Slim 5000 - Chargeur pour appareils mobiles Kiano - Free user manual and instructions

Product Type	Portable Charger (Power Bank)
Brand	Kiano
Model	Slim 5000
Battery Capacity	5000 mAh
Dimensions	Approx. 140 x 70 x 10 mm
Weight	Approx. 150 g
Input	Micro USB, 5V/2A
Output	USB-A, 5V/2.1A (max)
Charging Time	Approx. 3-4 hours
Number of Output Ports	1
Main Functions	Charge smartphones, tablets, and other USB devices
LED Indicators	4 LEDs for battery level
Protection Features	Overcharge, overdischarge, short circuit, and overcurrent protection
Material	Aluminum alloy casing
Color	Black/Silver (may vary)
Included Accessories	Micro USB cable, user manual
Cleaning and Maintenance	Wipe with a soft, dry cloth. Do not use liquid cleaners.
Safety Warnings	Do not expose to water or fire. Keep away from children.
Spare Parts and Repairability	Not available. Cannot be repaired by user.
Compliance	CE, RoHS

Frequently Asked Questions - Slim 5000 Kiano

How do I check the battery level of the Kiano Slim 5000?

Press the power button on the side. The LED indicators will light up to show the remaining capacity: 1 LED = 25%, 2 LEDs = 50%, 3 LEDs = 75%, 4 LEDs = 100%.

Can I charge my tablet with this power bank?

Yes, the Kiano Slim 5000 can charge tablets, but the charging speed may be slower due to the 2.1A output. It is best suited for smartphones.

How long does it take to fully charge the Kiano Slim 5000?

With a 5V/2A charger, it takes approximately 3-4 hours to fully charge the power bank.

Is it safe to leave the power bank plugged in overnight?

Yes, the device has overcharge protection, so it will stop charging once full. However, it is recommended to unplug it after charging.

What devices can I charge with the Slim 5000?

You can charge most USB-powered devices such as smartphones, Bluetooth headphones, cameras, and small tablets. It is not suitable for laptops.

How do I clean the power bank?

Use a soft, dry cloth to wipe the surface. Do not use water, alcohol, or abrasive cleaners.

What should I do if the power bank gets wet?

Do not use it. Dry it with a cloth and let it air dry completely. If water has entered the device, discard it safely to avoid short circuits.

Can I replace the battery inside the Slim 5000?

No, the battery is built-in and not replaceable. Attempting to open the device may damage it and void the warranty.

Does the power bank support fast charging?

The Slim 5000 does not support fast charging protocols like Quick Charge or USB-PD. It outputs standard 5V up to 2.1A.

What is the warranty period for Kiano Slim 5000?

Typically, Kiano products come with a 12-month warranty against manufacturing defects. Check your purchase receipt for details.

USER MANUAL Slim 5000 Kiano

CZEŚCI PRODUKTU

PRODUCT COMPONENT INTRODUCTION

1.2.0 USB Input
2. Micro USB Output
3. Output 5V / 1A
4. USB Input
5. LED light
6. Output 5V / 2.1A
7. Powerswitch

BATTERY CHARGING

To charge the device, use a USB/micro USB cable. Connect the cable from the side of a USB port into a power outlet with the maximum voltage up to 5 V DC. A charger with a micro USB port or a USB port in a turned on PC may be a power supply. Connect the cable from the side of micro USB port to the micro USB port in the device IN 5V. LED is on when the device is charging. Disconnect the device from a power supply when it is fully charged.

LED small lighter using method: Double press the power button and turns on. Repeat the action in turns down. it can continuously light on as long as 380 hours at full of power status.

Power is left with the power bank, as below sheet:

Power indicator	One light on	Two light on	Three light on	Four light on
SLIM 10.000	25% 25 - 50%	50 - 75% 75	100%

EXTERNAL DEVICE CHARGING

To charge an external device, use the USB/micro USB cable included in the set. Charging starts automatically and lasts until the external device is fully charged or until energy in a power bank is depleted. Disconnect the device when it is fully charged.

SAFETY

• Read and keep this instruction manual.
• Do not attempt to disassemble and do not take off the casing of the device. Any repairs should be carried out by authorised service centre.
• Use only original accessories supplied by the manufacturer.
• The device should not be directly exposed to sunlight and other heat sources.
• Ensure the device does not come into contact with water, damp or steam to avoid electrocution.

INSTRUCTIONS

All materials from the waste device may be recovered in the form of new materials or energy. Recycle packaging and instruction manuals in line with your local recycling plan.

This symbol indicates that the device may not be disposed together with normal household waste.

The device complies with the RoHS Directive which provides for restrictions on the stage of production on introducing hazardous substances to electronics.

The device and accessories comply with directives concerning safety, health protection and environmental protection referred by the declaration of conformity.

2nd class device in which reinforced insulation was used, ensuring protection both against direct and indirect contact. Because of using reinforced insulation, it is not necessary to connect the casing of the device to a protective grounding cable.

Separate collection allows to effectively segregate waste and recycle it for reuse.

When unpacking the product, divide waste into cardboard and blisters, remembering about waste sorting.

The product is intended for use in a residential, commercial and light industrial environment.

By disposing this type of waste in appropriate places, you contribute to protection of natural resources.

Importer/manufacturer shall not be liable for losses and/or personal injuries caused by incorrect handling or use by user.