Wireless Earbuds Gen 2 - Wireless Earbuds Cubitt - Free user manual and instructions
Find the device manual for free Wireless Earbuds Gen 2 Cubitt in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | True Wireless Stereo Earbuds |
| Brand | Cubitt |
| Model | Wireless Earbuds Gen 2 |
| Bluetooth Version | 5.0 |
| Wireless Range | Up to 10 meters (33 feet) |
| Driver Size | 10mm Dynamic |
| Frequency Response | 20Hz - 20kHz |
| Impedance | 32Ω |
| Battery Life (Earbuds) | Up to 5 hours per charge |
| Battery Life (with Case) | Up to 20 hours total |
| Charging Case Battery | 400mAh Lithium-ion |
| Charging Time | 1.5 hours for earbuds, 2 hours for case |
| Charging Port | Micro-USB |
| Weight (per earbud) | 4.5 grams |
| Weight (charging case) | 35 grams |
| Dimensions (earbud) | 23 x 18 x 16 mm |
| Dimensions (case) | 62 x 48 x 26 mm |
| Water Resistance | IPX4 (sweat and splash proof) |
| Controls | Touch controls (play/pause, volume, call) |
| Microphone | Built-in with noise reduction |
| Noise Cancellation | Passive noise isolation (ear tips) |
| Supported Audio Codecs | SBC, AAC |
| Compatibility | Any Bluetooth-enabled device (smartphone, tablet, PC) |
| Maintenance | Clean with a soft, dry cloth; avoid liquids |
| Safety | Do not expose to extreme temperatures or moisture |
| Spare Parts | Replaceable ear tips (S/M/L), USB cable included |
Frequently Asked Questions - Wireless Earbuds Gen 2 Cubitt
How do I pair my Cubitt Wireless Earbuds Gen 2 with my phone?
Remove the earbuds from the charging case. They will automatically enter pairing mode. Enable Bluetooth on your phone and select 'Cubitt Gen 2' from the available devices. If prompted, enter '0000' or confirm pairing.
What is the battery life of these earbuds?
The earbuds provide up to 5 hours of playback on a single charge. The charging case adds an additional 15 hours, for a total of 20 hours.
How do I reset the earbuds?
Place both earbuds in the charging case and close the lid. Wait 10 seconds, then remove them again. To factory reset, tap the touch button on each earbud 5 times quickly until you hear a beep.
Are these earbuds waterproof?
They have an IPX4 rating, meaning they are resistant to sweat and light splashes. Do not submerge in water or use while swimming.
How do I control music and calls?
Use the touch controls: single tap to play/pause, double tap to skip forward, triple tap to go back. Long press to adjust volume (right: volume up, left: volume down). To answer a call, tap once; to reject, long press.
Can I use only one earbud at a time?
Yes, you can use the left or right earbud independently. Simply remove one from the case and it will connect as a mono headset. The other can be used later in stereo.
What should I do if the earbuds are not charging?
Check that the charging pins on the earbuds and case are clean. Gently clean them with a dry cotton swab. Ensure the case has battery by connecting it to a power source. Try resetting the earbuds.
How do I clean the earbuds?
Wipe the earbuds and charging case with a soft, dry cloth. Do not use liquids or abrasive materials. Remove ear tips occasionally and rinse with water, dry thoroughly before reattaching.
What is the warranty period?
Cubitt offers a 12-month limited warranty against manufacturing defects. Keep your proof of purchase for warranty claims.
Can I replace the ear tips?
Yes, the ear tips are removable and replaceable. Your package likely includes three sizes (S, M, L). Replacement tips can be purchased separately if needed.
User questions about Wireless Earbuds Gen 2 Cubitt
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wireless Earbuds in PDF format for free! Find your manual Wireless Earbuds Gen 2 - Cubitt and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Wireless Earbuds Gen 2 by Cubitt.
