WAP-6150 - Access Point LEVELONE - Free user manual and instructions
Find the device manual for free WAP-6150 LEVELONE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Model | WAP-6150 |
| Brand | LevelOne |
| Frequency Band | 2.4 GHz and 5 GHz |
| Wireless Standard | IEEE 802.11a/b/g/n |
| Data Rate | Up to 300 Mbps (2.4 GHz) + 300 Mbps (5 GHz) |
| PoE Support | Yes (802.3af) |
| Power Supply | 12V DC, 1A |
| Dimensions (W x D x H) | 160 x 110 x 30 mm |
| Weight | 200 g |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Antenna | Internal dual-band antennas |
| Security | WEP, WPA, WPA2, WPA3 |
| Management | Web interface, SNMP |
| LED Indicators | Power, LAN, WLAN, PoE |
| Mounting | Wall or ceiling mountable |
| Certifications | CE, FCC |
| Maintenance | Clean with a dry cloth; do not use liquids |
| Safety | Use only the supplied power adapter |
| Spare Parts / Repairability | No user-serviceable parts; contact LevelOne support |
| General Information | Designed for indoor use; provides reliable wireless coverage |
Frequently Asked Questions - WAP-6150 LEVELONE
How do I set up the LevelOne WAP-6150?
Connect the access point to your router via Ethernet cable, then power it on. Access the web interface by entering the default IP address (192.168.1.1) in your browser. Log in with default credentials (admin/admin) and follow the setup wizard.
How do I reset the WAP-6150 to factory defaults?
Use a paperclip to press and hold the reset button on the back of the device for about 10 seconds until the LEDs flash. The device will reboot with factory settings.
Does this access point support Power over Ethernet (PoE)?
Yes, the WAP-6150 supports IEEE 802.3af PoE, allowing power and data transmission over a single Ethernet cable. You will need a PoE switch or injector.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1. The default username and password are both 'admin' (lowercase). Change these after initial setup for security.
Can I use the WAP-6150 as a standalone access point?
Yes, it can be used as a standalone access point connected to any router or switch via Ethernet. It does not require a separate controller.
How do I update the firmware?
Download the latest firmware from the LevelOne support website. Log into the web interface, go to System Tools > Firmware Upgrade, choose the file, and click Upgrade. Do not power off during the process.
What security modes are supported?
The WAP-6150 supports WEP, WPA, WPA2, and WPA3 encryption. For maximum security, use WPA2 or WPA3 with AES.
How can I set up a guest network?
In the web interface, go to Wireless > Guest Network. Enable it and configure a separate SSID and password. Guest traffic is isolated from your main network.
What is the maximum range of this access point?
Indoor range is typically up to 100 meters (328 feet) depending on obstacles and interference. For best performance, place it centrally and avoid thick walls.
How do I troubleshoot connectivity issues?
Check that the device has power and the Ethernet cable is securely connected. Ensure your router is providing DHCP. Try rebooting the access point and your router. Verify that the SSID is visible and the correct password is entered.
User questions about WAP-6150 LEVELONE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual WAP-6150 - LEVELONE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WAP-6150 by LEVELONE.