MI-X180 Retro Heritage - Pregnant AIWA - Free user manual and instructions
Find the device manual for free MI-X180 Retro Heritage AIWA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Bluetooth Speaker |
| Model | MI-X180 Retro Heritage |
| Dimensions (W x H x D) | Approx. 200 x 120 x 100 mm |
| Weight | Approx. 0.8 kg |
| Power Source | Built-in Li-ion battery (1800 mAh), USB-C charging |
| Battery Life | Up to 6 hours at moderate volume |
| Charging Time | Approx. 3 hours |
| Connectivity | Bluetooth 5.0, AUX 3.5mm, USB port for music playback |
| Supported Audio Formats | MP3, WMA, WAV, FLAC |
| Radio | FM radio with built-in antenna |
| Speaker Output | 10W (RMS) |
| Frequency Response | 80Hz - 18kHz |
| Controls | Buttons for power, volume, playback, EQ, radio presets |
| Care and Cleaning | Wipe with a soft, dry cloth. Avoid liquids and abrasives. |
| Safety | Do not expose to extreme temperatures or moisture. |
| Spare Parts / Repairability | Battery and charging port replaceable by qualified technician. |
| Warranty | 12 months from date of purchase |
Frequently Asked Questions - MI-X180 Retro Heritage AIWA
How do I pair the speaker with Bluetooth?
Turn on the speaker and activate Bluetooth on your device. Search for AIWA MI-X180 and select it. The speaker will confirm with a tone.
What is the battery life?
The battery lasts up to 6 hours at moderate volume. Actual life may vary with volume level and audio content.
Can I use the speaker while charging?
Yes, you can use the speaker while it is charging via USB-C. However, this may extend the charging time.
How do I listen to FM radio?
Press the Mode button until FM radio is selected. Use the +/- buttons to scan stations. For best reception, extend the antenna wire if available.
What audio sources are supported?
Bluetooth, AUX 3.5mm input, USB drive (MP3/WMA/WAV/FLAC), and FM radio.
How do I reset the speaker?
If the speaker is unresponsive, press and hold the Power button for 8 seconds until it turns off, then turn it on again.
Can I connect two speakers wirelessly?
No, the MI-X180 does not support multi-speaker pairing. It is designed for single speaker use.
How do I clean the speaker?
Unplug the speaker and wipe the exterior with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners.
Is the speaker waterproof?
No, the speaker is not waterproof. Keep it away from water and moisture to avoid damage.
Where can I get replacement parts?
Contact AIWA customer support or an authorized service center for spare parts such as the battery or charging port.
User questions about MI-X180 Retro Heritage AIWA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual MI-X180 Retro Heritage - AIWA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MI-X180 Retro Heritage by AIWA.
