (hair dryer etc.) and never scrape the ice or frost layer with sharp tools Use only enclosed tools or tools

- recommended by the manufacturer. For the sake of environment protection - be careful not to damage the rear wall of the appliance (the condenser unit or the tubes for example when moving the appliance) or any part of the refrigerating system inside the appliance.

The refrigerating system of the appliance is filled with refrigerant and oil, so when the appliance is damaged, handle it with care and dispose it of in compliance with environmental protecting precautions. (See

We Care for the Environment).

- Heating element incorporated in the appliance, all around the rim, is controlled by the operation of the compressor and it prevents the door gasket to freeze on to the freezer compartment.

- When activating the "Super" function, the red light may turn on. This is normal condition and there is no need for warning.

- If the supply cord is damaged, it must be replaced by the manufacturer or his service agent or a qualified person in order to avoid hazard.

- The rating plate is in the interior or on the rear wall of the appliance.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Storing Time During Power Supply Interruption

Avoid opening the freezer in case of failure or power supply interruption! In case the interruption is extended over longer period of time, take food out of the freezer and use it, or make sure it remains well cooled (perhaps you have an extra appliance).

Disposing of the Worn Out Appliance

- When your appliance finally wears out, dispose it of. If the appliance has a lock, break it, in order to prevent eventual accidents (danger of children get locked inside the appliance).

- The refrigerating system of the appliance is filled with refrigerant and insulating substances which should be separately treated and processed. Call your nearest authorised service agent or specialised servicing centre. If you don't find one, contact your local authorities or your distributor. Be careful not to damage the tubes on the rear wall of the appliance (danger of pollution).

Placing and Installation

Choosing the Right Place

Place the appliance in a dry and regularly ventilated room. Allowed ambient temperature depends on the model (class) of the appliance and is stated on the rating plate of the appliance.

Never place the appliance near heat emitting devices (e.g. cooker, radiator, water heater and similar devices) and do not expose it to direct sunlight.

The appliance should be positioned at least 3 cm away from the electric or gas cooker and at least 30 cm away from the oil or coal stove. If this is not possible, use an appropriate insulation.

Behind the appliance there should be free space at least 200 cm ² wide and above the appliance the high kitchen units should be at least 5 cm away from the appliance in order to assure adequate ventilation of the condenser unit.

Class	Ambient temperature
SN (sub-normal)	from + 10°C to + 32°C
N (normal)	from + 16°C to + 32°C
ST (sub-tropical)	from + 16°C to + 38°C
T (tropical)	from + 16°C to + 43°C

Placing the Appliance

- Place the appliance firmly on a solid base. Level it with the two adjustable feet, located on the front.

- The appliance with ventilation grid may be placed close to the wall. The grid enables sufficient air circulation, required for adequate ventilation of the rear wall.

Connection to Power Supply

Connect the appliance with the cable and plug to the power supply socket outlet with a ground terminal (safety socket).

Required nominal voltage and frequency are indicated in the rating plate. The connection to the mains supply and earthing have to be made according to current standards and regulations. The appliance resists temporary voltage tolerance up to -6 to +6 %.

Installing the appliance

D	E	F	G	H	I
660mm	1080mm	80mm	50mm	135°-145°	900mm

Handle installation

1. Take off screw covers from the door

Description of the Appliance

1. Cabinet
2. Drawers
3. Compressor(at the back of cabinet)
4. Adjustable Feet
5. Worktop
6. Electronic front control panel
7. Door Gasket
8. Door assembly

Using the freezer

This appliance is designed to conserve frozen foods, to freeze fresh food and to make ice-cubes.

Do not freeze a large quantity of food at any one time, as the faster an item is frozen, the more it will keep its qualities. Similarly, make sure that you wrap your foodstuffs before freezing, so that they retain their full flavour and do not spoil the other products.

The conservation time for frozen foods depends on the type of food. Refer to the instructions on the packaging.

Never place hot foods in your freezer. Never place bottles or drinks cans in it either, as they can burst when their contents freeze.

Highly carbonated drinks can even explode! NEVER keep lemonade, fruit juice, beer, wine, champagne, etc. in the freezer compartment.

Electronic front control panel

MODE function:

• When firstly push "MODE" button, the lamp of "FAST" is lighted on, appliance would be fast freezing and the LED displays "SF".
• When secondly push "MODE" button, the lamp of "FAST" is blacked down and the lamp "ECO" is lighted on, appliance would go into "ECO" mode. It will run at -16°C and the LED will display "SE".
• Third push makes "ECO" mode black out and the appliance will go back to user setting mode.

