Q: How to set the sunrise simulator on the WE clock radio?

The WE Light Wake-Up Clock features a progressive sunrise simulation that lasts 30 minutes before your set wake-up time. This function activates automatically and gradually increases the light intensity in a gentle and natural way. To set the sunrise simulator, start by plugging in the included USB-C cable into a power outlet. Also, install two AAA batteries in the compartment located at the back to save your settings in case of a power outage. Next, first set the current time : press the clock button located at the back of the device, then use the up and down buttons to adjust the hours and minutes. Confirm by pressing the clock button again. This step is mandatory each time the power cable is plugged in. To set the wake-up time , press and hold the alarm button located at the back for 3 seconds . The wake-up time will start blinking on the screen. Adjust the hours and minutes with the up and down buttons, then confirm. An alarm icon will appear on the display to indicate that the function is activated. The sunrise simulator works continuously: 30 minutes before your wake-up time, the light will gradually turn on and the intensity will increase gradually up to 100%, simulating a natural sunrise. At the exact alarm time, the sound you have chosen (from 6 natural sounds or FM radio) will play for 2 minutes. You can customize the maximum light intensity: press the up and down buttons to set a level between 10% and 100% according to your preference. If you want to completely turn off the wake-up light without stopping the sound alarm, press and hold the brightness button. To completely stop the alarm, press any button except the snooze button, which will restart the alarm in 5 minutes.

Question 1

How to set the sunrise simulator on the WE clock radio?

Accepted Answer

The WE Light Wake-Up Clock features a progressive sunrise simulation that lasts 30 minutes before your set wake-up time. This function activates automatically and gradually increases the light intensity in a gentle and natural way.

To set the sunrise simulator, start by plugging in the included USB-C cable into a power outlet. Also, install two AAA batteries in the compartment located at the back to save your settings in case of a power outage.

Next, first set the current time: press the clock button located at the back of the device, then use the up and down buttons to adjust the hours and minutes. Confirm by pressing the clock button again. This step is mandatory each time the power cable is plugged in.

To set the wake-up time, press and hold the alarm button located at the back for 3 seconds. The wake-up time will start blinking on the screen. Adjust the hours and minutes with the up and down buttons, then confirm. An alarm icon will appear on the display to indicate that the function is activated.

The sunrise simulator works continuously: 30 minutes before your wake-up time, the light will gradually turn on and the intensity will increase gradually up to 100%, simulating a natural sunrise. At the exact alarm time, the sound you have chosen (from 6 natural sounds or FM radio) will play for 2 minutes. You can customize the maximum light intensity: press the up and down buttons to set a level between 10% and 100% according to your preference.

If you want to completely turn off the wake-up light without stopping the sound alarm, press and hold the brightness button. To completely stop the alarm, press any button except the snooze button, which will restart the alarm in 5 minutes.

Question 2

How do I set the sunset function on the WE sunrise simulator?

Accepted Answer

The sunset function (sunset) of the WE sunrise simulator allows you to program a gradual dimming light for 30 minutes before the time you have set, creating an atmosphere conducive to natural falling asleep.

Activating the sunset mode: Press the sunset button (identifiable by the icon of the setting sun) located on the case of the alarm clock. An indicator will appear or disappear on the digital screen to confirm that the mode is activated or deactivated.

Setting the sunset time: Hold the sunset button for 3 seconds. The time indication will start to blink on the display. Use the navigation buttons (up and down) located at the back of the device to set the desired hour and minutes. Once the setting is done, press the confirmation button to validate the time.

Operation of the simulation: 30 minutes before the programmed time, the lighting of your WE automatically activates at 100% brightness, regardless of the mode used. The light then gradually dims until it completely turns off at the exact time you have set. This gentle 30-minute progression promotes natural falling asleep by simulating the natural sunset.

Important points: The sunset function operates independently of the alarm. You can use it alone to create a relaxing atmosphere before bedtime, or combine it with other functions. The light intensity of your WE sunrise simulator varies from 10% to 100%, and during the sunset simulation, it always starts at 100% before gradually reducing.

User manual WE : user manuals and guides in PDF

Models WE most viewed

Browse manuals WE by appliance type

Recent questions about devices WE