FBR-1403TX - Router LEVELONE - Free user manual and instructions
Find the device manual for free FBR-1403TX LEVELONE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router with ADSL2+ modem |
| Model | FBR-1403TX |
| Brand | LevelOne |
| Dimensions (approx.) | 180 x 120 x 30 mm |
| Weight (approx.) | 300 g |
| Power Supply | 12V DC, 1A |
| WAN Port | 1 x RJ11 (ADSL) |
| LAN Ports | 4 x 10/100 Fast Ethernet |
| Wireless Standard | IEEE 802.11g/b |
| Wireless Speed | Up to 54 Mbps |
| Security | WEP, WPA, WPA2, SPI firewall, NAT |
| ADSL Standard | ANSI T1.413, ITU G.992.1/2/3/5 (ADSL2+) |
| Routing Features | Static routing, DHCP server, QoS |
| Management | Web-based interface, SNMP |
| LED Indicators | Power, ADSL, LAN, WLAN, Status |
| Antenna | 1 x external 2dBi (detachable) |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Cleaning Instructions | Wipe with a dry soft cloth; do not use liquids |
| Spare Parts | Power adapter, RJ11 cable, RJ45 cables, antenna |
Frequently Asked Questions - FBR-1403TX LEVELONE
How do I reset the LevelOne FBR-1403TX to factory defaults?
Press and hold the Reset button on the back panel for about 10 seconds until all LEDs flash. Release the button; the router will reboot with factory settings.
What is the default IP address and login for the router?
The default IP is 192.168.1.1. Use username admin and password admin (or blank).
How to set up ADSL connection on the FBR-1403TX?
Connect the phone line to the ADSL port. Log into the web interface, go to Setup > WAN, select your country and ISP, enter your username and password, and save.
Can I use the FBR-1403TX as a switch only?
Yes, you can disable the NAT feature and use it as a switch by connecting a LAN port to your main router and turning off DHCP server.
How to update the firmware of the router?
Download the latest firmware from the LevelOne website. Go to Administration > Firmware Upgrade in the web interface, select the file, and click Upload. Do not power off during update.
Why is my wireless connection slow?
Check for interference from other devices, change the wireless channel in Wireless Settings, and ensure you are using WPA2 encryption. Also, stay within range of the antenna.
How to configure port forwarding on the FBR-1403TX?
Go to Advanced > Virtual Server. Enter a rule name, select service (or custom port range), enter local IP, and enable the rule. Save settings.
What is the maximum number of wireless clients?
The router supports up to 253 wireless clients, but performance may degrade with many simultaneous connections.
Does the router support VPN passthrough?
Yes, it supports PPTP, L2TP, and IPSec passthrough. Enable these in the VPN section.
How to enable WPS on the FBR-1403TX?
Log into the web interface, go to Wireless > WPS. Enable WPS and use either PIN or button method to connect devices.
User questions about FBR-1403TX LEVELONE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual FBR-1403TX - LEVELONE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FBR-1403TX by LEVELONE.