Question 1

How to connect a screen to the LEICA DM2500 LED microscope?

Accepted Answer

The LEICA DM2500 microscope does not have a direct video output. To view the image on an external screen, you need to install a compatible digital camera on the microscope, and then connect this camera to your screen.

Required equipment: A trinocular eyepiece (trinocular phototube) must be mounted on the DM2500. The LEICA DM2500 can be equipped with ergonomic trinocular phototubes with 50/50 or 100/100 configurations, which means you can split the image between two observation eyepieces and a camera output. A specialized digital camera for microscopes (not an ordinary webcam) can then be mounted on this camera output.

Connection steps: Install the trinocular eyepiece by securely attaching it to the microscope. Mount the compatible digital camera on the designated adapter of the phototube. Then connect the camera to your screen or computer via the appropriate cable (HDMI, USB-C, DisplayPort depending on the camera model). Turn on the screen and configure it to receive the video signal from the camera.

Settings: Use the remaining eyepieces of the trinocular tube to observe the specimen directly through the microscope. Adjust the focus using the focus buttons on the DM2500. Configure the brightness, contrast, and resolution via the camera software on your computer to optimize the quality of the image displayed on the screen. The Leica Image Organizer software can be used to archive, search, and manage captured images.

Contact Leica or your authorized distributor to find out which models of digital cameras are compatible with your version of the DM2500, as compatibility depends on the installed accessories and the configuration of your microscope.

Question 2

How to prime the Leica ST 5020?

Accepted Answer

Priming the Leica ST 5020 is an essential step to ensure the proper functioning of the device by ensuring that fluids circulate correctly and that no air bubbles disrupt the process. Here’s how to proceed:

Steps to prime the Leica ST 5020

Device preparation: Make sure the device is clean and that all necessary components are in place.
Checking fluid levels: Ensure that the reservoirs containing the inclusion media or other reagents are filled to the recommended levels.
Power on: Turn on the Leica ST 5020 and allow it to fully initialize.
Accessing the priming function: Navigate through the device menu to select the priming option, often indicated by "Prime" or a similar term.
Starting the priming: Start the process. The device will then circulate the fluid through the circuits to eliminate air bubbles and ensure a steady flow.
Monitoring: Follow the on-screen instructions during priming to detect any messages or alerts.
Final check: Once priming is complete, visually check that no air bubbles remain in the system. If necessary, repeat the operation.

After these steps, your Leica ST 5020 is ready to be used for your usual procedures.

User manual LEICA : user manuals and guides in PDF

Models LEICA most viewed

Browse manuals LEICA by appliance type

Recent questions about devices LEICA