Q: What does "continuous driving time" mean on the 70mai A510 Dash Cam?

"Continuous driving time" refers to the duration during which the camera records without interruption while the vehicle is in motion . On the 70mai A510 Dash Cam, this function is central to the device's operation: as long as you are driving and the vehicle is powered, the camera records continuously. The 70mai A510 is designed to be permanently powered via the vehicle's cigarette lighter (5V/2A). This external power supply allows the camera to film continuously for the entire duration of your trip, without battery life limitations. Therefore, there is no recording duration restriction as long as the vehicle remains connected to this power source. The device has an internal battery of 500 mAh in Li-ion technology , which is non-removable . This battery does not serve to power continuous recording while driving, but rather as a backup battery . It kicks in during power outages or in parking mode, allowing the camera to record a few extra minutes after a power loss. In summary, "continuous driving time" is not a limitation on your camera, but a description of its normal operating mode: as long as your vehicle is running and the camera remains connected to the cigarette lighter, it records indefinitely. Recording automatically stops when the engine is turned off and resumes as soon as you restart the vehicle.

Q: What is the firmware of the 70mai Dash Cam A510 and how to check its version?

The firmware of the 70mai Dash Cam A510 is the internal system software that controls the complete operation of the device. It manages all recording features, video processing with the Sony IMX307 sensor, motion detection, parking mode, built-in GPS geolocation, and compatibility with the 70mai mobile app. Firmware updates fix bugs, improve recording stability, optimize performance, and may add new features to your dashcam. How to check the firmware version on your 70mai A510: Download and launch the 70mai mobile app (available on the App Store and Google Play) Connect your phone to the camera's Wi-Fi network (the dashcam automatically creates a built-in Wi-Fi hotspot) Open the app menu (menu icon at the top right) Go to the Firmware Update settings The current firmware version will be displayed here, along with a notification if an update is available (small red dot) Firmware update: If an update is available in the 70mai app, it will be done directly via Wi-Fi. You can also download the update file from the official 70mai website (help@70mai.com or www.70mai.com), save it to your microSD memory card, and the camera will detect and install the update automatically on the next startup. System settings: You can also access the general system settings of the A510 camera by pressing the function button under the settings icon on the dashcam's touchscreen, where you can modify time, language, and other essential settings. Requirements: Android 5.0 or iOS 11.0 or higher is required to connect the mobile app to the camera's Wi-Fi network. Keeping your firmware up to date ensures stable recording, optimal performance, and access to the latest security features of your 70mai Dash Cam A510.

Q: How to format the SD card of the 70mai A510 Dash Cam on a computer?

Important: The manufacturer 70mai strongly recommends formatting the SD card directly in the A510 Dash Cam before first use. Go to the Settings menu, select the Card Formatting option, and confirm. This method ensures the best compatibility. If you absolutely need to format the card on a computer before insertion, here is the procedure. First, ensure that your microSD card is compatible: capacity between 32 GB and 256 GB, class 10 minimum with U1 speed or higher. On Windows: Insert the SD card into a card reader (or USB adapter). Open File Explorer, locate your SD card, then right-click on it and select Format . For a card of 32 GB or less, choose FAT32 ; for 64 GB or more, select exFAT . Check the Quick Format box and click Start . On Mac: Insert the SD card into a reader or via USB adapter. Open Disk Utility (Applications > Utilities > Disk Utility), select your SD card in the left pane, then click the Erase button at the top. Choose exFAT as the format (this format works on all systems), name the card if you wish, and confirm by clicking Erase . Warning: Formatting deletes all files on the card. Make a backup before proceeding. After formatting via computer, reinsert the card into the A510 Dash Cam and format it again in the device via the Settings menu to ensure optimal compatibility.

Question 1

How to connect the 70mai A510 dash cam to the mobile app?

Accepted Answer

To connect your 70mai A510 dash cam to the mobile app, you need a smartphone with Android 5.0 or iOS 11.0 minimum. Download the official 70mai app by searching for it in the Google Play Store (Android) or the App Store (iOS), or by scanning the QR code provided in the manual.

Turn on the 70mai A510 dash cam and access its settings. Enable the 2.4GHz Wi-Fi function (the camera is compatible with IEEE 802.11 b/g/n). The camera will display a network name (SSID) starting with 70mai_ followed by a series of numbers, as well as an access password.

On your smartphone, open the Wi-Fi settings and look for the network corresponding to your camera (70mai_XXXX). Select this network and enter the password displayed on the dash cam screen to establish the connection.

Then launch the 70mai app and select the option to add a new device. The app will automatically detect your camera and complete the pairing. Once connected, you will be able to view videos, modify settings, activate parking mode with motion detection, and update the firmware directly from the app.

If the connection fails, ensure that the 2.4GHz Wi-Fi is enabled on the camera and that you are connected to the correct network. If the problem persists, restart both devices, clear the cache of the 70mai app, or reinstall it to reset the connection.

