FM US 2 UP - Home Automation JUNG - Free user manual and instructions
Find the device manual for free FM US 2 UP JUNG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Radio Receiver/Actuator |
| Brand | JUNG |
| Model | FM US 2 UP |
| Category | Home Automation |
| Application | Remote switching and dimming of lighting and appliances |
| Mounting Type | Flush-mounted (UP) |
| Dimensions (HxWxD) | 45 x 45 x 20 mm |
| Weight | Approx. 45 g |
| Power Supply | 230 V AC, 50 Hz |
| Power Consumption | < 0.5 W standby |
| Output | 1 relay channel, max 10 A |
| Control | Wireless radio frequency, 868 MHz |
| Range | Approx. 100 m in open field |
| Protocol | Proprietary JUNG radio protocol |
| Degree of Protection | IP20 |
| Ambient Temperature | -5 °C to +45 °C |
| Humidity | 5% to 95% non-condensing |
| Certification | CE, VDE |
| Material | Plastic, flame retardant |
| Maintenance | Clean with dry cloth; no internal parts serviceable |
| Safety | Installation by qualified electrician required; disconnect power before servicing |
| Spare Parts | Not available; device must be replaced if defective |
| Warranty | 2 years from date of purchase |
| Manual Availability | Free PDF download at notice-facile.com |
Frequently Asked Questions - FM US 2 UP JUNG
How do I pair the FM US 2 UP with a remote controller?
To pair, press the programming button on the device for 2 seconds until the LED flashes. Then press the desired channel button on the remote within 30 seconds. The LED will stay on to confirm successful pairing.
What is the maximum load the FM US 2 UP can switch?
The maximum load is 10 A for resistive loads (e.g., incandescent lamps) and 5 A for inductive loads (e.g., motors). For LED lamps, refer to the manual for derating factors.
Can the FM US 2 UP be used with LED lighting?
Yes, but ensure the total LED load does not exceed 200 W and use leading-edge dimmable LEDs if dimming is required. Non-dimmable LEDs can be switched on/off.
How do I reset the device to factory settings?
Press and hold the programming button for 10 seconds until the LED rapidly flashes. Release the button. The device will reboot and all paired remotes will be erased.
Is the FM US 2 UP compatible with KNX systems?
No, the FM US 2 UP uses a proprietary JUNG radio protocol and is not directly compatible with KNX. For KNX integration, a gateway such as JUNG Radio Gateway is required.
What is the wireless range of the FM US 2 UP?
The range is approximately 100 m in open field. In buildings, the range may be reduced to 20-30 m depending on walls and obstacles. Avoid placing near large metal objects.
How do I mount the FM US 2 UP correctly?
Mount the device in a flush-mounted box (standard 60 mm depth). Connect the phase (L) and neutral (N) wires to the corresponding terminals. Load is connected to the relay output. Ensure the mains voltage is switched off during installation.
Can I integrate the FM US 2 UP with a smart home system like Alexa?
Direct integration is not possible. You need a JUNG smart home gateway (e.g., JUNG HOME) that bridges the radio protocol to IP-based systems. Check compatibility with your specific gateway.
What does the LED indicator on the device mean?
The LED indicates: solid on = device paired and relay on; slow flash = pairing mode; rapid flash = factory reset; off = device not powered or relay off.
Where can I download the user manual for the FM US 2 UP?
The free PDF manual is available for download at notice-facile.com. Visit the product page and click the Download button. You can also request a translated version by email.
User questions about FM US 2 UP JUNG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Home Automation in PDF format for free! Find your manual FM US 2 UP - JUNG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FM US 2 UP by JUNG.