TEMPERATURE setting:

- Push "°C" button, the LED number would light so you could adjust the temperature level by pressing "°C" button. The setting cycle runs like following -16 °C, -17 °C, -18 °C, -19 °C, -20 °C, -21 °C, -22 °C. Each temperature level is confirmed after keeping it for 5 seconds.

LOCK option of the buttons:

- Pushing “MODE” button and °C “TEMPERATURE SETTING BUTTON at the same time for 3 seconds makes buttons go into LOCK mode and symbol lights. In order to unlock the buttons, push “MODE” button and °C “TEMPERATURE SETTING BUTTON at the same time for 3 seconds.

DOOR OPEN alarm:

- If the freezer door is opened for more than 5 minutes, the should alarm will be on and will end as the door is closed.

HIGH TEMPERATURE alarm:

- If the inside freezer temperature is higher than -8 °C then the "LED" display shows "ht" and give out alarm sound until any button is pressed or the temperature drops back below -8 °C.

IMPORTANT! The display always shows the setting temperature and not the actual one.

Note that; the ambient temperature, temperature of the freshly stored food and how often the door is opened, affects the temperature in the freezer compartment. If required, change the temperature setting.

Use

Freezing Fresh Foods

Proper use of the appliance, adequately packed food, correct temperature and taking into account hygienic precautions will substantially influence the quality of freezing the food or storing of the frozen foodstuffs.

- Carefully select food to be frozen: it should be of adequate quality and suitable for freezing. - Choose correct packaging for each kind of food and pack it correctly.

- The packaging should be air tight and well sealed without leaking since this could cause substantial vitamin loss and dehydration.

- Foils and bags should be soft enough to tightly wrap around the food.

• Mark packages with following data: kind and amount of foods and the date of loading.
• It is most important that the food is frozen as quickly as possible. We therefore recommend the size of the package not to be too large and to be cooled before loading into the freezer.
• The amount of the fresh foods that can be loaded in the freezer within 24 hours is stated on the rating plate. If the loaded amount is too large, the quality of freezing is reduced which affects the quality of frozen foods.

Freezing Procedure

Freezing compartment is used for freezing foodstuffs (see chapter "Description of the Appliance").

• If you want to freeze larger amount of fresh food, choose Super freezing MODE.
• Don't let the fresh packages touch the frozen ones.
• Some 24 hours after the last load, set the thermostat knob to the position for normal operation.
• There is no need to choose “Super freezing MODE” if you intend to freeze smaller amount of fresh foods.

Storing Frozen Foods

Packages of frozen foods are stored in baskets. If you remove the baskets, you can store frozen packages directly on the cooling shelves.

Storing Commercially Frozen Foods

The storage time and recommended temperature for storing commercially frozen foods is indicated on the packaging. For storing and use consider manufacturer's instruction. When shopping, be careful and choose only packages of foods which are adequately packed and provided with complete data and stored in freezers where the temperature is not higher than -18°C.

Do not buy packages of food wrapped with frost. This indicates that the package was thawed before at least once.

Take care that packages don't start to thaw. Temperature rise shortens the storage time of commercially frozen foods.

Approximate Storage Time of Frozen Foods

Food

Storage time (in months)

1

2

3

4

5

6

7

8

9

10

11

12

Vegetable

+

+

+

Fruit

+

+

+

Bread, pastries

+

Milk

+

Ready-made meals

+

Meat: Beef

+

+

+

Veal

+

+

+

Pork

+

+

+

Poultry

+

+

+

Game

+

+

+

Minced meat

+

Smoked sausages

+

Fish: lean fat

+

+

Offal

+

Defrosting of Frozen Food

Partially thawed or defrosted foods should be used as soon as possible. Cold air preserves the food but it does not destroy microorganisms which rapidly activate themselves after defrosting and make foods perishable.

Partial defrosting reduces the nutritional value of foods, especially of fruits, vegetables and ready-made meals.

Changing the Direction of Opening the Door

1. Remove the 2 screws on the back.
2. Carefully lift the top cover 5CM away from the freezer, pull out the wire connector, then remove the top cover away.
3. Remove the three screws, then remove the upper hinge that holds the door in place. Lift the door and place it on a padded surface to prevent it from scratching.
4. Remove the screws and bottom hinge, then remove adjustable feet.
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

1. Reinsert the bracket to the bottom hinge pin. then reinsert both adjustable feet.

2. Place the door back on. Ensure the door is aligned horizontally and vertically so that the seals are closed on all sides before finally screw tightening the top hinge.

