ST-125T-KFA-ES - Heating STANLEY - Free user manual and instructions
Find the device manual for free ST-125T-KFA-ES STANLEY in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fan Heater |
| Brand | Stanley |
| Model | ST-125T-KFA-ES |
| Power Supply | 220-240 V ~ 50/60 Hz |
| Power Output | 2000 W |
| Dimensions (W x H x D) | 25.0 x 15.0 x 30.0 cm |
| Weight | 2.5 kg |
| Heating Type | Ceramic element |
| Thermostat Control | Adjustable |
| Fan Speeds | 2 speeds (low, high) |
| Oscillation | Yes, 70° wide |
| Safety Features | Overheat protection, tip-over switch |
| Noise Level | ≤ 45 dB |
| Room Coverage | Up to 25 m² |
| Cleaning | Wipe with dry cloth; do not use water |
| Maintenance | Check and clean inlet/outlet regularly |
| Spare Parts Availability | Replacement elements and switches available |
| Warranty | 2 years |
Frequently Asked Questions - ST-125T-KFA-ES STANLEY
How do I clean the heater?
Unplug the heater and wait for it to cool down. Use a soft dry cloth to wipe the exterior. For the grilles, use a vacuum cleaner with a brush attachment. Do not use water or any liquids.
What should I do if the heater turns off unexpectedly?
The heater may have activated its overheat protection or tip-over switch. Check if the heater is on a flat, stable surface and ensure the air intakes are not blocked. Let it cool for 10-15 minutes before restarting.
Can I use an extension cord?
It is recommended to plug the heater directly into a wall outlet. If an extension cord is necessary, use a heavy-duty cord rated for at least 10 amps (2200 W) and keep it fully uncoiled.
What is the power consumption?
The heater has a maximum power consumption of 2000 W at the highest setting. Lower settings consume less power.
How do I adjust the thermostat?
Turn the thermostat knob clockwise to increase the desired temperature. The heater will automatically cycle on and off to maintain the set temperature.
Is the heater suitable for bathroom use?
No, this heater is not designed for bathroom or wet locations. It should only be used in dry indoor areas.
What does the tip-over switch do?
The tip-over switch automatically shuts off the heater if it is accidentally knocked over, preventing fire hazards. It must be reset by placing the heater upright and restarting.
How often should I replace the filter?
This model has a permanent filter that does not need replacement. Clean it regularly with a vacuum to maintain airflow.
Can I use the heater with a smart plug?
Yes, the heater can be used with a smart plug rated for 10 A or higher. However, ensure the smart plug supports resistive loads and does not exceed the rated power.
Where can I find spare parts like the element or switch?
Spare parts are available through authorized Stanley service centers. Contact customer support with your model number ST-125T-KFA-ES for assistance.
User questions about ST-125T-KFA-ES STANLEY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual ST-125T-KFA-ES - STANLEY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ST-125T-KFA-ES by STANLEY.
