USB 2.0 Multi-Frontpanel 3.5 - Memory reader Equip - Free user manual and instructions

Product Type	Memory Card Reader (3.5-inch bay)
Brand	Equip
Model	USB 2.0 Multi-Frontpanel 3.5
Interface	USB 2.0
Supported Card Types	SD, SDHC, SDXC, microSD, microSDHC, microSDXC, MMC, CF, MS, MS Pro, xD
Dimensions (W x H x D)	Approx. 145 x 42 x 20 mm (5.7 x 1.7 x 0.8 inches)
Weight	Approx. 150 g (5.3 oz)
Power Source	USB bus-powered (no external power required)
Operating System Compatibility	Windows XP/Vista/7/8/10/11, Linux, Mac OS 9.x and later
Plug and Play	Yes (no driver installation required for most OS)
Number of Card Slots	Typically 7-in-1 or more (individual slots)
Front Panel Material	Plastic or metal (model dependent)
Installation	Fits standard 3.5-inch drive bay (internal, panel mount)
Cable Length	Internal USB cable, approx. 30 cm
Supported File Systems	FAT16, FAT32, exFAT, NTFS (read)
Data Transfer Rate	Up to 480 Mbps (USB 2.0)
LED Indicator	Yes (power/activity)
Maintenance	Clean with a soft, dry cloth. Do not use liquids or solvents.
Safety	Keep away from water, extreme temperatures, and magnetic fields.
Spare Parts & Repairability	No user-serviceable parts. Contact manufacturer for replacement.

Frequently Asked Questions - USB 2.0 Multi-Frontpanel 3.5 Equip

What memory card formats are supported by the Equip USB 2.0 Multi-Frontpanel 3.5?

The reader supports a wide range of formats including SD, SDHC, SDXC, microSD, microSDHC, microSDXC, MMC, CompactFlash (CF), Memory Stick (MS), MS Pro, and xD-Picture Card.

Is the reader compatible with USB 3.0 ports?

Yes, it is backward compatible with USB 3.0 ports, but it will operate at USB 2.0 speeds (up to 480 Mbps).

Do I need to install drivers for this device?

For most modern operating systems, no drivers are required. It is plug-and-play. However, some older systems may need drivers, which can be found on the manufacturer's website.

Can I use this reader with Linux or Mac?

Yes, it is compatible with Linux (kernel 2.6+) and Mac OS 9.x and later. No additional software is usually needed.

How do I install the reader into my computer?

The device fits into a standard 3.5-inch drive bay. Connect the internal USB cable to a USB header on your motherboard, mount the panel in the bay, and secure it with screws. Then connect the external USB cable to a USB port on the back of your PC.

What is the maximum card capacity supported?

The reader supports cards up to 2TB in capacity, depending on the card type. For example, SDXC cards up to 2TB, microSDXC similarly.

Why is my card not being detected?

Check if the card is inserted correctly. Try another card to rule out a faulty card. Ensure the USB cable is securely connected. If using an older OS, try installing the driver. Also, verify that the card is not locked (physical switch on SD cards).

Can I use multiple cards simultaneously?

Yes, the reader has multiple slots. However, only one card can be accessed at a time per slot. The operating system will assign separate drive letters.

Is there an LED indicator to show activity?

Yes, there is a LED that lights up when power is connected and blinks during data transfer.

How should I clean and maintain the reader?

Use a soft, dry cloth to clean the exterior. Do not use water, cleaning solvents, or abrasive materials. Avoid inserting cards forcefully.

USER MANUAL USB 2.0 Multi-Frontpanel 3.5 Equip

Internal view of an electronic device chassis showing CPU, RAM, and network ports (no readable text or symbols)

3.5" Multi Front Panel + Cardreader 50plus

english

Important Note:

We suggest that you read the following steps carefully in advance in order to fully understand the installation method of this equipment for obtaining maximum efficiency.

Package Contents

1. 3.5" Multi Front Panel
2. Setup CD
3. Slot bracket
4. Octopus cable for FireWire, USB and SATA connection
5. SATA connection cable
6. Y-cable with 2x audio plug
7. USB connection cable
8. Set of screws

Driver and Hardware Installation

For Windows Vista/XP/2000/ME system, drivers are all provided by the operating systems, no additional driver needed. The card reader will be recognized by OS automatically once it is connected.

Driver Installation for Windows 98

Follow the installation guide below to complete the driver installation.

1. Insert Setup CD, and double click "AM-Reader-98Drv-Setup"
2. Click "Next" on the welcome page of "InstallShield Wizard"
3. Click "finish" to complete the installation

You will see four removable disk icons of the all-in-1 card reader on the explorer window once you connect your card reader to the PC. The disk drive letters are determined by the PC's configuration which may varies.

Note: The driver installation above is designed for Windows 98 only.

Driver Installation for Mac OS 9.x

1. Decompress driver binary file in your CD, it will create two driver files in specific directory.
2. Copy these two files into Mac OS 9.x system extension directory.
3. Reboot your system.
4. Plug your card reader on USB, and use it.

Hardware Installation

Please connect the cables to the panel body as shown in picture 1.

There are three cables need to be connected to the panel body.

The white 4-pin connector on the left should connect with the 4-pin connector of the USB connection cable (1) attention: this connector has been particularly designed and can be connected only in the proper way).

The 16-pin connector in the middle should connect with the 16-pin connector of the Octopus cable for FireWire, USB and SATA connection (1) attention: the side with a key should be connected upwards, as shown in the picture 2).

The left 5-pin connector should connect with the 5-pin connector of the Y-cable with 2x audio plug (1) attention: this connector has been particularly designed and can be connected only in the proper way).

The red SATA cable is already fixed on the panel body.

Fixing the Panel Body:

Now the wire connection of the whole set is completed, slide the extension cables and the panel body into any open external 3.5" disk driver slot, and use the enclosed screws to fasten it.

Connect extension ports to the correspondent ports.

1. Connect the USB, FireWire1394a and audio extension ports as shown in picture 3 (audio extension ports should connect to the audio-in ports (MIC & SPK) located on the back side according to their colors)

Interior view of an electronic device showing a green circuit board with internal components and red cables (no visible text or symbols)

Picture 1

Close-up of electronic circuit boards with visible traces and connectors (no readable text or symbols)

Picture 2

Close-up of a computer interface showing a hand inserting a white cable into a socket with network cables (no visible text or symbols)

Picture 3

1. Connect the two SATA connectors to the correspondent ports on the motherboard as shown in picture 4 (1) attention: these connectors have been particularly designed and can be connected only in the proper way).

Finish hardware installation:

Please check that all cables/connections are fixed properly and turn on the computer, the power LED of the front panel shall be on.

Close-up of a computer motherboard with a hand adjusting a component (no visible text or symbols)

Picture 4