3. Connect the wire connector to the display board, then put back the top cover.

4. Screw the 2 screws on the back

5. With the door closed, check that the door is aligned horizontally and vertically, the seals are closed on all sides before finally tightening the bottom hinge. Re-adjust the leveling of the feet as needed.

Maintenance and Cleaning

Freezer Defrosting

Frost and ice layer, depositing on the inner walls of the freezer should be defrosted when 3-5 mm thick.

• 24 hours before defrosting choose "Super freezing MODE" so that the food packages are well cooled. After that empty the freezer and take care that the packages don't start to thaw.
• Disconnect the appliance from the mains supply.
• Defrosting is accelerated if the door is left open.
• Avoid using defrosting sprays, as they may cause damage to the plastic parts and may be hazardous to health.

- Dry the inside of the compartment with a sponge or a clean cloth

Switch Off the Appliance When Not in Use

If you do not intend to use the appliance for a longer period of time, disconnect the power supply, empty the appliance, defrost it and clean it. Leave the door slightly open.

Cleaning the Appliance

Before cleaning the appliance disconnect the cable from the mains supply. Do not use abrasive cleaning agents. Be careful to remove any cleanser agent remaining after cleaning.

• Clean the exterior of the appliances with water and liquid detergent.
• Wash the interior with lukewarm water and some vinegar.

After you have cleaned the appliance, reconnect it to the mains supply and put the food packages back to their place.

Trouble Shooting Guide

During the service, you can come across some troubles that in most cases result from

improper handling of the appliance and can easy be eliminated.

Symptom	Solution
No power to the appliance	Check there is power at the socket.
	Check there is not a power cut by checking the household lights.
	Check the fuse has not blown.
The temperature in the freezer section is too high	Check the ambient temperature is within appliances operating limits of 16 C to 32 C. Relocate the appliance if necessary.
	Check the thermostat is turned to the correct Setting relative to ambient conditions.
The freezer door will not open	- Has door just been opened? If so leave for a few minutes to allow the air pressure to equalise.
The compressor runs continuously	Adjust the thermostat to give correct temperature control.
	Check that the door is closed.
	Large quantities of food have recently been placed in the cabinet / and or door is frequently opened.
	Check that air ventilation is not obstructed.
Excessive frost and ice has built up	Ensure the door is not left open.
	Check that nothing is preventing the door from closing.
	Is the door gasket intact and clean.
	Has advised periodic defrosting been carried out.
Noise	Refer to normal operating sounds.

when you open the door, warm air gets into the appliance and when it is cooling, the underpressure seals the door. After few minutes (1-3), the door can easily be opened.

Normal operating sounds

Cooling in refrigerating-freezing appliances is enabled by the cooling system with compressor, which produces noise. How noisy the appliance is depends on where it is placed, how it is used and how old the appliance is.

- During the operation of the compressor the noise of liquid is heard and when the compressor is not operating, the refrigerant flow is heard. This is a normal condition and it has no influence whatsoever on the lifetime of the appliance.

- After starting the appliance, the operation of the compressor and the refrigerant flow may be louder, which does not mean that something is wrong with the appliance and it has no influence on the lifetime of the appliance. Gradually the noise is reduced.

- Sometimes unusual and stronger noise is heard, which is rather unusual for the appliance. This noise is often a consequence of inadequate placing. (The appliance shall be placed and leveled firmly on solid base and it should not touch the wall or kitchen units standing next to it.

WE RESERVE THE RIGHT TO ALTER THE SPECIFICATIONS WITH NO INFLUENCE ON THE OPERATION OF THE APPLIANCE.

Congelator vertical RO

Conectarea la priză

D	E	F	G	H	I
660mm	1080mm	80mm	50mm	135°-145°	900mm

Montarea mânerului

Priklop na električno omrežje

D	E	F	G	H	I
660 mm	1080 mm	80 mm	50 mm	135° - 145°	900 mm

Namestitev ročaja

1. Snemite pokrove vijakov z vrat.

Opis Aparata

1. Ponovno vstavite nosilec na zatič spodnjega tečaja, nato pa ponovno vstavite še obe nožici.

2. Ponovno namestite vrata. Preden dokončno privijete zgornji tečaj, preverite, će so vrata poravnana v vodoravni in navpični smeri ter će se vsa tesnila tesno prilegajo na vseh stranicah.