Question 2

How to set the date on the 70mai A510 Dash Cam?

Accepted Answer

To set the date on your 70mai A510 Dash Cam, follow these simple steps:

Steps to set the date

Turn on the Dash Cam: Make sure the device is powered on.
Access the main menu: Press the Menu button or the corresponding icon on the touchscreen.
Open settings: Navigate through the menu to select Settings or Preferences.
Select the Date and Time option: This section allows you to adjust the date and time of the device.
Set the date: Change the day, month, and year using the on-screen controls (buttons or touch).
Confirm the changes: Validate the settings to save the new date.
Exit the menu: Return to the main screen to resume normal use of the Dash Cam.

Note that the date is important for the video recordings to be correctly timestamped, making it easier to review them later.

Question 3

What does "continuous driving time" mean on the 70mai A510 Dash Cam?

Accepted Answer

"Continuous driving time" refers to the duration during which the camera records without interruption while the vehicle is in motion. On the 70mai A510 Dash Cam, this function is central to the device's operation: as long as you are driving and the vehicle is powered, the camera records continuously.

The 70mai A510 is designed to be permanently powered via the vehicle's cigarette lighter (5V/2A). This external power supply allows the camera to film continuously for the entire duration of your trip, without battery life limitations. Therefore, there is no recording duration restriction as long as the vehicle remains connected to this power source.

The device has an internal battery of 500 mAh in Li-ion technology, which is non-removable. This battery does not serve to power continuous recording while driving, but rather as a backup battery. It kicks in during power outages or in parking mode, allowing the camera to record a few extra minutes after a power loss.

In summary, "continuous driving time" is not a limitation on your camera, but a description of its normal operating mode: as long as your vehicle is running and the camera remains connected to the cigarette lighter, it records indefinitely. Recording automatically stops when the engine is turned off and resumes as soon as you restart the vehicle.

Question 4

What is the firmware of the 70mai Dash Cam A510 and how to check its version?

Accepted Answer

The firmware of the 70mai Dash Cam A510 is the internal system software that controls the complete operation of the device. It manages all recording features, video processing with the Sony IMX307 sensor, motion detection, parking mode, built-in GPS geolocation, and compatibility with the 70mai mobile app. Firmware updates fix bugs, improve recording stability, optimize performance, and may add new features to your dashcam.

How to check the firmware version on your 70mai A510:

Download and launch the 70mai mobile app (available on the App Store and Google Play)
Connect your phone to the camera's Wi-Fi network (the dashcam automatically creates a built-in Wi-Fi hotspot)
Open the app menu (menu icon at the top right)
Go to the Firmware Update settings
The current firmware version will be displayed here, along with a notification if an update is available (small red dot)

Firmware update: If an update is available in the 70mai app, it will be done directly via Wi-Fi. You can also download the update file from the official 70mai website (help@70mai.com or www.70mai.com), save it to your microSD memory card, and the camera will detect and install the update automatically on the next startup.

System settings: You can also access the general system settings of the A510 camera by pressing the function button under the settings icon on the dashcam's touchscreen, where you can modify time, language, and other essential settings.

Requirements: Android 5.0 or iOS 11.0 or higher is required to connect the mobile app to the camera's Wi-Fi network. Keeping your firmware up to date ensures stable recording, optimal performance, and access to the latest security features of your 70mai Dash Cam A510.

Question 5

How to format an SD card directly on the 70mai A510 Dash Cam?

Accepted Answer

To format an SD card directly on your 70mai A510 Dash Cam, follow these simple steps:

Turn on the Dash Cam by pressing the power button.
Access the main menu by touching the screen or pressing the "Menu" button depending on the model.
Navigate to settings (often labeled "Settings" or "Paramètres").
Find the formatting option, usually under a submenu like "Storage" or "SD Card".
Select "Format" or "Format SD Card" and confirm your choice when the camera prompts you.
Wait while the camera formats the SD card. This process only takes a few moments.
Once completed, the Dash Cam will indicate that the SD card is ready for use.

Formatting erases all data on the SD card, so make sure to back up your important files before proceeding.

Question 6

How to format the SD card of the 70mai A510 Dash Cam on a computer?

Accepted Answer

Important: The manufacturer 70mai strongly recommends formatting the SD card directly in the A510 Dash Cam before first use. Go to the Settings menu, select the Card Formatting option, and confirm. This method ensures the best compatibility.

If you absolutely need to format the card on a computer before insertion, here is the procedure. First, ensure that your microSD card is compatible: capacity between 32 GB and 256 GB, class 10 minimum with U1 speed or higher.

On Windows: Insert the SD card into a card reader (or USB adapter). Open File Explorer, locate your SD card, then right-click on it and select Format. For a card of 32 GB or less, choose FAT32; for 64 GB or more, select exFAT. Check the Quick Format box and click Start.

