Q: How do I disassemble the switch of the Spit AC1630P vacuum cleaner?

Disassembling the switch of the Spit AC1630P vacuum cleaner is a delicate operation that involves the electricity of the device. According to the manufacturer's instructions, repair work should be entrusted exclusively to specialized personnel , such as Spit customer service, as a poorly repaired device poses risks to the user's safety. If you need to access the control panel to check the connections or inspect the rotary switch (positions 0, I, A, AC), here are the preliminary steps: make sure to unplug the vacuum cleaner from the power outlet and let it cool down. Then open the side latches that hold the top cover, and lift the cover. Inside, you will find the switch panel (③) and the rotary switch (④) that control the device. However, completely removing this switch requires disconnecting the electrical wires and dismantling the fasteners, which exposes you to the risk of electric shock or short circuit if you do not have the required skills. Replacement parts for the AC1630P switch must be original Spit and installed by an authorized technician. If your switch is no longer functioning properly (stuck, electrically faulty, or out of the standard positions 0 / I / A / AC), contact Spit customer service or an authorized repairer. For a professional vacuum cleaner of this class, regular maintenance is recommended every year to ensure compliance with safety standards (DGUV V3, EN 60335-2-69). Before contacting the repair technician, note exactly the observed malfunction: does the switch no longer turn? Is it stuck in one position? Do the positions no longer correspond to the expected function? This information will help the technician quickly diagnose the problem and proceed with the appropriate replacement without endangering the device or the user.

Q: Why won't my Spit AC1630P vacuum cleaner start and how can I resolve this issue?

If your Spit AC1630P vacuum cleaner won't start, several causes may be responsible. Here are the steps to follow to identify and resolve this issue: 1. Check the power supply Make sure the vacuum cleaner is properly plugged into a working outlet. Test the electrical outlet with another device to confirm it is functioning correctly. Examine the power cord for any damage, cuts, or bends. A damaged cord may prevent it from starting. 2. Check the power button Ensure that the power switch is in the

Question 1

What are the most common faults of the Spit AC1630P vacuum cleaner?

Accepted Answer

The Spit AC1630P (power 1600 W, capacity 32 L) may encounter some specific malfunctions, but according to the official documentation, most of them are not due to defects in the vacuum cleaner itself, but to insufficient maintenance or improper use.

Loss of suction power: This is the most common problem. It is usually caused by a dirty cartridge filter (designed for continuous automatic cleaning) that needs to be cleaned, a full filter bag that needs to be replaced, a full container that needs to be emptied, or a clogged motor protection filter that needs to be cleaned. Also, check that the nozzle, tube, or suction hose (length 5 m, diameter 35 mm) are not obstructed.

The vacuum cleaner does not start: Before any diagnosis, check that the power plug is properly connected to a functional power outlet, and that the lid is correctly closed (safety system). Then, check the mains fuse. If the 8 m power cable shows visible damage, it must be replaced. In standby mode (positions >A< or >AC<, reserved for electric or pneumatic tools), the vacuum cleaner only starts when a tool is plugged into its integrated socket: set the switch to >I< for direct operation.

The vacuum cleaner does not start when plugging in an electric tool: Check that the tool is properly plugged into the vacuum cleaner's socket itself (the total capacity must not exceed 2000 W and 16 A). If the solenoid valve of the pneumatic on/off unit is contaminated, rinse it with alcohol. Ensure that the PE disposal bag is not sucked against the filter: if so, adjust the rotary slider to the OPEN position.

Dust accumulation in the container: This phenomenon, on M or H class vacuum cleaners, occurs when the rotary slider of the filter cassette is not in the CLOSE position. Adjust it correctly according to the type of filter used.

Preventive maintenance: To keep your AC1630P in good working condition, regularly clean the cartridge filters (benefiting from automatic cleaning), replace the filter bag as soon as it is full, empty the 32 L container when it is full, and check the integrity of the cable and accessories. Clean the container and accessories with water only (avoid acids, acetone, and solvents). According to the manufacturer, a technical efficiency test should be carried out at least once a year by a trained professional.

Replacement of filter cassettes: If, after cleaning the folded cassettes and replacing the filter bag, the suction power decreases and does not return to normal, the folded filter cassettes must be replaced. For any repairs beyond routine maintenance, contact customer service: poorly repaired vacuum cleaners pose dangers to the user.

Question 2

How do I disassemble the switch of the Spit AC1630P vacuum cleaner?

Accepted Answer

Disassembling the switch of the Spit AC1630P vacuum cleaner is a delicate operation that involves the electricity of the device. According to the manufacturer's instructions, repair work should be entrusted exclusively to specialized personnel, such as Spit customer service, as a poorly repaired device poses risks to the user's safety.

If you need to access the control panel to check the connections or inspect the rotary switch (positions 0, I, A, AC), here are the preliminary steps: make sure to unplug the vacuum cleaner from the power outlet and let it cool down. Then open the side latches that hold the top cover, and lift the cover. Inside, you will find the switch panel (③) and the rotary switch (④) that control the device. However, completely removing this switch requires disconnecting the electrical wires and dismantling the fasteners, which exposes you to the risk of electric shock or short circuit if you do not have the required skills.

Replacement parts for the AC1630P switch must be original Spit and installed by an authorized technician. If your switch is no longer functioning properly (stuck, electrically faulty, or out of the standard positions 0 / I / A / AC), contact Spit customer service or an authorized repairer. For a professional vacuum cleaner of this class, regular maintenance is recommended every year to ensure compliance with safety standards (DGUV V3, EN 60335-2-69).

Before contacting the repair technician, note exactly the observed malfunction: does the switch no longer turn? Is it stuck in one position? Do the positions no longer correspond to the expected function? This information will help the technician quickly diagnose the problem and proceed with the appropriate replacement without endangering the device or the user.

Question 3

Why won't my Spit AC1630P vacuum cleaner start and how can I resolve this issue?

Accepted Answer

If your Spit AC1630P vacuum cleaner won't start, several causes may be responsible. Here are the steps to follow to identify and resolve this issue:

1. Check the power supply

Make sure the vacuum cleaner is properly plugged into a working outlet.
Test the electrical outlet with another device to confirm it is functioning correctly.
Examine the power cord for any damage, cuts, or bends. A damaged cord may prevent it from starting.

2. Check the power button

Ensure that the power switch is in the

User manual Spit : user manuals and guides in PDF

Models Spit most viewed

Browse manuals Spit by appliance type

Recent questions about devices Spit