TX-SA605 - Receiver ONKYO - Free user manual and instructions
Find the device manual for free TX-SA605 ONKYO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Receiver |
| Brand | Onkyo |
| Model | TX-SA605 |
| Channels | 7.1 |
| Power Output | 130 W per channel (6 ohms, 1 kHz, 1% THD) |
| HDMI Version | 1.3a |
| HDMI Inputs/Outputs | 2 inputs / 1 output |
| Audio Decoding | Dolby TrueHD, DTS-HD Master Audio |
| Video Upscaling | 1080p |
| Dimensions (W x H x D) | 435 x 174 x 376 mm |
| Weight | 12.2 kg |
| Power Consumption | 540 W |
| Standby Power Consumption | 0.7 W |
| FM/AM Tuner | Yes |
| Bi-amping Capability | Yes |
| Speaker Impedance | 4 - 16 ohms |
| Frequency Response | 5 Hz - 100 kHz |
| Signal-to-Noise Ratio | 106 dB |
| Remote Control | Yes (RI remote) |
Frequently Asked Questions - TX-SA605 ONKYO
How do I connect my TV to the TX-SA605?
Use an HDMI cable from your TV's HDMI output to the receiver's HDMI input. Make sure the TV is set to the correct input source.
Can I use the receiver with a 4K TV?
No, the TX-SA605 only supports up to 1080p video. For 4K, consider a newer receiver.
How do I set up the speaker system?
Connect front, center, surround, and subwoofer speakers to the corresponding terminals. Then run the automatic speaker calibration using the supplied microphone.
What sound modes are available?
Dolby Digital, DTS, Dolby Pro Logic II, DTS Neo:6, and various listening modes like Direct, Stereo, and All Channel Stereo.
How do I reset the receiver to factory defaults?
Press and hold the 'VCR/DVR' button while pressing the 'STANDBY/ON' button. The display will show 'Clear' to confirm.
Why is there no sound from the subwoofer?
Check that the subwoofer is properly connected, powered on, and that the receiver's speaker settings are configured to include a subwoofer (e.g., 'Subwoofer: Yes').
Can I use banana plugs with this receiver?
Yes, the speaker terminals accept banana plugs. Remove the plastic caps to insert them.
How do I update the firmware?
The TX-SA605 does not have network connectivity for firmware updates. Firmware is updated via CD or by an authorized service center.
What is the maximum power output for all channels driven?
The TX-SA605 is rated at 130W per channel (6 ohms, 1 kHz, 1% THD) for two channels driven. For all channels, total power is lower; refer to the manual for exact specs.
Does the receiver support Bluetooth?
No, the TX-SA605 does not have built-in Bluetooth. You can add a Bluetooth adapter via an analog input.
User questions about TX-SA605 ONKYO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual TX-SA605 - ONKYO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TX-SA605 by ONKYO.