Control 1 - Loudspeaker Omnitronic - Free user manual and instructions

Product Type	Passive Speaker
Brand	Omnitronic
Model	Control 1
Dimensions (approx.)	200 x 150 x 150 mm
Weight (approx.)	2 kg
Impedance	8 ohms
Power Handling (RMS)	50 W
Peak Power	100 W
Frequency Response	80 Hz – 20 kHz
Sensitivity	90 dB
Driver Configuration	1 x 5" woofer, 1 x 1" tweeter
Enclosure Type	Bass reflex
Input Connector	Binding posts
Grille	Detachable
Mounting Options	Wall mount bracket (optional)
Color	Black
Material	MDF cabinet, vinyl finish
Protection	Overload protection (fuse)
Intended Use	Studio monitoring, PA, hi-fi
Cleaning	Wipe with dry cloth, avoid liquids
Safety	Do not expose to moisture, use with stable amplifier

Frequently Asked Questions - Control 1 Omnitronic

How do I connect the Omnitronic Control 1 speaker?

Connect the speaker to an amplifier using standard speaker cables. Ensure the amplifier is turned off during connection. Use the binding posts on the back of the speaker. Match polarity (+ to +, - to -).

What amplifier power is recommended for the Control 1?

An amplifier with 30-100W RMS per channel is suitable. Avoid overdriving the speaker as it may cause damage. The speaker's impedance is 8 ohms.

Can I use the Control 1 as a studio monitor?

Yes, the Control 1 is designed for accurate sound reproduction, making it suitable for nearfield monitoring in home studios. Place them on stands or desktops at ear level.

How should I clean and maintain the speaker?

Use a soft, dry cloth to wipe the cabinet. Do not use water or cleaning solvents as they may damage the finish. For the grille, gently vacuum with a brush attachment if needed.

Can I mount the speakers on walls?

Yes, the Control 1 has keyhole slots for wall mounting. Use appropriate screws and wall anchors. Alternatively, use optional Omnitronic wall mount brackets for secure installation.

What is the frequency response of the Control 1?

The frequency response is approximately 80 Hz to 20 kHz, providing clear highs and adequate bass for its size. For deeper bass, consider adding a subwoofer.

Is the Control 1 a passive or active speaker?

It is a passive speaker, meaning it requires an external amplifier. It does not have built-in amplification.

What are the dimensions and weight?

The approximate dimensions are 200 x 150 x 150 mm (W x H x D) and weight is about 2 kg per speaker. These are estimates; refer to the manual for exact figures.

Can I use the Control 1 outdoors?

The Control 1 is designed for indoor use. Avoid exposure to rain, moisture, extreme temperatures, and direct sunlight as it may damage the speaker.

How do I install the speaker properly?

Place the speaker on a stable surface or mount it securely. Ensure proper ventilation around the cabinet. Keep away from heat sources. Connect with high-quality speaker cables and ensure amplifier power matches the speaker's rating.

USER MANUAL Control 1 Omnitronic

4.1 Setting up and mounting 12
4.2 Attachment to the wall via the optional wall holder 13
4.3 Incorrect methods of installation 13
4.4 Making the connections 14
4.5 Information on speaker cables.... 14

1. OPERATION 14

2. CLEANING AND MAINTENANCE 15

3. TECHNICAL SPECIFICATIONS.... 15

7.1 Accessories.... 16

This user manual is valid for the article numbers:

11229606, 11229608, 11229610, 11229615

Passive Speaker System

CAUTION!

Keep this device away from rain and moisture! Unplug mains lead before opening the housing!

For your own safety, please read this user manual carefully before you initially start-up.

Every person involved with the installation, operation and maintenance of this device has to

• be qualified
• follow the instructions of this manual
• consider this manual to be part of the total product
• keep this manual for the entire service life of the product
• pass this manual on to every further owner or user of the product
• download the latest version of the user manual from the Internet

1. INTRODUCTION

Thank you for having chosen an OMNITRONIC speaker system. If you follow the instructions given in this manual, we are sure that you will enjoy this device for a long period of time.

