Q: What is the storage capacity of the KENMORE 253.17502 freezer?

The KENMORE 253.17502 freezer has a total storage capacity of 300 liters , making it a standard-sized appliance for home use. In addition to the volume, here are the dimensions and freezing characteristics to know: Dimensions: 180 cm height, 60 cm width, 70 cm depth Net weight: 70 kg Freezing temperature: -18 °C Freezing capacity: 12 kg per 24 hours Autonomy: 15 hours in case of power outage This capacity allows you to freeze and store food for an entire family for several months.

Q: What are the dimensions of the KENMORE 790.80354 microwave?

Dimensions of the KENMORE 790.80354 microwave: Width: 20.5 inches (52 cm) Depth: 17.3 inches (44 cm) Height: 12.2 inches (31 cm) These dimensions include the outer casing of the appliance. Make sure you have sufficient counter or cabinet space before installation.

Q: What should I do if the Normal Wash cycle is stuck on my Kenmore 665.12413 dishwasher?

If your Kenmore 665.12413 dishwasher is stuck on the Normal Wash cycle with the Heated Dry option active, here’s how to reset the control panel: Preliminary Checks Make sure the door is properly closed and locked . A poorly locked door can block the cycle. Check that the Control Lock is disabled . If the lock is activated, the appliance will not respond to the buttons. How to Disable the Control Lock Press the SANI RINSE button for 3 seconds to toggle the control lock on/off. Press the HIGH TEMP button for 3 seconds to emit a beep and confirm the operation. If the cycle remains stuck Once the Control Lock is disabled, press the START/RESUME button to restart or resume the cycle. If the problem persists, press START/RESUME to cancel the current cycle, then select a new program. If the Normal Wash cycle remains consistently stuck, check inside the appliance - a large item may be interfering with the sensors or the door latch mechanism.

Q: Can I use this vacuum cleaner to clean sanding dust?

No, it is not recommended. The KENMORE DU5092 is not designed to vacuum sanding dust or fine powders. According to the manual, the device contains an explicit warning: "Always clean the dust bin after vacuuming carpet cleaners, deodorizers, powders, and fine dusts." These very fine materials quickly clog the preliminary filters, foam, and felt, which drastically reduces suction and risks permanently damaging the device. Why this is problematic: Sanding dust is extremely fine and easily penetrates the filtration system It clogs the foam/felt filters (which should normally be cleaned every 3 months) much more quickly A blockage of the filters overloads the motor and reduces the lifespan of the device Even the HEPA filter can be damaged To vacuum sanding dust: opt for a specialized vacuum cleaner such as a shop vac or a vacuum cleaner with enhanced HEPA filtration. Ideally, use a collection system directly on your sanding tool.

Question 1

What is the storage capacity of the KENMORE 253.17502 freezer?

Accepted Answer

The KENMORE 253.17502 freezer has a total storage capacity of 300 liters, making it a standard-sized appliance for home use.

In addition to the volume, here are the dimensions and freezing characteristics to know:

Dimensions: 180 cm height, 60 cm width, 70 cm depth
Net weight: 70 kg
Freezing temperature: -18 °C
Freezing capacity: 12 kg per 24 hours
Autonomy: 15 hours in case of power outage

This capacity allows you to freeze and store food for an entire family for several months.

Question 2

How to detach the rod from the PowerMate?

Accepted Answer

To detach the rod from the KENMORE BC3005 PowerMate, follow these steps:

Make sure the vacuum is positioned vertically (rod locked in the upright position)
Press the rod release pedal with your foot (located at the base of the PowerMate)
Pull the rod upwards to completely detach it

The rod separates easily once the release pedal is activated. You can also detach the handle from the rod by pressing the rod release button located on the handle if you wish to separate them.

Question 3

What are the dimensions of the KENMORE 790.80354 microwave?

Accepted Answer

Dimensions of the KENMORE 790.80354 microwave:

Width: 20.5 inches (52 cm)
Depth: 17.3 inches (44 cm)
Height: 12.2 inches (31 cm)

These dimensions include the outer casing of the appliance. Make sure you have sufficient counter or cabinet space before installation.

Question 4

What is the part number for the replacement HEPA filter for the KENMORE HF5010?

