STYRBAR 104.883.64 - Light IKEA - Free user manual and instructions

Product Type	Wireless Dimmer Remote Control
Model	STYRBAR 104.883.64
Brand	IKEA
Dimensions	114 x 44 x 22 mm
Weight	45 g
Power Supply	2 x AAA batteries (1.5V)
Battery Life	Approximately 2 years (based on usage)
Wireless Range	Up to 10 meters indoors
Frequency	2.4 GHz (Zigbee)
Compatibility	IKEA TRÅDFRI series (gateway required for remote access)
Max Number of Devices	Controls up to 10 bulbs per remote
Functions	On/off, dimming, scene control
Mounting	Place on wall using included adhesive tape or stand
Material	ABS plastic
Color	White
Maintenance	Wipe with dry cloth
Safety	Do not disassemble, keep dry
Included Items	Remote, adhesive tape, battery cover, manual
Repair	No user-serviceable parts, contact IKEA for replacement
Environmental	Recycle according to local regulations

Frequently Asked Questions - STYRBAR 104.883.64 IKEA

How do I pair the STYRBAR remote with my IKEA TRÅDFRI bulb?

To pair, bring the remote within 5 cm of the bulb. Press and hold the pairing button (on the back of the remote) for 10 seconds. The bulb will flash to confirm pairing. Release the button.

What batteries does the STYRBAR remote use?

The STYRBAR remote uses 2 x AAA batteries (1.5V). Alkaline batteries are recommended. Batteries are not included.

How many bulbs can I control with one STYRBAR remote?

You can control up to 10 IKEA TRÅDFRI bulbs with a single STYRBAR remote. Each bulb must be paired individually.

What is the range of the STYRBAR remote?

The wireless range is up to 10 meters indoors. Walls and obstacles may reduce the range. For best performance, keep the remote and bulbs within line of sight.

Can I use the STYRBAR remote without a gateway?

Yes, the STYRBAR remote can control TRÅDFRI bulbs directly without a gateway for basic on/off and dimming. However, advanced features like schedules and remote access require a TRÅDFRI gateway.

How do I reset the STYRBAR remote?

To reset, remove the batteries, press and hold any button for 5 seconds, then reinsert the batteries. The remote will flash to indicate reset. You must then re-pair it with your bulbs.

My STYRBAR remote is not controlling the lights, what should I do?

First, check the batteries and replace if needed. Then, ensure the remote and bulbs are within range. Re-pair the remote by following the pairing procedure. If still not working, reset the remote and try again.

Can I mount the STYRBAR remote on the wall?

Yes, the remote comes with adhesive tape for wall mounting. Clean the surface, attach the tape to the back of the remote, and press firmly on the wall. It can also be used as a standalone remote.

Is the STYRBAR remote waterproof?

No, the STYRBAR remote is not waterproof. It should be kept dry and away from moisture. Use only indoors.

How do I replace the batteries in the STYRBAR remote?

Slide the battery cover off the back, remove old batteries, insert 2 new AAA batteries with correct polarity (+/-), and replace the cover. Dispose of old batteries responsibly.

USER MANUAL STYRBAR 104.883.64 IKEA

Simple line drawing of a rounded rectangular device with circular and directional symbols on both sides (no text or labels)

Design and Quality IKEA of Sweden

English

Español

Português

中文 15

繁中 18

한국어 21

4 日本語 24

For Apple devices, download the app using the App Store. For Android devices, download the app using Google Play store.

Note: If you have a TRÄDFRI gateway please use IKEA Home smart 1 app.

Getting started with DIRIGERA hub

Download the IKEA Home smart app and follow the instructions on screen to add the product to your IKEA Home smart system.<

4Eng

Remote control functions

Short press to turn on. To dim up, press and hold the button.

Short press to turn off. To dim down, press and hold the button.

Change white spectrum or colours.

Pairing: Add IKEA Smart Lighting products to your system. See instructions below.

Adding devices to your remote control

When the remote control is sold together with a light source (in the same package), they are already paired. If the remote control is purchased separately, you must manually pair it to your light source. To add light sources, just repeat the steps below.

1. Make sure that your light source is installed and the main power switch is turned on.
2. Hold the remote control close to the light source you want to add (no more than 5 cm away).
3. Press and hold the pairing button for at least 10 seconds. A red light will shine steadily on the remote control. Your light source will begin to dim and flash one time to indicate that it has been successfully paired.

Up to 10 light sources can be paired with 1 remote control. Make sure to pair them one at a time. If the light sources are close to each other, disconnect those that have already been paired from the main power switch.

Factory reset your devices

For light sources:

Toggle the main switch 6 times.

For remote control:

Press the pairing button 4 times within 5 seconds.

Synchronizing

If your light source becomes unsynchronized, a long press on the left (<) or right (>) buttons will return the light source to its default setting (2700K).

Changing the battery

When the remote control is used regularly and as intended, the batteries will last for approximately 2 years.

When it's time to replace the battery, a red LED indicator will flash when you press any button on the remote control.

Open the battery lid and replace the battery with two new AAA/HR03 batteries.

Caution!

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

Important!

• The remote control is for indoor use only and can be used in temperatures ranging from 0°C to 40°C.
• Do not leave the remote control in direct sunlight or near any heat source, as it may overheat.
• The range between the remote control and the receiver are measured in open air.
• Different building materials and placement of the units can affect the wireless connectivity range.

Care instructions

To clean the remote control, wipe with a soft cloth moistened with a little mild detergent. Use another soft, dry cloth to wipe dry.

Note!

Never use abrasive cleaners or chemical solvents as this can damage the product.

Recommended battery types:

2 x IKEA LADDA 900 (AAA/HR03, 1.2V, 900mAh, Ni-MH) (Not included)

Do not mix batteries of different capacities, types or date stamps.

TECHNICAL DATA

Type: E2001

Name: STYRBAR Remote control stainless

Type: E2002

Name: STYRBAR Remote control white

Input: 3V, 2x AAA/HR03 LADDA batteries

Range: 10 m in open air.

For indoor use only

Operating frequency: 2405-2480 MHz

IP-class: IP44

Manufacturer: IKEA of Sweden AB

Address:

Box 702, SE-343 81 Älmhult, SWEDEN

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with loca environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

Español

委製商：IKEA of Sweden AB

地址：Box 702, SE-343 81 Älmhult, SWEDEN

注意！

제조업체: IKEA of Sweden AB

주소: Box 702, SE-343 81 Älmhult, SWEDEN

Complies with IMDA Standards DA106634

© Inter IKEA Systems B.V. 2020

AA-2272198-4