How to install and register a new SIM card on the BlackVue DR750LW2CH for it to work properly?

Question

Accepted Answer

To install and register a new SIM card on your BlackVue DR750LW2CH dashcam, follow the steps below:

Installing the new SIM card

Turn off the device: Make sure the camera is completely powered off before handling the SIM card.
Remove the old SIM card: Locate the SIM slot on the side or underneath the device. Use a suitable tool (like a pin or a straightened paperclip) to eject the SIM tray and remove the old card.
Insert the new SIM card: Place the new SIM card in the tray with the gold chip oriented correctly (usually facing down) and reinsert the tray into the device until it clicks into place.
Restart the camera: Turn on your BlackVue DR750LW2CH and wait for the system to fully boot up.

Registering and activating the SIM card

For the new SIM card to work with your device, you need to register it with your mobile operator:

Note the ICCID number of the SIM card, usually printed on the card itself.
Access your mobile operator's website or app.
Follow the activation or registration procedure by providing the requested information, such as the ICCID number and your personal data.
Once the registration is validated, the SIM card will be activated and ready to be used in your dashcam.

Checking the connection

After activation, check that your BlackVue DR750LW2CH detects the SIM card and that the network connection is active. You can do this via the BlackVue mobile app or by checking the network indicators on the device.

If you encounter difficulties during installation or registration, contact your operator's customer service or BlackVue support for personalized assistance.

User manual BlackVue : user manuals and guides in PDF

Models BlackVue most viewed

Browse manuals BlackVue by appliance type

Recent questions about devices BlackVue