CBR250RA (2010) - Rollerblades Honda - Free user manual and instructions
Find the device manual for free CBR250RA (2010) Honda in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motorcycle |
| Brand | Honda |
| Model | CBR250RA (2010) |
| Year | 2010 |
| Engine Type | 249cc liquid-cooled single-cylinder |
| Power Output | 26 hp (19 kW) @ 8,500 rpm |
| Fuel System | PGM-FI electronic fuel injection |
| Transmission | 6-speed manual |
| Overall Length | 2,035 mm (80.1 in) |
| Overall Width | 715 mm (28.1 in) |
| Overall Height | 1,115 mm (43.9 in) |
| Wheelbase | 1,370 mm (53.9 in) |
| Seat Height | 780 mm (30.7 in) |
| Curb Weight | 165 kg (364 lb) |
| Fuel Capacity | 13 L (3.4 US gal) |
| Front Brake | Single 296 mm disc with ABS |
| Rear Brake | Single 220 mm disc with ABS |
| Front Tire | 110/70-17 |
| Rear Tire | 140/70-17 |
| Battery | 12V 8.6 Ah (YTX9-BS) |
| Oil Capacity | 2.7 L (2.9 US qt) with filter |
| Maintenance Interval | Every 6,000 km or 1 year |
| Safety Features | ABS brakes, hazard lights, side stand switch |
Frequently Asked Questions - CBR250RA (2010) Honda
What type of oil should I use for my Honda CBR250RA (2010)?
Use 10W-30 or 10W-40 motorcycle oil that meets API SG or higher. Always check the manual for exact specifications.
How do I adjust the chain tension on my CBR250RA?
Loosen the rear axle nut, then turn the adjuster bolts on each side of the swingarm to achieve 25-35 mm of slack at the midpoint of the lower chain run. Retighten the axle nut to 59 N·m.
What is the recommended tire pressure for the CBR250RA?
Front: 29 psi (200 kPa); Rear: 33 psi (228 kPa) for solo riding. Adjust as per load conditions.
How do I reset the maintenance light on a 2010 CBR250RA?
Turn the ignition ON, then press and hold the MODE button for 2 seconds. When the oil change icon flashes, press and hold SELECT for 2 seconds to reset.
What is the correct spark plug gap for the CBR250RA?
Use NGK CR8EH-9 or equivalent with a gap of 0.8-0.9 mm.
How often should I change the brake fluid?
Change the brake fluid every 2 years or 24,000 km. Use DOT 4 fluid from a sealed container.
What is the fuel recommendation for the CBR250RA?
Use unleaded gasoline with a minimum octane rating of 91 RON (research octane number). Avoid ethanol blends above E10.
How do I check and add coolant?
With the engine cold, check the coolant level in the reservoir. It should be between the LOW and FULL marks. Add a 50/50 mix of Honda coolant and distilled water if low.
What is the torque spec for the oil drain bolt?
Tighten the oil drain bolt to 22 N·m (2.2 kgf·m). Always replace the crush washer.
Where can I find the VIN on my CBR250RA?
The VIN is stamped on the right side of the steering head and also on the frame near the engine. Check your registration document for the number.
User questions about CBR250RA (2010) Honda
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Rollerblades in PDF format for free! Find your manual CBR250RA (2010) - Honda and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CBR250RA (2010) by Honda.