IGP-0432 - Switch Equip - Free user manual and instructions
Find the device manual for free IGP-0432 Equip in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switch |
| Brand | Equip |
| Model | IGP-0432 |
| Ports | 5x Gigabit Ethernet (10/100/1000 Mbps) |
| Network Standards | IEEE 802.3, 802.3u, 802.3ab, 802.3x |
| Switching Capacity | 10 Gbps |
| MAC Address Table | 2K entries |
| Packet Forwarding Rate | 7.44 Mpps |
| Flow Control | IEEE 802.3x full-duplex |
| LED Indicators | Power, Link/Activity per port |
| Power Supply | External 5V DC adapter |
| Power Consumption | 2.5W max |
| Dimensions (W x D x H) | 100 x 75 x 25 mm |
| Weight | 120 g |
| Housing Material | Metal |
| Mounting | Desktop / Wall-mountable |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Compliance | CE, FCC, RoHS |
| Warranty | 2 years |
| Included Accessories | Switch, power adapter, user manual |
Frequently Asked Questions - IGP-0432 Equip
How do I connect the Equip IGP-0432 switch?
Connect the power adapter to the switch and a power outlet. Use Ethernet cables to connect your devices (computers, routers, etc.) to any of the 5 Gigabit ports. The switch will automatically negotiate speed and duplex.
Does the IGP-0432 support PoE (Power over Ethernet)?
No, this model is a non-PoE switch. It only provides data connectivity; devices requiring power must use their own power sources.
What is the maximum data transfer speed?
Each port supports up to 1000 Mbps (1 Gbps) in full-duplex mode, providing high-speed connections for bandwidth-intensive applications.
How can I reset the switch to factory settings?
There is no reset button on this switch. It is an unmanaged switch that operates plug-and-play. Power cycling the device will clear any temporary errors.
Can I mount the switch on a wall?
Yes, the switch has mounting holes on the bottom. Use appropriate screws and anchors to mount it securely on a wall or under a desk.
What should I do if the LED lights are not working?
Check that the power adapter is firmly connected and the outlet is working. If the power LED is off, try a different outlet. If still off, the device may be defective.
Is the IGP-0432 compatible with gigabit internet?
Yes, this switch supports 10/100/1000 Mbps speeds, making it fully compatible with gigabit internet connections.
How many devices can I connect?
You can connect up to 5 devices directly using Ethernet cables. For more devices, cascade multiple switches.
Does this switch require configuration?
No configuration is needed. It is plug-and-play and automatically detects connected devices.
What is the power consumption in standby?
The switch consumes less than 1W when idle and up to 2.5W under full load.
User questions about IGP-0432 Equip
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual IGP-0432 - Equip and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IGP-0432 by Equip.
USER MANUAL IGP-0432 Equip
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Equip
Model : IGP-0432
Category : Switch