WAP-1001 - Access Point LEVELONE - Free user manual and instructions
Find the device manual for free WAP-1001 LEVELONE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | LevelOne |
| Model | WAP-1001 |
| Wireless Standards | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | Up to 300 Mbps |
| Antennas | 2 External Omni-directional (2 dBi) |
| Ports | 1x 10/100 Ethernet (RJ-45) |
| Power Supply | Power over Ethernet (802.3af) or DC 12V / 1A |
| Power Consumption | Maximum 5W |
| Dimensions (W x D x H) | 150 x 100 x 30 mm |
| Weight | 200 g |
| Encryption | WEP, WPA, WPA2 (TKIP/AES) |
| Management | Web-based GUI (HTTP) |
| Security | MAC Address Filtering, SSID Broadcast Disable, Radio On/Off Schedule |
| Mounting | Wall or Ceiling mountable (bracket included) |
| Operating Temperature | 0°C to 40°C |
| LED Indicators | Power, LAN, WLAN |
| Package Contents | Access Point, Power Adapter, Ethernet Cable, Mounting Kit, Quick Installation Guide |
| Certifications | CE, FCC |
| Maintenance | Clean with a soft, dry cloth; avoid liquids |
| Spare Parts and Repairability | Not user-serviceable; contact LevelOne support for repairs |
Frequently Asked Questions - WAP-1001 LEVELONE
How do I reset the LevelOne WAP-1001 to factory defaults?
Press and hold the Reset button on the device for about 10 seconds until the power LED blinks. The device will reboot with factory settings.
What is the default IP address of the WAP-1001?
The default IP address is 192.168.0.50. Access the web interface by entering this IP in your browser. Default username and password are both admin.
Does the WAP-1001 support Power over Ethernet (PoE)?
Yes, it supports IEEE 802.3af PoE. You can power it through the Ethernet port using a PoE switch or injector.
How many devices can connect to the WAP-1001 simultaneously?
Typically, it can support up to 30-50 simultaneous connections depending on network traffic and environment.
What wireless security protocols are available?
It supports WEP, WPA, and WPA2 with TKIP or AES encryption. WPA2-AES is recommended for best security.
Can I use the WAP-1001 as a wireless repeater?
Yes, the device supports repeater mode. Configure it in the web interface under 'Wireless Mode' to extend the range of an existing network.
How do I mount the access point on a wall or ceiling?
Use the included mounting bracket. Attach the bracket to the wall or ceiling with screws, then slide the access point onto the bracket until it clicks into place.
What is the maximum wireless range of the WAP-1001?
Indoor range is approximately 50 meters (164 feet) and outdoor up to 150 meters (492 feet) under ideal conditions. Actual range may vary.
How do I update the firmware on the WAP-1001?
Download the latest firmware from LevelOne's website. Log into the web interface, go to System Tools > Firmware Upgrade, select the file and click Upgrade. Do not power off during the process.
What are the LED indicators on the WAP-1001?
The device has three LEDs: Power (green), LAN (green/amber for speed), and WLAN (blinking indicates activity).
User questions about WAP-1001 LEVELONE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual WAP-1001 - LEVELONE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WAP-1001 by LEVELONE.