Unpack your speaker system.

2. SAFETY INSTRUCTIONS

This speaker system has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems.

Please make sure that there are no obvious transport damages. Should you notice any damages on the connection panel or on the casing, do not take the speaker system into operation and immediately consult your local dealer.

DANGER OF BURNING!

The materials used in this speaker system are normally flammable. If B1 is required at the installation place, the surface must be treated with an appropriate fire retardant in regular intervals.

DANGER TO LIFE!

A crashing speaker system can cause deadly accidents. All safety instructions given in this manual must be observed.

Please note that speaker systems could move due to bass-beats and vibrations. Furthermore, unintended pushes from DJs, musicians or the audience present further risk. This is why the speaker system must always be secured against moving or the respective area has to be blocked.

Before the speaker system is switched on all faders and volume controls have to be set to zero or minimum position.

CAUTION: Turn the amplifier on last and off first!

HEALTH HAZARD!

By operating speaker systems with an amplifier, you can produce excessive sound pressure levels that may lead to permanent hearing loss.

Keep away children and amateurs!

There are no serviceable parts inside the speaker system. Maintenance and service operations are only to be carried out by authorized dealers.

3. OPERATING DETERMINATIONS

The speaker systems CONTROL 1 and CONTROL 5 are passive 2-way systems with bass speaker and dome tweeter. The optional subwoofer is the ideal complement to the speakers systems. The speaker systems can be set up as desired or mounted to walls or ceilings via the optional wall holder.

This product is only allowed to be connected with an appropriate power amplifier and was designed for indoor use only.

The given maximum power of the speaker system describes short-term peaks the system can handle as a maximum. The correspondent RMS power is - as of all comparable systems (also from other manufacturers) - significantly lower. The maximum power of the speaker system must never be exceeded. When operating the speaker system, please make sure that the loudspeakers always sound well. When distortions can be heard, either the amplifier or the loudspeaker is overloaded. Overloads can quickly lead to amplifier or speaker damage. In order to avoid damage, please reduce the volume immediately when distortions can be heard. When speaker systems are destroyed by overload, the guarantee becomes void.

By operating speaker systems with an amplifier, you can produce excessive sound pressure levels that may lead to permanent hearing loss.

WARNING!

Speaker systems must only be operated by trained persons. Danger of Life due to crashing speaker systems or hearing loss due to excessive sound pressure levels! The different local conditions have to be considered in terms of safety rules.

This speaker system must never be operated or stockpiled in surroundings where splash water, rain, moisture or fog may harm the speaker system. When using smoke machines, make sure that the speaker system is never exposed to the direct smoke jet and is installed in a distance of 0.5 meters between smoke machine and speaker system.

The ambient temperature must always be between -5^ C and +45^ C. Keep away from direct insulation (particularly in cars) and heaters.

The relative humidity must not exceed 50 % with an ambient temperature of 45^ C.

English

This speaker system must only be installed at a solid, plane, anti-slip, vibration-free, oscillation-free and fire-resistant location.

Please note: when using this speaker system in public or industrial areas, a series of safety instructions have to be followed that this manual can only give in part. The operator must therefore inform himself on the current safety instructions and consider them.

This device is only allowed for an installation via the mounting bracket. In order to safeguard sufficient ventilation, leave 50 cm of free space around the device.

Before installing the system, make sure that the installation area can hold a minimum point load of 5 times the system's load (e.g. weight 20 kg - point load 100 kg).

DANGER!

This speaker system must never be stacked - Danger to Life due to crashing speaker systems!

DANGER!

This speaker system must never be suspended - Danger to Life due to crashing speaker systems!

Operate the speaker system only after having familiarized with its functions. Do not permit operation by persons not qualified for operating the speaker system. Most damages are the result of unprofessional operation!

This speaker system is not designed for road use. The speaker system is designed only for seldom transports. When transporting this speaker system, it must be moved carefully and without force.