Accepted Answer

Yes, 741001102 is the correct part number for the HEPA filter for your KENMORE HF5010 vacuum cleaner.

This washable HEPA filter comes with the water tank of your device and can be cleaned and reused rather than being replaced systematically.

When to clean the filter:

When the filter is visibly dirty or clogged
If suction noticeably decreases
It is not necessary to clean it after every use

How to maintain the filter:

Remove the HEPA filter from the water tank lid
Wash it with clear water if necessary
Let it dry completely in the air before putting it back in place

Question 5

How can I obtain a copy of the owner’s manual for the Kenmore 665.12413 dishwasher?

Accepted Answer

You already have access to the full manual

The owner’s manual for your KENMORE 665.12413 dishwasher is currently displayed on this page in an interactive PDF reader. You don’t need to look elsewhere.

How to view and download the manual

Online viewing: Use the PDF reader controls (scroll, previous/next buttons) to navigate through the 72 pages of the manual
Search in the PDF: The reader's search function allows you to quickly find specific topics (e.g., SmartWash® programs, Ultra Wash® filtering, troubleshooting)
Download: Click on the download icon in the PDF reader toolbar to save a complete copy of the manual to your computer
Printing: Click on the print icon to print the manual on paper

Main sections of the manual

The manual covers essential points: initial setup with Ultra Wash® filters, loading instructions for the baskets, 6 wash programs (SmartWash® HE, Pots & Pans, Normal Wash, China Gentle, 1 Hour Wash, Quick Rinse), filter maintenance, and troubleshooting solutions.

Question 6

What should I do if the Normal Wash cycle is stuck on my Kenmore 665.12413 dishwasher?

Accepted Answer

If your Kenmore 665.12413 dishwasher is stuck on the Normal Wash cycle with the Heated Dry option active, here’s how to reset the control panel:

Preliminary Checks

Make sure the door is properly closed and locked. A poorly locked door can block the cycle.
Check that the Control Lock is disabled. If the lock is activated, the appliance will not respond to the buttons.

How to Disable the Control Lock

Press the SANI RINSE button for 3 seconds to toggle the control lock on/off.
Press the HIGH TEMP button for 3 seconds to emit a beep and confirm the operation.

If the cycle remains stuck

Once the Control Lock is disabled, press the START/RESUME button to restart or resume the cycle. If the problem persists, press START/RESUME to cancel the current cycle, then select a new program.

If the Normal Wash cycle remains consistently stuck, check inside the appliance - a large item may be interfering with the sensors or the door latch mechanism.

Question 7

Can I use this vacuum cleaner to clean sanding dust?

Accepted Answer

No, it is not recommended. The KENMORE DU5092 is not designed to vacuum sanding dust or fine powders.

According to the manual, the device contains an explicit warning: "Always clean the dust bin after vacuuming carpet cleaners, deodorizers, powders, and fine dusts." These very fine materials quickly clog the preliminary filters, foam, and felt, which drastically reduces suction and risks permanently damaging the device.

Why this is problematic:

Sanding dust is extremely fine and easily penetrates the filtration system
It clogs the foam/felt filters (which should normally be cleaned every 3 months) much more quickly
A blockage of the filters overloads the motor and reduces the lifespan of the device
Even the HEPA filter can be damaged

To vacuum sanding dust: opt for a specialized vacuum cleaner such as a shop vac or a vacuum cleaner with enhanced HEPA filtration. Ideally, use a collection system directly on your sanding tool.

Question 8

How to purchase a replacement foam filter for the Kenmore BU3040 vacuum cleaner?

Accepted Answer

The replacement foam filter for your Kenmore BU3040 is referenced as 561060125 (valid in the United States and Canada).

To order this filter, please contact Kenmore customer service:

United States: 1-877-531-7321
Canada: 1-844-608-3081

You can also opt for the complete filter kit (reference 561060184), which includes both the foam filter and the HEPA filter, for complete maintenance of your vacuum cleaner.

Between filter orders, remember that the foam filter can be washed with warm soapy water and must dry completely in the air for 24 hours before reinstalling.

User manual KENMORE : user manuals and guides in PDF

Models KENMORE most viewed

Browse manuals KENMORE by appliance type

Recent questions about devices KENMORE