V1 Viper i - Smartphone Allview - Free user manual and instructions
Find the device manual for free V1 Viper i Allview in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smartphone |
| Brand | Allview |
| Model | V1 Viper i |
| Display Size | 5.0 inches |
| Display Resolution | 720 x 1280 pixels |
| Processor | Quad-core 1.3 GHz |
| RAM | 1 GB |
| Internal Storage | 8 GB |
| Rear Camera | 8 MP |
| Front Camera | 2 MP |
| Battery Capacity | 2500 mAh |
| Operating System | Android 6.0 Marshmallow |
| Dimensions (H x W x D) | 145 x 70 x 8 mm |
| Weight | 150 g |
| Connectivity | Wi-Fi 802.11 b/g/n, Bluetooth 4.0, GPS, 4G LTE |
| Sensors | Accelerometer, Proximity |
| SIM | Dual SIM (Micro-SIM) |
| Expandable Storage | microSD up to 32 GB |
| Maintenance | Clean with soft dry cloth; avoid liquids and solvents |
| Safety | Use only certified charger; avoid extreme temperatures |
| Spare Parts & Repairability | Battery and screen replaceable by authorized service center |
Frequently Asked Questions - V1 Viper i Allview
What is the battery life of the Allview V1 Viper i?
The battery life depends on usage. With a 2500 mAh battery, you can expect up to 12 hours of talk time and up to 300 hours on standby. Heavy usage (gaming, video streaming) will reduce battery life significantly.
Can I replace the screen myself?
Screen replacement is possible but requires careful disassembly. We recommend taking the device to an authorized service center to avoid damaging other components.
Does the phone support software updates?
The Allview V1 Viper i runs Android 6.0 Marshmallow. Official updates may not be available. However, you can check for OTA updates in Settings > About phone > System updates.
How good is the camera quality?
The rear 8 MP camera takes decent photos in good lighting. The front 2 MP camera is suitable for basic selfies and video calls. For better results, use HDR mode in bright conditions.
Can I expand the storage?
Yes, the device supports microSD cards up to 32 GB. Insert the card into the dedicated slot (accessible by removing the back cover).
Is it a dual SIM phone?
Yes, the Allview V1 Viper i supports dual SIM (Micro-SIM). You can use two networks simultaneously. SIM management is available in Settings > SIM cards.
How do I perform a factory reset?
Go to Settings > Backup & reset > Factory data reset. Alternatively, press and hold Volume Up + Power buttons to enter recovery mode, then select 'wipe data/factory reset'.
Does it have 4G connectivity?
Yes, the phone supports 4G LTE networks. Ensure you have a compatible SIM and that LTE is enabled in Settings > Mobile networks.
Is the phone water resistant?
No, the Allview V1 Viper i does not have any IP rating for water or dust resistance. Avoid exposing it to moisture or water.
What should I do if the phone becomes slow?
Try clearing cache, uninstalling unused apps, or performing a factory reset. If the issue persists, consider upgrading to a device with more RAM.
User questions about V1 Viper i Allview
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Smartphone in PDF format for free! Find your manual V1 Viper i - Allview and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. V1 Viper i by Allview.