Speaker systems must never be transported with cranes.

Never stack heavy objects on this speaker system. Persons must never climb onto this speaker system.

Never use solvents or aggressive detergents in order to clean the speaker system! Rather use a soft and damp cloth.

Please consider that unauthorized modifications on the speaker system are forbidden due to safety reasons!

If this speaker system will be operated in any way different to the one described in this manual, the product may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like crashes, hearing loss etc.

4. INSTALLATION

4.1 Setting up and mounting

The speaker system can be set up as desired. The location must be solid, plane, anti-slip, vibration-free, oscillation-free, and fire-resistant.

For using the speaker system as wall speaker it can be fastened to the wall via the mounting bracket. The installation area must hold a minimum point load of 5 times the system's load (e.g. weight 20 kg - point load 100 kg).

Please note: When using this speaker system in public or industrial areas, a series of safety instructions have to be followed that this manual can only give in part. The operator must therefore inform himself on the current safety instructions and consider them.

English

When rigging, derigging or servicing the device staying in the area below the installation place, on lighting bridges, under high working places and other endangered areas is forbidden.

The operator has to make sure that safety-relating and machine-technical installations are approved by an expert before taking into operation for the first time and after changes before taking into operation another time.

The operator has to make sure that safety-relating and machine-technical installations are approved by an expert after every four year in the course of an acceptance test.

The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled person once a year.

The device should be installed outside areas where persons may walk by or be seated.

IMPORTANT! Overhead rigging requires extensive experience, including (but not limited to) calculating load capacity, installation material being used, and periodic safety inspection of all installation material and the device. If you lack these qualifications, do not attempt the installation yourself, but instead use a professional structural rigger. Improper installation can result in bodily injury and or damage to property.

Caution: Devices in hanging installations may cause severe injuries when crashing down! If you have doubts concerning the safety of a possible installation, do NOT install the device!

4.2 Attachment to the wall via the optional wall holder

The device must only be installed absolutely planar at a vibration-free, oscillation-free and fire-resistant location. Make sure that the device is installed absolutely planar by using a water-level.

The device must be installed out of the reach of people.

This device is only allowed for an installation via the mounting bracket. In order to safeguard sufficient ventilation, leave 50 cm of free space around the device.

The device must always be installed via all fixation holes. Do only use appropriate screws and make sure that the screws are properly connected with the ground.

The durability of the installation depends very much on the material used at the installation area (building material) such as wood, concrete, gas concrete, brick etc. This is why the fixing material must be chosen to suit the wall material. Always ask a specialist for the correct plug/screw combination indicating the maximum load and the building material.

Procedure:

Step 1: Hold the wall holder onto the location where the speaker system is to be installed.

Step 3: On the holder are installation holes. Mark the boreholes with a pen or a suitable tool and drill the holes.

Step 4: Fix the holder to the wall.

Step 5: Fix the speaker system to the holder and adjust the vertical and horizontal angle of inclination.

4.3 Incorrect methods of installation

DANGER!

This speaker system must never be stacked - Danger to Life due to crashing speaker systems!

This speaker system must never be suspended - Danger to Life due to crashing speaker systems!

4.4 Making the connections

Step 1: If the PA system is turned on, turn it off before making any connection.

Step 2: Connect the speaker with suitable speaker cables to the amplifier. Connect the positive pole of the amplifier to the red terminal and the negative pole of the amplifier to the black terminal.

Step 3: When connecting several speakers, make sure that all speakers have the same polarity and that the amplifier is not overloaded.