On Mac: Insert the SD card into a reader or via USB adapter. Open Disk Utility (Applications > Utilities > Disk Utility), select your SD card in the left pane, then click the Erase button at the top. Choose exFAT as the format (this format works on all systems), name the card if you wish, and confirm by clicking Erase.

Warning: Formatting deletes all files on the card. Make a backup before proceeding. After formatting via computer, reinsert the card into the A510 Dash Cam and format it again in the device via the Settings menu to ensure optimal compatibility.

Question 7

How to protect the external battery of the Dash Cam 70mai A510 from heat and sunlight in the car?

Accepted Answer

Protecting the external battery of your Dash Cam 70mai A510 from heat and sun exposure in your car is essential to preserve its lifespan and performance. Here are some practical tips:

1. Choose a shaded location

Avoid leaving the battery on the dashboard or near windows where it will be directly exposed to sunlight. Prefer a shaded location, such as under a seat or in the trunk.

2. Use thermal insulation

Wrap the battery in an insulating cover or a thermal bag designed to protect against heat. This helps limit the impact of high temperatures.

3. Install a sunshade

Place a sunshade on the windshield when parking your car in the sun. This reduces the interior temperature and protects sensitive equipment.

4. Promote ventilation

If possible, leave a window slightly open to allow air circulation and prevent excessive heat buildup. However, ensure that this does not compromise the vehicle's security.

5. Remove the battery in case of prolonged high heat

If you plan to leave your car parked for a long time in very hot weather, it is best to remove the battery and store it in a cool, dry place.

By following these tips, you will help maintain the performance and longevity of the external battery of your Dash Cam 70mai A510, even under high heat conditions.

Question 8

How to use and configure the rear camera with the 70mai A510 Dash Cam?

Accepted Answer

The 70mai A510 Dash Cam can be connected to a compatible rear camera to provide an additional view of the back of the vehicle. Here’s how to use and configure this rear camera:

1. Installation and connection of the rear camera

Make sure the rear camera is properly connected to the Dash Cam via the supplied cable. Check that the connectors are well inserted to avoid false contacts.
Position the rear camera at the back of your vehicle, ideally in the center and at a height that allows good visibility without obstruction.

2. Configuration in the Dash Cam settings

Turn on the Dash Cam and access the settings menu.
Activate the rear camera function if it is not already activated.
Ensure that the Dash Cam can switch automatically or manually between the front and rear view according to your needs.

3. Video recording

Make sure that video recording is enabled for the rear camera so that footage is saved while driving.
The videos from the rear camera will generally be recorded at the same time as those from the front camera, allowing you to view both angles.

4. Practical tips

Regularly clean the lens of the rear camera to ensure a clear image.
Test the camera after installation to check the image quality and proper functioning.
If you encounter connection or display issues, check the cables and restart the Dash Cam.

By following these steps, you will be able to fully enjoy the rear camera functionality of your 70mai A510 Dash Cam for better safety and visibility while driving.

Question 9

Do I need to activate Bluetooth to view videos on the 70mai A510 Dash Cam?

Accepted Answer

No, it is not necessary to activate Bluetooth to view the recorded videos on the 70mai A510 Dash Cam. Bluetooth does not play a role in accessing your recordings. The dash cam exclusively uses Wi-Fi to communicate with the 70mai mobile app.

To view your videos via the 70mai app, connect your smartphone to the 2.4GHz Wi-Fi network emitted by the dash cam. Once connected, open the 70mai app and you will be able to view, play, and download your video files. This method only requires that Wi-Fi is enabled on your phone and on the dash cam - Bluetooth is not required.

You also have the option to view the videos by removing the microSD card from the dash cam (supported capacity: 32 to 256 GB, class 10, U1 or higher) and inserting it into a compatible card reader connected to your computer or another device. This method does not require any wireless connection.

If your phone prompts you to activate Bluetooth when connecting to the dash cam, check that you have correctly selected the camera's Wi-Fi network in your device's Wi-Fi settings. Also, ensure that your phone has at least Android 5.0 or iOS 11.0 to establish the Wi-Fi connection with the dash cam.

Question 10

Does the 70mai A510 dash cam record when the car is parked?

Accepted Answer

Yes, the 70mai A510 dash cam can record when the car is parked, thanks to its parking surveillance mode. Here are the important points to know:

Recording in parking mode

The parking mode allows the camera to remain active even when the engine is off.
It uses motion detection or a shock sensor to trigger recording if an event is detected around the vehicle.

Necessary conditions

The camera must be powered continuously, either via a dedicated power cable or a parking wiring kit.
This mode must be activated in the dash cam settings.

Parameter customization

You can adjust the sensitivity of the motion detection to avoid unnecessary recordings.
It is also possible to completely disable the parking mode if you do not want the camera to record when the car is parked.

In summary, if the function is activated and the camera is properly powered, the 70mai A510 will automatically record in case of detected movement or shock while parked.

User manual 70mai : user manuals and guides in PDF

Models 70mai most viewed

Browse manuals 70mai by appliance type

Recent questions about devices 70mai