AX-MAZCAM - Kit voiture Axxess - Free user manual and instructions

Product Type	Vehicle Integration Interface
Compatible Vehicles	Mazda (specific models: CX-5, Mazda3, Mazda6, etc.)
Dimensions (L x W x H)	Approximately 3.5 x 2.5 x 1.2 inches
Weight	0.2 lbs (90 g)
Power Input	12V DC vehicle power
Retains Factory Features	Steering wheel controls, audio auxiliary input, factory amplifier integration
Installation Type	Plug-and-play harness, no wire cutting required
Supported Aftermarket Radios	Most single-DIN and double-DIN units with compatible wiring
Maintenance	No regular maintenance required; keep connectors clean and dry
Cleaning Instructions	Wipe with a dry cloth; avoid solvents and water
Safety Precautions	Disconnect vehicle battery before installation; avoid short circuits
Spare Parts Availability	Replacement harnesses and connectors available from Axxess or retailers
Repairability	Non-repairable; replace entire unit if damaged
Certifications	Designed to meet OEM vehicle specifications
Warranty	1-year limited warranty against defects

Frequently Asked Questions - AX-MAZCAM Axxess

Which Mazda vehicles is the AX-MAZCAM compatible with?

The AX-MAZCAM is designed for select Mazda models including Mazda3 (2004-2009), Mazda5, Mazda6 (2003-2008), CX-7, CX-9, and RX-8. Check the Axxess website for a full list.

Does it retain factory steering wheel controls?

Yes, the interface retains factory steering wheel controls with most aftermarket radios. It translates the resistance signals to a standard format.

Can I install this kit myself?

Yes, it is a plug-and-play harness. Disconnect the battery, connect the harness between the car and the radio, and secure the module. No wire splicing is needed.

Does it work with my aftermarket radio brand?

It works with most major brands (Pioneer, Kenwood, Sony, Alpine, etc.) as long as they support standard aftermarket wiring and steering wheel control input.

Will the AX-MAZCAM retain the factory auxiliary input?

Yes, it includes a 3.5mm auxiliary input adapter to retain the factory AUX source.

What if my vehicle has a factory amplifier?

The interface integrates with most factory amplifier systems, providing a proper signal and turning on the amplifier.

Is programming required after installation?

No programming is required for basic functions. However, some features like steering wheel control mapping may need adjustment via your radio's settings.

Does the kit include wiring instructions?

Yes, a detailed instruction manual is included with wiring diagrams for your specific vehicle and radio.

What is the warranty on the AX-MAZCAM?

Axxess offers a 1-year limited warranty from the date of purchase against manufacturing defects.

Can I return the kit if it doesn't fit my car?

Check the return policy of your retailer. Axxess recommends verifying compatibility before purchase using their online fit guide.

USER MANUAL AX-MAZCAM Axxess

Installation Instructions for AX-MAZCAM

AX-MAZCAM Mazda Back-Up Camera Retain/Add-On 2007-2015

FEATURES

• Retains the factory back-up camera to an aftermarket radio
• Allows an aftermarket camera to be added to the factory screen

INTERFACE COMPONENTS

- AX-MAZCAM harness

APPLICATIONS

MAZDA
CX-5	2013-2015
CX-7	2007-2012
CX-9	2007-2015
Mazda6	2011-2015

TOOLS REQUIRED

• Cutting tool • Tape • Crimping tool

- Connectors (example: butt connectors, bell caps, etc.)

CAUTION! Metra recommends disconnecting the negative battery terminal before beginning any installation, unless the vehicle manufacturer recommends against so. Please check with your local Dealership for more information. All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before reconnecting the battery or cycling the ignition. Also, do not remove the factory radio with the key in the on position, or the vehicle running. It would be best to remove the key from the ignition and then wait a few seconds before removing the factory radio.

Axxess Integrate axxessinterfaces.com • metraonline.com

REV. 1/25/16

© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION

Installation Instructions for AX-MAZCAM

Connections to be made

The AX-MAZCAM can be connected two different ways

To retain the factory back-up camera to an aftermarket radio:

• Connect the Black wire to chassis ground.
• Connect the Yellow wire to accessory power.
• Connect the male Yellow RCA jack to the rear camera input of the aftermarket radio.
• Connect the reverse wire from the aftermarket radio, to the reverse signal in the vehicle.

To allow an aftermarket camera to be added to the OEM screen:

• Connect the Black wire to the ground wire of the aftermarket camera.
• Connect the Yellow wire to battery wire of the aftermarket camera.
• Connect the female Yellow RCA jack to the aftermarket camera.

KNOWLEDGE IS POWER

Enhance your institution and registration mark by enrolling in the most recognized and respected

mobile electronics advertising our industry.

Log onto www.1staforeinstitute.com or mail 660-364-6756 for more information and take steps.

toward a better temperature.

Metra recommends MECP certified Artificial

certimed technicians

Axxess Integrate axxessinterfaces.com • metraonline.com

REV. 1/25/16

© COPYRIGHT 2004-2016 METRA ELECTRONICS CORPORATION

AX-MAZCAM