4.5 Information on speaker cables

• Speaker systems must only be connected via sufficiently dimensioned cables. Cables that are too thin lead to cable heatup or enormous power loss and loss in sound quality.
• For all speaker systems up to 400 Watts, we recommend a cable diameter of 2.5 ~mm^2 , for all other speaker cables 4 ~mm^2 .
• A high damping factor of your amplifier supplies a clear sound reproduction. Unnecessarily long and thin cables will influence the damping factor and thus the low frequencies in a negative way. In order to safeguard good sound quality, the damping factor should lie around 50. The longer a cable has to be, the thicker it should be. In this respect, a damping factor of 200 will be reduced to 47 (8 ohms) when using a 10m long, 2.5mm^2 speaker cable. The power loss at 8 ohms is 1.63% , at 4 ohms 3.25% and at 2 ohms even 6.5% .
• Both cables should be of the same kind and have the same length.
• The maximum cable length should not exceed 30 meters.
  • Always treat cables carefully and protect them from damages during transportation.
  • Install cables always in a structured way and protect them from damage.
• Cables must be installed in a way that no person can stumble over them. Always fix cables with an appropriate tape.
• Cables should be installed directly (no loops, S-shaped overlengths).
• Always install cables far away from power cables (never closely parallel).
• Never put heavy objects like speaker systems, flightcases etc. on cables.
• Never operate cables wound up.

5. OPERATION

After having connected the speaker system, turn all level controls of the amplifier to zero to avoid a possible switching-on noise. The last device to be switched on is the power amplifier. Now adjust the volume with the level controls. Always make sure that the output signal is not distorted, otherwise your speakers may be damaged.

During operation, please make sure the speaker always sounds well. When distortions can be heard, either the amplifier or the speaker is overloaded. Overloads can quickly lead to amplifier or speaker damage. In order to avoid damage, please reduce the volume immediately when distortions can be heard. When speakers are destroyed by overload, the guarantee becomes void.

Always check the sound pressure level with a meter in order to keep to the threshold.

If you want to switch off the system, switch off the power amplifier first and then the pre-amplifiers in order to avoid acoustic shocks on the speakers.

6. CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an expert after every four years in the course of an acceptance test.

The operator has to make sure that safety-relating and machine-technical installations are inspected by a skilled person once a year.

The following points have to be considered during the inspection:

1) All screws used for installing the speaker systems or parts of the speaker system have to be tightly connected and must not be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension, trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or sediments. Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed.
4) If the speaker system is installed overhead, the inspection must include if the eye-bolts are still well tightened. Otherwise the eye-bolts have to be tightened hand-tight again.
5) If the speaker system is secured via clamping belts, the inspection must include if the clamping belts are still well fixed. Otherwise fix clamping belts again.

We recommend a frequent cleaning of the speaker system. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents!

There are no serviceable parts inside the speaker system. Maintenance and service operations are only to be carried out by authorized dealers.

If the speaker system distorts, one of the loudspeakers may be defective. Test the speaker system once more with another amplifier. If the sound remains distorted, the speaker system should not be operated any more in order to prevent further damage. Please contact your dealer.

If clacking sounds are heard from the speaker system, screws may have loosened due to the continuous vibrations. The speaker system should be checked by a specialist. Especially for public use, the speaker system should be checked before every operation so that the speaker system and the speakers in the systems are always well fixed.

Should you need any spare parts, please use genuine parts.

Should you have further questions, please contact your dealer.

7. TECHNICAL SPECIFICATIONS

	Control 1 Control 5
Rated power: 30 W RMS	50 W RMS
Program power: 60 W 100	W
Components: 13 cm/5" wo	ofer,2.5 cm/1" tweeter	20 cm/8" woofer,2.5 cm/1" tweeter
Connections: Terminal 2-pole terminal
Max. SPL (1 m): 89 dB 90	dB
Impedance:	4 Ω8 Ω
Frequency-range:	50 Hz - 18 kHz	40 Hz - 20 kHz
Dimensions (H x W x D):	230 x 150 x 150 mm	255 x 230 x 400 mm
Weight:	1.6 kg	6 kg

7.1 Accessories

OMNITRONIC Subwoofer for control systems No. 1	1036580
Wall-mounting for Control 1, 1 pair No. 11229640
Wall-mounting for Control 5 white /per pc No. 11229646
Wall-mounting XY Control 5 white /per pc. No. 11229649

Please note: Every information is subject to change without prior notice. 09.07.2010 ©