FM100 - Barcode Reader Newland - Free user manual and instructions
Find the device manual for free FM100 Newland in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Newland |
| Model | FM100 |
| Product Type | Wearable Ring Barcode Scanner |
| Weight | Approx. 50 g (1.8 oz) |
| Dimensions (W x H x D) | 40 x 27 x 22 mm (1.6 x 1.1 x 0.9 in) |
| Power Source | Rechargeable Li-ion battery, 500 mAh |
| Interface | Bluetooth 5.0, USB-C |
| Scan Engine | Newland 2D imager |
| Scan Speed | Up to 100 scans per second |
| Scan Range | 0 – 500 mm (0 – 20 in) |
| Supported Barcodes | 1D and 2D codes (QR, PDF417, Data Matrix, etc.) |
| LED Indicator | Red/Green/Blue status LED |
| Housing Material | ABS plastic with rubber grip |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Humidity | 5% – 95% non-condensing |
| Drop Resistance | 1.5 m (5 ft) onto concrete |
| IP Rating | IP54 |
| Cable Length (Charging) | 1 m (3.3 ft) USB-C cable |
| Warranty | 1 year limited |
| Included Accessories | Charging cable, finger strap, quick start guide |
| Maintenance | Clean with dry, lint-free cloth; avoid solvents |
| Safety Certifications | CE, FCC, RoHS |
Frequently Asked Questions - FM100 Newland
How do I pair the FM100 with my device via Bluetooth?
Ensure the scanner is charged. Press the Bluetooth button until the LED flashes blue. On your device, search for 'FM100' in Bluetooth settings and select it. The LED will turn solid blue when connected.
What barcodes can the FM100 read?
The FM100 reads both 1D (UPC, EAN, Code 128, etc.) and 2D barcodes (QR Codes, Data Matrix, PDF417, etc.).
How long does the battery last?
The battery lasts up to 8 hours of continuous scanning or up to 3 days on standby. Charging takes about 2 hours via USB-C.
How do I clean the scanner?
Use a soft, dry lint-free cloth to wipe the exterior. Do not use liquids or solvents. For the scan window, gently blow off dust or use a lens cleaning cloth.
My scanner is not turning on. What should I do?
Charge the device for at least 30 minutes using the included USB-C cable. Press and hold the power button for 5 seconds. If still not on, try a different USB charger.
Can I use the scanner while charging?
Yes, the FM100 supports pass-through operation, so you can scan while connected to a USB power source.
How do I reset the FM100 to factory settings?
Press and hold the Bluetooth button and the power button simultaneously for 10 seconds until the LED flashes red three times. This resets all settings.
What is the maximum scan distance?
The FM100 can scan barcodes up to 500 mm (20 inches) away depending on barcode size and density.
Is the FM100 water resistant?
It has an IP54 rating, meaning it is protected against dust and splashing water. Do not submerge it in water.
Does the FM100 work with iOS and Android?
Yes, it is compatible with iOS, Android, and Windows devices via Bluetooth HID or SPP profile. No special app required for basic scanning.
User questions about FM100 Newland
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual FM100 - Newland and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FM100 by Newland.