Q: How do I open the feed door of the Rexel Optimum AutoFeed 45X?

To open the feed door of the REXEL Optimum AutoFeed 45X, simply lift the handle of the lid located on the top of the device. The lid can open up to 90 degrees to facilitate access and insertion of documents to be shredded. This angle allows for better handling and more comfortable loading into the automatic feed tray. Once your documents are loaded, close the door before starting the shredder. The device only starts when the lid is completely closed, for safety reasons.

Question 1

How do I open the feed door of the Rexel Optimum AutoFeed 45X?

Accepted Answer

To open the feed door of the REXEL Optimum AutoFeed 45X, simply lift the handle of the lid located on the top of the device.

The lid can open up to 90 degrees to facilitate access and insertion of documents to be shredded. This angle allows for better handling and more comfortable loading into the automatic feed tray.

Once your documents are loaded, close the door before starting the shredder. The device only starts when the lid is completely closed, for safety reasons.

Question 2

Why does the motor of my REXEL AutoFeed+ 600M shredder run continuously without paper and display a paper jam error when I insert paper?

Accepted Answer

If the motor of your REXEL AutoFeed+ 600M shredder runs continuously as soon as you turn it on, even without paper, and a paper jam error appears when you insert paper, this may indicate a technical problem or malfunction. Here are some suggestions to resolve this issue:

1. Check for obstructions

Ensure that no pieces of paper or foreign objects are blocking the entry or blades of the shredder. Even small fragments can cause a jam and prevent proper operation.

2. Clean the sensors

The AutoFeed+ 600M model uses sensors to detect the presence of paper. If these sensors are dirty or faulty, they may misinterpret the situation and cause the motor to run continuously. Gently clean the sensors with a soft, dry cloth.

3. Reset the device

Unplug the shredder for at least 5 minutes to reset its electronic system, then plug it back in and test again.

4. Check the paper used

Use standard paper and avoid sheets that are too thick, laminated, or crumpled, as these can cause jams.

5. Mode and settings

Check that the shredder is properly set to AutoFeed mode and that the settings correspond to the type of paper you wish to shred.

If after these checks the problem persists, it is possible that an internal component is faulty, requiring specialized technical intervention.

Question 3

What does the circular symbol with a lightning bolt on the Rexel Auto+ 750M shredder mean?

Accepted Answer

The circular symbol with a lightning bolt that you see on the Rexel Auto+ 750M shredder is the standardized electrical hazard symbol (or high voltage). This pictogram warns users of the presence of electricity and the potential risk of electric shock if safety instructions are not followed.

The Rexel Auto+ 750M operates at 230V / 50Hz with a power of 460 watts. This symbol reminds that the device contains live electrical components, including in internal areas, and that it is dangerous to touch certain parts of the device when it is plugged in.

Essential safety instructions related to this symbol:

Never plug in the device if there are signs of damage to the power cord or plug.
Always unplug the device from the power outlet before performing maintenance, cleaning, or moving the shredder.
Do not use the shredder near water or in a damp environment.
Never modify the power plug - it is configured for a specific electrical supply.
Do not overload electrical outlets beyond their capacity - this can cause a fire or electric shock.
Never put your hand inside the device when it is powered on.
Place the device near an easily accessible power outlet so that no one can trip over the cord.

This warning symbol is present for your protection. By following these basic precautions, you will use your Rexel Auto+ 750M shredder safely and effectively.

User manual REXEL : user manuals and guides in PDF

Models REXEL most viewed

Browse manuals REXEL by appliance type

Recent questions about devices REXEL