3. Priključite konektor na prikazovalnik in ponovno namestite zgornji pokrov.

4. Privijte dva vijaka na hrbtni strani.

5. Ko so vrata zaprta, preverite, će so poravnana v vodoravni in navpični smeri ter će se vsa tesnila tesno prilegajo na vseh stranicah. Nato privijte spodnji tečaj. Po potrebi nastavite višino nožic.

- Posušite notranjost zamrzovalnega dela z gobo in čisto krpo.

Izklopite aparat, ko ga ne uporabljate.

Opis aparata

1. Kućište aparata
2. Fijoke za zamrzavanje
3. Kompresor (pozadi kućišta)
4. Regulacione nožice
5. Radni pult
6. Elektronska kontrolna tabla
7. Zaptivač vrata
8. Komplet vrata

Rukovanje aparatom

1. Pričvrstite konzolu na klin donjeg šarnira, zatim ponovno montirajte obe regulacione nožice.

1. Vratite vrata nazad. Proverite dali su vrata pravilno poravnana u horizontalnom i vertikalnom smislu, tako da zaptivači prianjaju duž celog okvira. Nakon toga prišrafite i pričvrstite gornji šarnir.

1. Vodiče elektronskih spojeva spojite nazad na kontrolnu tablu i vratite gornji poklopac.

1. Prišrafite dva šrafa pozadi aparata.

1. Sa vratima u zatvorenom položaju proverite horizontalan i vertikalan položaj vrata, proverite dali zaptivači pravilno zatvaraju otvore na svim stranama, i konačno prišrafite donji šarnir. Podesite položaj i balans regulacionih nožica po potrebi.

- Unutrašnjost aparata obrišite sunderom ili čistom krpom.

Čišćenje aparata

Pre čišćenja prekinite dovod električne energije u aparat.

Za čišćenje ne smete koristiti gruba i agresivna sredstva za čišćenje, jer možete oštetiti površinu. Nakon čišćenja pazite da odstranite sve ostatke sredstva za čišćenje.

• Spoljašnji deo aparata čistite vodom i deterdžentom.
• Unutrašnjost aparata operite mlakom vodom, kojoj ste dodali nešto vinskog sirćeta.

Nakon čišćenja ponovo priključite aparat na električnu mrežu i vratite hranu nazad.

Isključenje aparata kada ga ne koristite

Ukoliko aparat ne nameravate koristiti duže vreme, isključite ga iz električne mreže, izvadite iz njega hranu i očistite ga. Vrata ostavite pritvorena.

⑦ Uputstva za otklanjanje smetnji

U toku upotrebe aparata može doći do smetnji u radu koje su u većini slučajeva posledica nepravilne upotrebe, te ih možete pokušati otkloniti sami.

Pojava	Rješenje
Aparat ne radi nakon priključenja na električnu instalaciju.	Proverite dovod napona u utičnicu.Proverite dali je došlo do nestanka struje (upalite neku sijalicu).Proverite dali je pregoreo osigurač.
Temperatura u zamrzivaču je previsoka.	Proverite sobnu temperaturu u prostoriji, u kojoj je smešten aparat – raspon mora biti između + 16°C i + 32°C.Po potrebi premestite aparat.Proverite dali je termostat pravilno regulisan obzirom na temperaturne uslove okoline.
Vrata zamrzivača ne mogu da se otvore.	Dali ste tik pre toga otvarali vrata? U tom slučaju pričekajte nekoliko momenata da se izjednači vazdušni tlak.
Kompresor radi neprekidno.	Dugme termostata pomerite na pravilnu vrednost.Proverite dali su vrata zatvorena.Nedavno ste u unutrašnjost složili veću količinu hrane, ili ste često otvarali vrata.Pobrinite se za neometano kruženje vazduha.
Izrazito akumulisanje inja i leda.	Proverite dali su vrata ostala otvorena.Pobrinite se da zatvaranje vrata bude nesmetano.Proverite dali je zaptivač na vratima posve čist i neoštećen.Preporučujemo da aparat povremeno odmrznete.
Šumovi	Više o tome u poglavlju o uobičajenim zvukovima i šumovima tokom rada aparata.

Vrata zamrzivača se teško otvaraju