Metropolitan (2026) - Motorcycle Honda - Free user manual and instructions
Find the device manual for free Metropolitan (2026) Honda in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motorcycle (Scooter) |
| Brand | Honda |
| Model | Metropolitan (2026) |
| Engine Type | 4-stroke, single cylinder, OHC |
| Displacement | 49.5 cc |
| Fuel System | Fuel injection (PGM-FI) |
| Fuel Capacity | 5.2 liters (1.37 US gal) |
| Starting System | Electric start |
| Transmission | Automatic CVT |
| Front Brake | Single disc with hydraulic caliper |
| Rear Brake | Drum brake |
| Front Tire | 90/90-10 |
| Rear Tire | 90/90-10 |
| Dimensions (L x W x H) | 1810 mm x 685 mm x 1050 mm (71.3 x 27.0 x 41.3 in) |
| Seat Height | 754 mm (29.7 in) |
| Curb Weight (including oil and fuel) | 90 kg (198 lb) |
| Maximum Load | 150 kg (330 lb) |
| Fuel Consumption (WMTC mode) | 2.0 L/100 km (118 mpg US) |
| Battery Type | 12V-4Ah (maintenance-free) |
| Headlight | 12V 35/35W halogen |
| Tail Light | LED |
| Maintenance Interval | Every 4,000 km (2,500 mi) or 6 months |
| Cleaning Recommendation | Mild soap and water; avoid pressure washers |
| Spare Parts Availability | Authorized Honda dealers and online retailers |
| Repairability | Moderate; professional service recommended for major repairs |
Frequently Asked Questions - Metropolitan (2026) Honda
What type of fuel should I use for the Honda Metropolitan 2026?
Use unleaded gasoline with a minimum octane rating of 91 (RON). Premium fuel is recommended for optimal performance.
How often should I change the engine oil?
Change the engine oil every 4,000 km (2,500 mi) or 6 months, whichever comes first. Use SAE 10W-30 grade oil that meets API SG or higher.
What is the recommended tire pressure?
Front tire: 1.75 bar (25 psi). Rear tire: 2.0 bar (29 psi). Check when tires are cold.
How do I adjust the idle speed?
The Metropolitan has an electronically controlled fuel injection system and does not require manual idle adjustment. If the idle is irregular, consult a dealer.
What is the break-in period?
For the first 800 km (500 mi), avoid full throttle and vary engine speed. Do not exceed 2/3 of maximum speed.
How do I check the drive belt condition?
Inspect the drive belt every 8,000 km (5,000 mi) for cracks or wear. Replacement is recommended at 16,000 km (10,000 mi).
What type of coolant should I use?
Use a 50/50 mixture of ethylene glycol-based antifreeze and distilled water. The Metropolitan is air-cooled, but the final drive case may contain coolant. Refer to manual.
How do I replace the headlight bulb?
Remove the front cover screws, disconnect the headlight wire connector, and replace the 12V 35/35W halogen bulb. Avoid touching the glass with bare hands.
What is the storage capacity under the seat?
The under-seat compartment can hold a full-face helmet or a small bag. Maximum load capacity is 3 kg (6.6 lb).
How do I clean the spark arrestor?
Clean the spark arrestor every 1,000 km (600 mi). Remove the two bolts, tap the arrester to remove carbon deposits, and reinstall. Wear gloves.
User questions about Metropolitan (2026) Honda
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motorcycle in PDF format for free! Find your manual Metropolitan (2026) - Honda and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Metropolitan (2026) by Honda.