21070 - Uncategorized K&M - Free user manual and instructions

Product Type	Microphone Stand
Model	21070
Brand	K&M
Material	Steel
Height (Minimum)	28.7 in (73 cm)
Height (Maximum)	62.2 in (158 cm)
Base Diameter	10.2 in (26 cm)
Weight	4.4 lbs (2 kg)
Base Type	Round, collapsible
Clutch Type	Single friction joint
Thread	5/8" male (EU: 3/8" with adapter)
Boom Arm Included	No
Folding Feature	Yes, for transport
Color	Black
Surface Finish	Powder coated
Intended Use	Studio and stage microphone positioning
Compatibility	Standard mic clips and shock mounts
Maintenance	Occasional tightening of clutch knob
Accessories Included	None

Frequently Asked Questions - 21070 K&M

How do I adjust the height of the stand?

Loosen the clutch knob, slide the upper tube to desired height, then tighten the knob firmly.

Is the base foldable for transport?

Yes, the base legs can be folded inward for compact storage and transport.

What thread size does the stand have?

It has a standard 5/8" male thread. An adapter to 3/8" is included for European equipment.

Can I use this stand with a heavy microphone?

Yes, the stand supports up to 5 kg (11 lbs) safely. For heavier loads, consider a tripod stand.

How do I clean the stand?

Wipe with a soft, dry cloth. Avoid harsh chemicals. For stubborn dirt, use mild soapy water.

Is a boom arm available for this model?

No, the 21070 is a straight stand. A separate boom attachment can be used if compatible.

What is the weight of the stand?

The stand weighs approximately 2 kg (4.4 lbs), making it portable yet stable.

Does the stand come with a microphone clip?

No, microphone clips or shock mounts are sold separately.

Can the stand be used outdoors?

Yes, but avoid extended exposure to rain or moisture to prevent rust.

How do I tighten a loose clutch?

Use a screwdriver to adjust the tension screw inside the clutch knob if available, or replace the friction pad.

USER MANUAL 21070 K&M

Boom arm one-piece design

Boom arm clamping wing nut

Boom arm length 805 mm

Height from 900 to 1,600 mm

Height adjustment clutch

Leg construction socket with foldable legs

Material steel

Product Category Baseline

Rod combination 2-piece folding design

Special features zinc die-cast base

Threaded connector 3/8"

Type black

Weight 2.5 kg

Low-priced all-metal-stand. Consists of tubing assembly, boom arm and zinc die-cast base with long folding legs.

Square swivel joint with large wing nut.

Black adjustable microphone stand with tripod base (no text or symbols visible)