TX-SR800 - Receiver ONKYO - Free user manual and instructions
Find the device manual for free TX-SR800 ONKYO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AV Receiver |
| Brand | Onkyo |
| Model | TX-SR800 |
| Channels | 7.1 |
| Power Output | 100 W per channel (8 ohms, 20 Hz–20 kHz, 0.08% THD) |
| Dimensions (W x H x D) | 435 x 150 x 369 mm |
| Weight | 11.0 kg |
| Power Supply | AC 120 V, 60 Hz (US) / 230 V, 50 Hz (EU) |
| Power Consumption | 580 W (standby: 1.2 W) |
| Audio Inputs | 6 digital (3 optical, 3 coaxial), 7 analog (including phono) |
| Audio Outputs | 2 digital optical, 1 coaxial, 7.1 pre-outs, subwoofer pre-out |
| Video Inputs | 4 component, 4 composite, 3 S-Video |
| Video Outputs | 2 component, 2 composite, 1 S-Video |
| HDMI | None (pre-HDMI era) |
| Surround Formats | Dolby Digital, DTS, Dolby Pro Logic II |
| Tuner | AM/FM with 30 presets |
| Remote Control | Included, with learning function |
| Speaker Impedance | 4–16 ohms |
| Frequency Response | 20 Hz–20 kHz ±0.5 dB (direct mode) |
| Signal-to-Noise Ratio | 106 dB (IHF-A) |
| Cleaning | Wipe with a dry, soft cloth; do not use solvents |
| Safety | Do not expose to moisture; ensure adequate ventilation |
| Spare Parts | Contact authorized service centers; remote and fuse available |
Frequently Asked Questions - TX-SR800 ONKYO
What is the power output of the Onkyo TX-SR800?
The TX-SR800 delivers 100 watts per channel into 8 ohms with 0.08% THD, driving up to 7 speakers plus a subwoofer.
Does the TX-SR800 support HDMI?
No, this model predates HDMI. It uses component, composite, and S-Video for video connections, and digital optical/coaxial for audio.
How do I connect a turntable?
Use the PHONO input on the rear panel. Ensure your turntable has a moving magnet cartridge; if it has a moving coil, you may need a separate preamp.
Can I use 4-ohm speakers?
Yes, the TX-SR800 is rated for 4 to 16 ohm speakers. However, using 4-ohm speakers may cause the receiver to run hotter; ensure proper ventilation.
How to set up the FM/AM tuner?
Connect the provided antenna, press TUNER, then use TUNING to scan stations. Press MEMORY to store presets (up to 30).
What surround sound formats are supported?
It supports Dolby Digital, DTS, and Dolby Pro Logic II for matrix decoding from stereo sources.
How do I reset the receiver to factory settings?
While the unit is off, press and hold the VCR/DVD button, then press ON/STANDBY. Release when 'CLEAR' appears on the display.
Why is there no sound from the subwoofer?
Ensure the subwoofer is connected to the SUBWOOFER PRE OUT jack. In the speaker setup menu, set 'Subwoofer' to 'Yes' and adjust crossover frequency (default 80 Hz).
Can I use the remote with other devices?
Yes, the remote has a learning function. Press and hold LEARN, point the original remote at the TX-SR800 remote, and press the corresponding button.
Where can I find the user manual?
You can download the PDF manual from notice-facile.com or the Onkyo support website. It is also available in multiple languages.
User questions about TX-SR800 ONKYO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual TX-SR800 - ONKYO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TX-SR800 by ONKYO.