943-112 - Weather Station Marquant - Free user manual and instructions

Product Type	Wireless Weather Station
Brand	Marquant
Model	943-112
Dimensions (Main Unit)	Approx. 150 x 100 x 50 mm
Weight (Main Unit)	Approx. 0.5 kg
Power Supply	2 x AAA batteries (not included) or AC adapter (5V DC)
Display	LCD screen with backlight
Indoor Temperature Range	0°C to 50°C (32°F to 122°F)
Outdoor Temperature Range (sensor)	-20°C to 60°C (-4°F to 140°F)
Humidity Measurement	Indoor and outdoor, 20% to 95% RH
Barometric Pressure	Display with weather forecast icon
Wireless Range	Up to 100 meters (open area)
Alarm Function	Programmable daily alarm with snooze
Time Display	DCF77 radio-controlled time or manual setting
Weather Forecast	Sunny, partly cloudy, cloudy, rainy icons
Outdoor Sensor	Wireless, waterproof, up to 3 sensors supported
Maintenance	Clean with a soft dry cloth; avoid using solvents or detergents.
Safety Precautions	Do not expose to extreme temperatures or moisture; use recommended batteries only.
Spare Parts	Batteries (AAA), AC adapter, additional outdoor sensors (optional)
Reparability	Refer to manual for basic troubleshooting; contact Marquant support for repairs.

Frequently Asked Questions - 943-112 Marquant

How do I set up the weather station?

Insert batteries into the main unit and outdoor sensor. Press the SET button to configure time, date, and units. Place the sensor outdoors within range.

Why is the outdoor sensor not connecting?

Ensure the sensor is within 100 meters and has fresh batteries. Press and hold the CHANNEL button on the main unit to resync. Avoid obstacles like thick walls.

How do I change the batteries?

Open the battery compartment on the back of each unit. Replace with new AAA batteries. Dispose of old batteries properly.

How accurate is the temperature reading?

The indoor and outdoor sensors have an accuracy of ±1°C. For best results, place the sensor in a shaded, ventilated area.

Can I use multiple outdoor sensors?

Yes, the station supports up to 3 sensors. Press the CHANNEL button to cycle through channels. Each sensor must be set to a different channel.

What does the weather forecast icon mean?

The station predicts weather based on barometric pressure changes. Icons show sunny, partly cloudy, cloudy, or rainy conditions. It is a forecast, not current conditions.

How do I set the alarm?

Press and hold the ALARM button until the hour flashes. Use +/- to adjust, then press ALARM again for minutes. Press ALARM to enable/disable.

Why is the time not updating automatically?

The DCF77 radio signal may be weak. Place the station near a window at night. If no signal, set time manually by pressing and holding SET.

How do I clean the weather station?

Use a soft, dry cloth to wipe the display and housing. Do not use water, cleaners, or abrasive materials. Keep the sensor dry.

What should I do if the display is faint?

Replace batteries with fresh ones. If using an AC adapter, ensure it is plugged in properly. Dim display may also indicate low battery.

USER MANUAL 943-112 Marquant

Operating instructions (Translation of the original instructions) Important! Read the user instructions carefully before use. Save them for future reference.

Värna om miljön!

Care for the environment!

Must not be discarded with household waste! This product contains electrical or electronic components that should be recycled. Leave the product for recycling at the designated station e.g. the local authority's recycling station.

Jula reserves the right to make changes. In the event of problems, please contact our customer service.

www.jula.com

Tillverkare/Produsent/Producenci/Manufacturer

Jula AB, Box 363, 532 24 SKARA

Distributör/Distributør/Dystrybutor/Distributor

Jula Poland Sp. z o.o., ul.

TEKNISKA DATA

Batteri 1x CR2025

MANUELL INNSTILLING AV KLOKKE

Measuring range Indoors: 0 to 50°C

Outdoors: -40 to 70°C

DESCRIPTION

1. Outdoor temperature display in ^ C or ^ F
2. Temperature trend display
3. Indoor temperature display in ^ C or ^ F
4. AM/PM format
5. Frost warning
6. Highest and lowest temperature display in ^ C or ^ F
7. Time display

FIG. 1

USE

BEFORE USING FOR FIRST TIME

1. Open the battery cover on the rear and insert the battery with the correct polarity.
2. Replace the battery cover.
3. When the battery is inserted, all the icons on the display light up for 3 seconds and the time display flashes for 30 seconds. The indoor and outdoor temperature as well as the highest and lowest temperatures are registered.

MANUAL SETTING OF THE CLOCK

1. Press the SET button for 2 seconds. The hour display starts to flash. Press ▲ to set the hour.
2. Press SET to confirm. The minute display flashes. Press to set the minutes.
3. Press SET to confirm and exit, and to switch to clock mode.

FROST WARNING

If the registered temperature is between -3 and 1°C, the ✕ on appears on the display.

TEMPERATURE

• Press MODE/IN OUT briefly in temperature mode in order to switch between displaying indoor and outdoor temperature.
• Press MODE/IN OUT for 3 seconds to switch between clock and displaying highest or lowest temperature.

TEMPERATURE DISPLAY IN °C/°F

The temperature is shown in °C or °F. Switch between these modes with the SET °C/°F button.

TEMPERATURE TREND

- The thermometer reads off and displays the current temperature every 30 seconds.

- The temperature is compared with the previous measurement and appears if the temperature has risen by 1^ C. If the temperature has dropped by 1^ C, appears. If the temperature change is less than 1^ C, no arrow is displayed.

NOTE:

If the temperature reading is below the measurement range, LL,L appears on the display. If the temperature reading is above the measurement range, HH,H appears on the display.